Riso EZ570 Error Codes List
Code Description
A04 Master detected on print drum error
0XX System (hardware, software, communication),
A05 Master detected in master-disposal area
Operation panel
1XX Scanning section (scanner, AF), image processing
A06 Check paper-feed tray
A07(J) Paper-feed error
A08(J) Paper jam on print drum
2XX Master making section
A09(J) Paper-ejection error
3XX Master-disposal section
A10(J) AF original feed error
4XX Paper-feed/ejection section
A16 Awaiting for the master to be removed from the
5XX Print-drum area
6XX Printing adjustment section (vertical, horizontal, density)
drum
A17 Cutter error
A34 Requesting for master to be reset
7XX Optional accessories
B (b) Option error
T (P) Serviceman-call error
B01 Keycard counter: No card
T01
Main motor lock
B02 Sorter: Call service error
T02
Elevator motor lock
B03 Sorter: Jam error
T03
Clamp motor lock
B04 Sorter: Door open error
T04
Overflow
B05 Sorter: Error (other)
T05
Print-positioning pulse-motor lock
B21 Hold memory: Read/Write error
T08
Communication error with CI
B22 Job separator: Power OFF
T09
Sorter error
B23 Job separator: No tape
T11
Print pressure pulse motor lock
B24 Job separator: Tape jam
T12
Master disposal area motor lock
B25 Sorter: Tray full error
T13
Cutter motor lock
B26 Sorter: Paper remaining on tray error
T14
Flatbed error
B27 Sorter: Stapler error
T15
AF error
B28 Sorter: Size error
T17
Solenoid counter not connected
B29 USB Memory: No compatibility (w/ USB HUB)
T18
Drum-lock solenoid lock
B30 USB Memory: No compatibility
T19
Thermal-pressure motor lock
B31 Linked printer: Data communication error
T20
Paper-ejection-section motor lock
B32 Network cable not connected
T24
Inking motor lock
B33 IP address setup error
T25
No battery error
B34 Linked printer: error
T89
Master compression plate error
B34 Linked printer: No toner
T91
Operation panel EEPROM error
B35 Linked printer: Call service error
T92
Drum EEPROM write error
B38 USB Memory: Fault create a file
T93
NET-C hardware error
B39 USB Memory: No access
T93
NET-D hardware error
C (c) Consumable error
T94
Call service error: TPH
C01 Replace ink cartridge
T95
FRAM error
C02 Replace master roll
T96
Data not input
C03 Master disposal box full
T97
PC card access error
C04 No paper on the paper feed tray
T98
Hardware error
D (d) Set check error
T99
Software error
D01 Print drum not set
Jam error
D02 Incorrect print drum
A01 Master feed error
D03 Ink cartridge not set
A02 Master loading error
D04 Incorrect ink cartridge
D05 Master not set
D07 Master-disposal box not set
Card Initializing)
F58
D08 Master making unit not set
D09 Master making unit cover not closed
D11
Book editing not available with AF (NET-D
Card Initializing)
F60
Front cover not closed
Master-making confirmation when linked printer is selected ( when print quantity = 0)
D13 Rear cover not closed
F61
Linked printer: Wrong paper size
D17 Incorrect master roll
F62
Linked printer auto selection: Linked printer
D18 Print drum is ready for removal
D19 Master making unit is ready for removal
error
F63
D22 Print drum removal command
D23 AF cover not closed
E
for irregular size original
F64
Warning (Serviceman call)
E01 Replace battery
Linked printer: Auto tray selection not available
Selected function not available while processing print data from PC
F65
E02 Maintenance call
Scan mode: Auto page size selection not available for irregular size original
Warning (Other)
F66
Linked printer: Saddle-stitch error
F01
No master on print drum
F67
Linked printer: Rotation sort error
F02
Master image larger than paper size: 1
F73
Linked printer: Auto tray selection not available
F03
Multi-up printing - Incorrect paper size
F04
User Control: Reach to copy count limit
F05
Print quantity less than the minimum print quantity setting
with selected reproduction ratio
F74
High speed printing: Printer temperature is too
low for 180ppm high speed printing
F78
Editor: Stage cover is opened
F08
Auto tray selection: Wrong paper size
F79
Editor: No original during re-scanning
F10
Master image larger than paper size: 2
F85
External CI: Scanning not possible with exter-
F12
Auto tray selection: Irregular size original
F15
Auto control paper receiving tray: Large paper
nal CI not connected
F86
remaining on the tray
Auto tray selection: Tray cannot be selected
with selected reproduction ratio
F17
Incorrect print drum size
F87
Auto tray selection: Multi-Up not possible
F21
Multi-Up: No original on AF
F88
Auto tray selection: 2-Up selection error
F22
Multi-Up: No original on FB
F89
Interposer mode: Wrong paper size
F24
Auto reproduction: Error between original size
F90
Stock management (ink)
F91
Stock management (master)
F93
Reproduction size: Larger than the master-ma-
and paper size
F31
Auto control paper receiving tray: Paper guide
fence error
king size
F32
Storage data: Storage area full
F94
Protect mode: Discard current master
F33
USB Memory: Capacity is full
F95
Protect mode: Confirmation
F37
Book mode: AF cannot be used
F96
Total Count Volume
F43
AF cannot be used in book mode
F97
Count Charge
F44
Auto reproduction size: Error between original
Parameter value input
size and paper size
H01 Ink color setting
F45
Linked printer error
H02 Print density fine adjustment
F47
Linked printer error - No paper
H03 Proof-print density adjustment (ink)
F48
Multi-Up: Wrong original size
H04 Master-making density
F49
Multi-Up: No original
H05 Print density fine adjustment
F52
Linked printer error - Job interrupted
H06 Proof-print density adjustment (master)
F58
Book editing not available with AF (NET-C
