Scribd
Upload
633 views2 pages

Gear Design Calculation Overview

This document contains gear design calculations and information for providing gear data on a drawing. It lists 16 items describing the key specifications of a gear set, including the number of teeth, module, pressure angle, diameters, and center distance. It also lists standard information like type of gear, heat treatment class, accuracy grade, and profile parameters that would typically be provided on a gear drawing.

Uploaded by

omprakashd4196
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
633 views2 pages

Gear Design Calculation Overview

This document contains gear design calculations and information for providing gear data on a drawing. It lists 16 items describing the key specifications of a gear set, including the number of teeth, module, pressure angle, diameters, and center distance. It also lists standard information like type of gear, heat treatment class, accuracy grade, and profile parameters that would typically be provided on a gear drawing.

Uploaded by

omprakashd4196
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd

ear Design Calculation

Sr.No. Descreption Symbol Equatation


1 No. of Teeth on Pinion z1 27
2 No.of Teeth on Gear z2 27
3 Module m 3
4 Pressure Angle ? 20
5 Addendum ha 3
6 Dedendum hf 3.75
7 Tip Clearence c 0.75
8 Total Tooth Height h 6.75
9 Pitch Diameter d 81
10 Base Circle Diameter db 33.1
11 OutsidE Diameter da 87
By another formula 87
12 Root Diameter df 73.5
73.5
13 Center Distance a 81
14 Thickness of tooth per module at the root
15 Thickness of tooth at the Root
Sum of logarithmic coefficients for determining the allowable tangential
16 tooth load
nformation For Giving Gear Data on Drawing
Type of Gear Rack
Heat Treatment 55-60 HRC
Class of Accuracy Grade-8
Module Normal mn 3
Axial mx
Transverse mt
No. of Teeths /Starts z 27
Basic Profile Pressure Angle ? 20
Addenddum ha 3
Bottom Clearance c 0.75
Addendum Modification Coeffiecient x
Shifting of Base Profile xm
Helix Angle ?
Hand of the Helix
Lead Angle ?
Lead pz
Pitch Circle Diameter d 81
Theoretical Tooth Depth a 6.75

Base Circle Diameter db 33.05464700688


Root Diameter
Inspection Data (In Normal df
Plane) Base Tangent Length Wk
Chordal Tooth Thickness s
Chordal Height ha
Allowable Errors

Mating Gear/Worm Drawing No.


No. of Teeth /Starts z
Center Distance a'
Shaft Angle ?

ear Design Calculation Sr.No. Descreption Symbol Equatation 1 No. of Teeth on Pinion z1 27 2 No.of Teeth on Gear z2 27 3 Modu
nformation For Giving Gear Data on Drawing Type of Gear Rack Heat Treatment 55-60 HRC Class of Accuracy Grade-8 Module Normal

You might also like