Scribd
Upload
725 views1 page

WPS D1.3-2012 Blank

This welding procedure specification outlines the materials, equipment, and parameters for a groove weld on sheet steel using gas metal arc welding. The base metals are sheet steel with thickness ranging between [thickness range] and the filler metal is a [filler metal specification] wire. The joint design is a groove weld backed with [backing type] and the shielding gas is a [gas mixture] flowing at [flow rate] cubic feet per hour. The welding parameters include an electrical current of [current type], electrode diameter of [size], welding voltage of [voltage], and travel speed of [travel speed].

Uploaded by

pjbedel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
725 views1 page

WPS D1.3-2012 Blank

This welding procedure specification outlines the materials, equipment, and parameters for a groove weld on sheet steel using gas metal arc welding. The base metals are sheet steel with thickness ranging between [thickness range] and the filler metal is a [filler metal specification] wire. The joint design is a groove weld backed with [backing type] and the shielding gas is a [gas mixture] flowing at [flow rate] cubic feet per hour. The welding parameters include an electrical current of [current type], electrode diameter of [size], welding voltage of [voltage], and travel speed of [travel speed].

Uploaded by

pjbedel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
  • Welding Procedure Specification: This section includes a form template detailing the technical specifications and parameters for welding, such as joints, base metals, fillers, electrodes, and electrical currents.

Welding Procedure Specification

Company Name: WPS Number: Welding process: Company location: Revision Number: Mode of transfer: Date: Supporting PQR Number(s): Method of Application:

W.P. S.

JOINTS (Table 4.1)


Type of joint: Groove welded from: Backing: Yes No Type of weld: Backing Type:

BASE METAL (Table 1.2)


Sheet Steel Support Steel: Sheet Steel: Sheet Steel: Material Specification Type: Grade: Type: Grade: Thickness range Support Steel: Type: Coatings Thickness: Thickness:
sketch of joint detail

Support Steel: Type:

FILLER METAL (Table 1.2)


Specification: Feed Type: (GTAW only)

Classification: Type: Classification: Progression: Polarity: Min Temp:

SHIELDING GAS (see [Link])


Mixture:

ELECTRODE (GTAW)
Size:

Flow rate; (CFH)

POSITIONS (Table 1.3)


Fillet

Flux Type (SAW only): PREHEAT (see 1.1.1 & 5.1)


Max Temp:

Groove:

Electrical Current
Type:

Technique
Pass Number Electrode Diameter Welding amps/ Wire feed speed Welding volts Travel speed/ Spot time Contact to work distance/ arc length

This procedure may vary due to fabrication, sequence, fit-up, pass size, etc. within the limitation of variables given in ANSI/AWS D1.3 ( ), Structural Welding Code-Sheet Steel.

Written by: Date:

Authorized by:

Signature: _____________________________________

You might also like