Scribd
Upload
125 views

Concrete Maturity Notes

This document discusses the maturity method for predicting concrete strength. The maturity method uses the temperature history of concrete to determine a maturity index, which can then be used to estimate the concrete's compressive strength. The document outlines the procedure for developing a strength-maturity relationship curve through laboratory testing, then using that curve to determine the strength of in-place concrete by measuring its maturity index. An example problem demonstrates how to use the maturity method to calculate the time required for concrete to reach a specified strength before removing forms.

Uploaded by

Shafiullah Khan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
125 views

Concrete Maturity Notes

This document discusses the maturity method for predicting concrete strength. The maturity method uses the temperature history of concrete to determine a maturity index, which can then be used to estimate the concrete's compressive strength. The document outlines the procedure for developing a strength-maturity relationship curve through laboratory testing, then using that curve to determine the strength of in-place concrete by measuring its maturity index. An example problem demonstrates how to use the maturity method to calculate the time required for concrete to reach a specified strength before removing forms.

Uploaded by

Shafiullah Khan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

CM

CM 420
420

Temporary Structures

Maturity Method in Concrete


CM
CM 420
420

Temporary Structures

Maturity Method
CM 420
Temporary Structures

CM
CM 420
420

Temporary Structures

Using Maturity Method to Predict


Concrete Strength
Maturity Meter - Field test for determining maturity. ASTM C1074 / C918.

Determination of the strength of in-place


concrete is obviously important to
contractors.
Decisions such as when to strip forms, when
to post-tension, when to remove shores, and
when to terminate cold-weather protection
are based on reaching a minimum level of
concrete strength.
Waiting too long to perform these operations
is expensive, but acting prematurely may
cause the structure to crack or collapse.
1

CM
CM 420
420

Temporary Structures

Failures due to Improper Form


stripping and shore removal

Professor Kamran M. Nemati


Winter Quarter 2007

CM
CM 420
420

Temporary Structures

Maturity Method in Concrete


CM
CM 420
420

Temporary Structures

Using Maturity Method to Predict


Concrete Strength
The information used to make these
decisions is usually obtained from fieldcured cylinders, pullout tests, or
penetration testing.
The maturity method is another technique
that can be used to estimate the strength
of in-place concrete.
This nondestructive method has not been
widely used in the U.S. The adoption of
ASTM standard practice for estimating
concrete strength by maturity method
(ASTM 1074) has increased its use.

CM
CM 420
420

Temporary Structures

Using Maturity Method to Predict


Concrete Strength
The Strength-Maturity Relationship

The maturity method is simply a


technique for predicting concrete
strength based on the temperature
history of the concrete.
Strength increases as cement hydrates.
The amount of cement hydrated depends
on how long the concrete has cured and
at what temperature.
Maturity is a measure of how far
hydration has progressed.

CM
CM 420
420

Temporary Structures

Using Maturity Method to Predict


Concrete Strength

The Strength-Maturity Relationship


The most common expression used for maturity
is the maturity temperature-time factor M(t):
where:

M (t ) = (Ta T0 )t

Ta = average concrete temperature during each


time interval
T0 = temperature below which cement hydration
is assumed to cease.
t = time intervals, days or hours
= summation of all the intervals of time
multiplied by temperature.
5

Professor Kamran M. Nemati


Winter Quarter 2007

CM
CM 420
420

Temporary Structures

Maturity Method in Concrete


CM
CM 420
420

Temporary Structures

Using Maturity Method to Predict


Concrete Strength
The Strength-Maturity Relationship

The temperature below which cement


hydration is assumed to cease may depend
on admixture type and dosage, cement
type, and temperature range that the
concrete experiences while hardening.
A value of 32F is recommended for
concrete made with Type I cement, no
admixture, and a curing temperature range
of 32 to 104F.
For other conditions, the value can be
determined experimentally.
6

CM
CM 420
420

Temporary Structures

Using Maturity Method to Predict


Concrete Strength
The Strength-Maturity Relationship

When using this equation, the maturity


factor is expressed as degree-days or
degree-hours.
For example, a maturity of 400 degreehours might be required before stripping
forms.
Samples of a given concrete mix exposed
to different time and temperature conditions
are assumed to attain equal strengths if
they attain equal maturity values.

