0% found this document useful (0 votes)
317 views2 pages

Antenna Specs for Wireless Carriers

Kathrein's adjustable electrical downtilt antenna allows wireless carriers to tailor site polarization for optimal performance using variable downtilt. The antenna has a downtilt range of 0-6 degrees, is made of UV resistant fiberglass, and has optional remote control of downtilt. It can accommodate future 3G and UMTS applications.

Uploaded by

AnnBliss
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
317 views2 pages

Antenna Specs for Wireless Carriers

Kathrein's adjustable electrical downtilt antenna allows wireless carriers to tailor site polarization for optimal performance using variable downtilt. The antenna has a downtilt range of 0-6 degrees, is made of UV resistant fiberglass, and has optional remote control of downtilt. It can accommodate future 3G and UMTS applications.

Uploaded by

AnnBliss
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

742 213V01

0o

30

0o

33

Kathreins X-polarized adjustable electrical downtilt antennas offer


the wireless carrier the ability to tailor polarization diversity sites for
optimum performance. Using variable downtilt, only a few models
need be procured to accommodate the needs of widely varying
conditions. Remotely controlled downtilt is available as a retrofitable
option.
0-6 downtilt range.
UV resistant pulltruded fiberglass radome.
DC Grounded metallic parts for impulse suppression.
No moving electrical connections.
Wideband vector dipole technology.
Optional remote downtilt Control.
Will accomodate future 3G / UMTS applications.

65 Panel Antenna

10

30

0o

60

20

30

270o

17102200 MHz
< 1.5:1
50 ohms
IM3: <-150 dBc
+45 and -45
>30 dB (co-polar)
>25 dB (total power)
300 watts per input (at 50C)
06 degrees

0o
21

0o
10

0o

2 x 7-16 DIN female


>30 dB

0o

15

180o

Horizontal pattern
45- polarization

0o

60

20

30

270o

90o

12

0o

0o

24

0o
21

180o

0o

15

Gain
+45 and -45 polarization
horizontal beamwidth
+45 and -45 polarization
vertical beamwidth
Sidelobe suppression for first
sidelobe above main beam

0o

30

25 dB (typical)
>10 dB
0.5 dB
2.0
19.8 lb (9 kg)
24.3 lb (11 kg) clamps included
76.9 x 6.1 x 2.8 inches
(1954 x 155 x 70 mm)
at 93 mph (150kph)
115 lbf / 32 lbf / 115 lbf
(510 N) / (140 N) / (510 N)
M (Medium)
120 mph (200 kph)
88 x 6.8 x 3.6 inches
(2235 x 172 x 92 mm)
28.7 lb (13 kg)
Fixed mounts for 2 to 4.6 inch (50 to 115 mm)
OD masts are included and tilt options are
available.
See reverse for order information.

Specifications:

12

0o

24

33

Frequency range
VSWR
Impedance
Intermodulation (2x20w)
Polarization
Front-to-back ratio
(18030)
Maximum input power
Electrical downtilt
continuously adjustable
Connector
Isolation
Cross polar ratio
Main direction
0
Sector
60
Tracking, average
Squint
Weight

Dimensions

Wind load
Front/Side/Rear

Mounting category
Wind survival rating*
Shipping dimensions

Shipping weight
Mounting

90o

30

General specifications:

Vertical pattern
45- polarization
06 electrical downtilt

17101880 MHz
19 dBi
67 (half-power)

18501990 MHz
19.2 dBi
65 (half-power)

19202200 MHz
19.5 dBi
63 (half-power)

4.7 (half-power)

4.5 (half-power)

4.3 (half-power)

0 2 4 6 T
18 18 16 15 dB

0 2 4 6 T
18 18 17 16 dB

0 2 4 6 T
18 18 18 18 dB

* Mechanical design is based on environmental conditions as


stipulated in TIA-222-G-2 (December 2009) and/or ETS 300
019-1-4 which include the static mechanical load imposed on
an antenna by wind at maximum velocity. See the Engineering
Section of the catalog for further details.

11271-B
936.3740/b
Kathrein Inc., Scala Division Post Office Box 4580 Medford, OR 97501 (USA) Phone: (541) 779-6500
Email: communications@[Link] Internet: [Link]

Fax: (541) 779-3991

742 213V01

65 Panel Antenna

2.5 inches
(64 mm)

64 mm
M8

76.9 inches
(1954 mm)

2 x 738 546 Mounting Kit


(included)

78.6 inches
(1996 mm)
79.8 inches
(2026 mm)

Mounting Options:
Model
2 x 738 546
(included)

850 10013


742 263

Description
Mounting Kit for 2 to 4.6 inch
(50 to 115 mm) OD mast.
4.4 lb (2 kg)
Tilt Mount Kit
011 degrees downtilt angle.
7.4 lb (3.7 kg)
Three-panel Sector Mounting Kit
(120 deg. ea.) for 3.5 inch
(89 mm) OD mast.

2.8 inches
(70 mm)

6.1 inches
(155 mm)

17102200 17102200
-45
+45

7/16 DIN

7/16 DIN

Order Information:
Model
742 213V01

Description
Antenna with 7-16 DIN connectors
06 adjustable electrical downtilt

All specifications are subject to change without notice. The latest specications are available at [Link].
Kathrein Inc., Scala Division Post Office Box 4580 Medford, OR 97501 (USA) Phone: (541) 779-6500
Email: communications@[Link] Internet: [Link]

Fax: (541) 779-3991

You might also like