Works:Chhendipara Road,SH- 63 P O Nisha Angul(Orissa)-759 130 INDIA Email:[email protected] Registered Office:Post box No.
6 ,O P Jindal Marg ,Hisar (Haryana) Corporate Office :Jindal Center,12 Bhikaji Cama Palace, New Delhi -110066 INDIA Phone No.:-(07762) 227001-227010; Fax :-07762 -227021-227022 :Gram PIG IRON
JINDAL STEEL & POWER LIMITED
TEST CERTIFICATE FOR HOT ROLLED MEDIUM AND HIGH TENSILE STRUCTURAL STEEL
Test Method :Tensile:IS 1608:Bend:IS 1599; Impact:IS 1757; Chemical :ASTM E 415/IS 8811
Test Certificate No. 0000001419 To, M/s MCNALLY BHARAT ENGINEERING CO.LIMIT ANGUL
We Certify that the material described below fully conforms to IS 2062 : 2011. Chemical composition and mechanical properties of the product as tested in accordance with the Scheme of testing and inspection contained in the BIS certification marks licence No. CM/L-5639985 are as indicated below against each Heat Number. (PLEASE REFER TO IS 2062:2011 FOR DETAILS OF SPECIFICATION REQUIREMENT)
Date : 16.02.2013
Page 1 of 2
TEST RESULTS
Process of Manufacture : EAF->LRF->CCM->RHF->Hot rolling
(EAF - Electric Arc Furnace / LRF: Ladle Refining Furnace / VD : Vaccum Degassing / CCM : Continuous Casting Machine/ RHF : Re-Heating Furnace)
Supply Condition:AS ROLLED Deoxidation : Killed
Heat No Plate No.of Wt. MT No Pcs.
Material Grade : IS2062 E250 BR Plate Dimension -Thickness x Width x Length : 25.00mm x 2500mm x 10.000m Chemical Analysis
L/P %C 0.18 %Mn %S %P %Si %Al %Cu %V %Nb %Ti %Mo %Ni %B %Cr N2 ppm 62 CE 0.31 YS Mpa 280 285 UTS Mpa 465 460
Mechanical Properties
%EL* Bend Test Mand Dia. 27 OK(2.0 T) 26 OK(2.0 T) I II Impact Value at(J) III Avg Temp 0C Orien
3203418 EB0 3203418 EB0
4.926 L
0.80 0.008 0.013 0.10 0.029 0.005 0.010 0.003 0.002 0.002 0.003 0.0003 0.010
Sub Total 1 4.926 Material Grade : IS2062 E250 BR Plate Dimension -Thickness x Width x Length : 25.00mm x 2500mm x 11.000m Heat No Plate No.of Wt. MT Chemical Analysis
No Pcs.
L/P %C 0.17 0.17 %Mn %S %P %Si %Al %Cu %V %Nb %Ti %Mo %Ni %B %Cr N2 ppm 73 64 CE 0.31 0.30 YS Mpa 289 290 272 274 UTS Mpa 433 437 472 471
Mechanical Properties
%EL* Bend Test Mand Dia. 27 OK(2.0 T) 29 OK(2.0 T) 27 OK(2.0 T) 27 OK(2.0 T) I II Impact Value at(J) III Avg Temp 0C Orien
3203463 3203463 3203487 3203487
CB0 CB0 AB0 AB0
1 1 2
4.926 L 4.927 L 9.853
0.83 0.011 0.009 0.10 0.035 0.005 0.005 0.003 0.002 0.002 0.005 0.0003 0.006 0.80 0.009 0.012 0.09 0.035 0.005 0.005 0.003 0.002 0.002 0.004 0.0003 0.008
Sub Total
Remarks: Revised TC dated 08-03-2013
The Material supplied conforms to the tolerances as per IS:1852. UltraSonic Examination : All the above plates are ultrasonically tested as per ASTM A-435 and found ok Purchase Order No. & Date: 10024764 30.01.2013 Despatch Advice No: 61205821 Prepared by BSAHU Truck/Wagon No. OR05Z5785 Preparation Date :16.02.2013 12:31:21