CM
CM 420
420

Temporary Structures

Using Maturity Method to Predict


Concrete Strength

The Strength-Maturity Relationship


Direct reading maturity devices are preset for
an assumed temperature below which cement
hydration ceases.
The displayed values may
have to be corrected if this
assumed temperature differs
from the true temperature
below which hydration
ceases. ASTM standard
practice tells how to make
the corrections.
8

Professor Kamran M. Nemati


Winter Quarter 2007

CM
CM 420
420

Temporary Structures

Maturity Method in Concrete


CM
CM 420
420

Temporary Structures

Using Maturity Method to Predict


Concrete Strength

Procedure to Develop Strength-Maturity Relationship


1.Prepare at least 15 cylindrical concrete specimens.
The mix proportions and constituents of the
concrete shall be similar to those of the concrete
whose strength will be estimated using this practice.
2.Embed temperature sensors at the centers of at
least two specimens. Connect sensors to maturity
instruments or to temperature-recording devices.
3.Moist cure the specimens in a water bath or in moist
room.
4.Perform compression tests at ages of 1, 3, 7, 14, and
28 days. Test two cylinders at each age and
compute the average strength.
5.At each test age record the average maturity index
for the instrumented specimens.
9

CM
CM 420
420

Temporary Structures

Using Maturity Method to Predict


Concrete Strength

Procedure to Develop Strength-Maturity Relationship


6.On graph paper, plot the average compressive strength
as a function of the average value of the maturity index.
Draw the best-fit curve through the data. The resulting
curve is the strength-maturity relationship to be used for
estimating the strength of the concrete.

10

CM
CM 420
420

Temporary Structures

Using Maturity Method to Predict


Concrete Strength

Procedure to Estimate Strength of In-Place Concrete


1.As soon as practicable after concrete placement,
embed temperature sensors into the fresh concrete.
2.Connect sensor to maturity instruments or
temperature-recording devices and activate the
recording devices as soon as practicable.

11

Professor Kamran M. Nemati


Winter Quarter 2007

CM
CM 420
420

Temporary Structures

Maturity Method in Concrete


CM
CM 420
420

Temporary Structures

Using Maturity Method to Predict


Concrete Strength

Procedure to Estimate Strength of In-Place Concrete


3.When the strength at the location of a sensor is to
be estimated, read the value of the maturity index
from the maturity instrument or evaluate the
maturity index from the temperature record.
4.Using the strength-maturity relationship developed
before, read off the value of compressive strength
corresponding to the measured maturity index.

12

CM
CM 420
420

Temporary Structures

Using Maturity Method to Predict


Concrete Strength
Procedure to Estimate In-Place Strength

Prior to performing critical operations, such as


formwork removal or post-tensioning,
supplement determination of the concrete
maturity with other tests to ensure that the
concrete in the structure has a potential
strengths that is similar to that of the concrete
used to develop the strength-maturity
relationship. Appropriate techniques include:

In-place test that give indications of strength


Early-age compressive strength tests of standard
cured specimens, and fc tests on concrete as
delivered.
13

CM
CM 420
420

Temporary Structures

Maturity Meter Example

In a concrete wall construction, the


contractor can remove the forms once the
compressive strength of 2,500 psi is
reached. Estimate the approximate length
of time that the contractor has to wait
before removing the forms.
Assume the cement hydration will cease at
14F and the temperature of the concrete at
the time of opening is 67F.
The strength-maturity relationship for the
concrete mix used in the project is given.
14

Professor Kamran M. Nemati


Winter Quarter 2007

CM
CM 420
420

Temporary Structures

Maturity Method in Concrete


CM
CM 420
420

Temporary Structures

Maturity Meter Example

1450
15

CM
CM 420
420

Temporary Structures

Maturity Meter Example

From the strength-maturity


relationship curve:

TTF 1450 Deg-Hours

TTF = M (t ) = (Ta T0 )t
TTF = 1450 = (Ta T0 )t (67 14 )t = 1450 t =

1450
= 27.4 hours
53

The contractor has to wait at least 27


hours and 21 minutes after the concrete
is placed before removing the forms.
16

Professor Kamran M. Nemati


Winter Quarter 2007

You might also like