0% found this document useful (0 votes)
163 views2 pages

MPPT Battery Charger Spec

The SunSaver MPPT solar controller uses maximum power point tracking technology to maximize energy harvest from photovoltaic systems and provide battery charging and load control. It has a peak efficiency over 97%, supports arrays up to 400 watts, and includes protections, data logging, and optional remote monitoring.

Uploaded by

nish1802
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
163 views2 pages

MPPT Battery Charger Spec

The SunSaver MPPT solar controller uses maximum power point tracking technology to maximize energy harvest from photovoltaic systems and provide battery charging and load control. It has a peak efficiency over 97%, supports arrays up to 400 watts, and includes protections, data logging, and optional remote monitoring.

Uploaded by

nish1802
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

SUNSAVER MPPT

SOLAR CONTROLLER

Solar Controller with Maximum Power Point Tracking

15 Amps at 12/24 Volts DC

Morningstars SunSaver MPPT solar controller with TrakStar Technology is an advanced maximum power point tracking (MPPT) battery charger for off-grid photovoltaic (PV) systems. The controller features a smart tracking algorithm that maximizes the energy harvest from the PV and also provides load control to prevent over discharge of the battery. The SunSaver MPPT is well suited for both professional and consumer PV applications including automatic lighting control. Its charging process has been optimized for long battery life and improved system performance. This product is epoxy encapsulated for environmental protection, may be adjusted by the user via four settings switches or connection to a personal computer, and has an optional remote meter and battery temperature sensor.

Key Features and Benefits:  Maximizes Energy Harvest


Our TrakStar MPPT Technology features:  peak efficiency of over 97%  almost no power losses  recognition of multiple power peaks during shading or mixed PV arrays  excellent performance at low solar insolation levels

 maller Size S
Mechanical dimensions are less than other MPPT controllers, making it easier to install in equipment enclosures.

 ighly Reliable H
Efficient electronics, a conservative thermal design and tropicalization result in high reliability and long life.

 se of High Voltage Modules U


Enables the use of high voltage and thin film modules for off-grid battery charging.

 ully Adjustable F
User selection via on-board switches or PC connection.

 onverts 36V or 24V PV Arrays C


Provides a means to use up to a 36V PV array to charge either a 24V or 12V battery.

 xtensive Electronic Protections E


Fully protected against most system errors and faults.

 onger Battery Life L


Efficient MPPT tracking and 4-stage charging increases battery life.

 ower System Cost L


Less expensive than other MPPT controllers and is affordable in smaller PV systems up to 400Wp. Allows system costs to be reduced by down-sizing the PV array, using on-grid or thin film modules and decreasing cable sizes.

 ore Information M
The status LEDs and optional meter provide extensive controller and system data.

 utomatic Lighting Control A


Up to four programmable timer sequences for PV lighting applications.

 ata Logging D
Records key operating parameters of the PV system and includes 30 days of data logging.

S S

UN AVER MPPT
MPPT Advantage

TM

SOLAR CONTROLLER
SS-MPPT Efficiency (12 Volts)
98% 96%
MPPT Charging

SOLAR CONTROLLER

94% Efficiency (%) 92% 90% 88% 86% 84% 82%

17 Vmp

Current

Non-MPPT Charging

PV I-V Curve

S TT WA

BATTERY VOLTAGE RANGE

10 Voltage

15V

~17V

80%

25

50

75 100 125 Output Power (Watts)

150

175

200

TE C HNI C AL S P E C I F I C ATION S Electrical


Peak Efficiency Nominal Battery Voltage Max. Battery Current Battery Voltage Range Max. PV Open Circuit Voltage Nominal Max. PV Input 12 volt battery 24 volt battery Output Rating Self Consumption Transient Surge Protection 97.5% 12 or 24 volts 15 amps 7-36 volts 75 volts 200 Watts 400 Watts 15 amps load control 35 milliamps 4 x 1500 Watts 40C to +60C 55C to +100C 100% non-condensing Epoxy encapsulation Conformal coating Marine rated terminals

Battery Charging
Battery Types 4 Stage Charging Temperature Compensation Coefficient Range Set points Gel, Sealed, AGM, Flooded Bulk, absorption, float, equalize (optional) 5mV/C / cell (25C ref) 30C to +60C Absorption, float, equalize 16.9 x 6.4 x 7.3 cm 6.6 x 2.5 x 2.9 inch 0.60 kg / 1.3 lbs 16 mm2 / #6 AWG Die cast aluminum with plastic cover

Mechanical
Dimensions Weight Power Terminal Enclosure

Environmental
Operating Temperature Storage Temperature Humidity Tropicalization

Options
Remote Meter Remote Temperature Sensor PC MeterBus Adapter DIN Rail Mounting Clips

Electronic Protections
PV: Overload, Short Circuit, High Voltage Load: Overload, Short Circuit Reverse Polarity: Battery, PV and Load Lightning and Transient Surges High Temperature Reverse Current at Night

Certifications
CE Compliant RoHS Compliant Manufactured in a certified ISO 9001 facility UL1741 / CSA.107.1 recognized component

Warranty: Five year warranty period. Contact Morningstar or your authorized distributor for complete terms. Authorized Morningstar Distributor: 8 Pheasant Run Newtown, PA 18940 USA Tel: +1 215-321-4457fax: +1 215-321-4458 e-mail: [email protected] website: www.morningstarcorp.com
Printed in USA 219E-R4-10/11

RECOGNIZED COMPONENT

3094762

You might also like