Scribd
Upload
79 views2 pages

HCD665SC & HCD666SC Crystal Oscillator Specs

This document provides specifications for the HCD665SC and HCD666SC 12V OCXO oscillators. Both oscillators offer high frequency stability, fast warm up times, and operate over a temperature range of -20 to +70°C. The main differences are that the HCD665SC provides a sine wave output while the HCD666SC provides HCMOS/TTL compatible output. Standard frequencies are 5.0MHz and 10.0MHz but custom frequencies from 4.0-16.0MHz are available.

Uploaded by

Cristiano Bruschini
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
79 views2 pages

HCD665SC & HCD666SC Crystal Oscillator Specs

This document provides specifications for the HCD665SC and HCD666SC 12V OCXO oscillators. Both oscillators offer high frequency stability, fast warm up times, and operate over a temperature range of -20 to +70°C. The main differences are that the HCD665SC provides a sine wave output while the HCD666SC provides HCMOS/TTL compatible output. Standard frequencies are 5.0MHz and 10.0MHz but custom frequencies from 4.0-16.0MHz are available.

Uploaded by

Cristiano Bruschini
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

12V OCXO Fast Warm Up

HCD665SC & HCD666SC


Specifications
HCD665SC: Sine wave output
HCD666SC: HCMOS / TTL output

Parameters

666SC

Frequency stability:
2x10-10 / day at despatch
2x10-8 / year max
1x10-9 per 10% change in VDD
5x10-10 per 10% change in load

Short term stability (1 sec):


5x10-12 (5.0MHz)
1x10-11 (10.0MHz)

Temperature stability:
3x10-9 over -20 to +70C

Operating temperature range:


-20 to +70C
Other options from -40C

Storage temperature range:


-40 to +90C

Frequency range: 4.0 ~ 16.0MHz


(5.0 & 10.0MHz are standard)

51.00 (max)

25.00
(max)

5.00

1.00
21.00

21.00

41.00
(max)

32.00

BOTTOM VIEW
PIN

CONNECTION

Ground

Freq adjustment

Ref voltage out

Supply

RF output

VOLTAGE CONTROL
3
2

10k multi-turn
1k

Scale 1:1

Features

Output waveform:
Sine wave, 7dBm (1dBm) into 50
Other options to +13dBm into 50
HCMOS / TTL compatible
Frequency adjustment:
5x10-7 typ, +0.5 to +7.0V
(sufficient for 10 years ageing min)
Stabilised +7.0V supply provided

Fast warm up
Standard European pin-out
High performance

Supply voltage (VDD):


+12.0V (0.5V)
Other options from 12~30V

Power consumption:
10.0W max at switch on
1.3W typ when stabilised at 25C

Warm up:
1x10-8 after 4.5mins at -20C
1x10-8 after 2.25mins at +25C

Phase noise (@ 10.0MHz):


< -130dBc/Hz @ 10Hz
< -145dBc/Hz @ 100Hz
< -155dBc/Hz @ 1kHz
< -158dBc/Hz @ 10kHz
< -160dBc/Hz @ 50kHz

IEC 68-2-27 Test Ea


50G for 11ms

Vibration:
IEC 68-2-06 Test Fc
10-55Hz, 1.5mm. 55-500Hz, 10G

Standard. Optional - Please specify required code(s) when ordering

Ordering Information
Product name + option codes (if any) + frequency
eg: HCD665SC 10.0MHz
HCD666SC 5.0MHz
Option code X (eg HCD665SC/X) denotes a custom spec.

Tel: +44 1460 256 100


03 Mar 2000

Fax: +44 1460 256 101

E-mail: sales@[Link]

Web: [Link]

specify

specify

Shock:

Option
Codes

SC cut overtone crystal


Custom options available

Product
665SC

specify

This datasheet has been downloaded from:


[Link]
Datasheets for electronic components.

You might also like