* Gauge Length: 5.65(SO)1/2
Printing Date 08.03.2013 & Time 15:44:39
Authorised Signatory QA/QC PlateMill For, JINDAL STEEL & POWER LIMITED
Works:Chhendipara Road,SH- 63 P O Nisha Angul(Orissa)-759 130 INDIA Email:[email protected] Registered Office:Post box No. 6 ,O P Jindal Marg ,Hisar (Haryana) Corporate Office :Jindal Center,12 Bhikaji Cama Palace, New Delhi -110066 INDIA Phone No.:-(07762) 227001-227010; Fax :-07762 -227021-227022 :Gram PIG IRON
JINDAL STEEL & POWER LIMITED
TEST CERTIFICATE FOR HOT ROLLED MEDIUM AND HIGH TENSILE STRUCTURAL STEEL
Test Method :Tensile:IS 1608:Bend:IS 1599; Impact:IS 1757; Chemical :ASTM E 415/IS 8811
Test Certificate No. 0000001419 To, M/s MCNALLY BHARAT ENGINEERING CO.LIMIT ANGUL
We Certify that the material described below fully conforms to IS 2062 : 2011. Chemical composition and mechanical properties of the product as tested in accordance with the Scheme of testing and inspection contained in the BIS certification marks licence No. CM/L-5639985 are as indicated below against each Heat Number. (PLEASE REFER TO IS 2062:2011 FOR DETAILS OF SPECIFICATION REQUIREMENT)
Date : 16.02.2013
Page 2 of 2
TEST RESULTS
Process of Manufacture : EAF->LRF->CCM->RHF->Hot rolling
(EAF - Electric Arc Furnace / LRF: Ladle Refining Furnace / VD : Vaccum Degassing / CCM : Continuous Casting Machine/ RHF : Re-Heating Furnace)
Supply Condition:AS ROLLED Deoxidation : Killed
Heat No Plate No.of Wt. MT No Pcs.
Material Grade : IS2062 E250 BR Plate Dimension -Thickness x Width x Length : 25.00mm x 2500mm x 11.500m Chemical Analysis
L/P %C 0.17 0.17 0.18 %Mn %S %P %Si %Al %Cu %V %Nb %Ti %Mo %Ni %B %Cr N2 ppm 73 64 65 CE 0.31 0.30 0.31 YS Mpa 289 290 272 274 280 285 UTS Mpa 433 437 472 471 460 465
Mechanical Properties
%EL* Bend Test Mand Dia. 27 OK(2.0 T) 29 OK(2.0 T) 27 OK(2.0 T) 27 OK(2.0 T) 27 OK(2.0 T) 26 OK(2.0 T) I II Impact Value at(J) III Avg Temp 0C Orien
3203463 3203463 3203487 3203487 3203635 3203635
CA0 CA0 AA0 AA0 FA0 FA0
1 1 1 3 6
6.158 L 6.158 L 6.025 L 18.341 33.120
0.83 0.011 0.009 0.10 0.035 0.005 0.005 0.003 0.002 0.002 0.005 0.0003 0.006 0.80 0.009 0.012 0.09 0.035 0.005 0.005 0.003 0.002 0.002 0.004 0.0003 0.008 0.79 0.004 0.012 0.11 0.022 0.005 0.008 0.003 0.002 0.008 0.0004 0.008
Sub Total G Total
Remarks: Revised TC dated 08-03-2013
The Material supplied conforms to the tolerances as per IS:1852. UltraSonic Examination : All the above plates are ultrasonically tested as per ASTM A-435 and found ok Purchase Order No. & Date: 10024764 30.01.2013 Despatch Advice No: 61205821 Prepared by BSAHU Truck/Wagon No. OR05Z5785 Preparation Date :16.02.2013 12:31:21
* Gauge Length: 5.65(SO)1/2
Printing Date 08.03.2013 & Time 15:44:39
Authorised Signatory QA/QC PlateMill For, JINDAL STEEL & POWER LIMITED
