Scribd
Upload
274 views1 page

Laser Slab Profile Measurement System

The ST202 WidthVIEW laser system uses two triangulation sensors to non-contact measure slab profile, width, and thickness during continuous casting or rolling processes. It provides immediate feedback to operations and quality personnel on dimensions in order to minimize quality issues and optimize control. The ST202 measures profiles ten times per second using high-speed lasers without moving parts, enabling accurate measurements to track vertical slab movement during casting.

Uploaded by

Vinay Rajput
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
274 views1 page

Laser Slab Profile Measurement System

The ST202 WidthVIEW laser system uses two triangulation sensors to non-contact measure slab profile, width, and thickness during continuous casting or rolling processes. It provides immediate feedback to operations and quality personnel on dimensions in order to minimize quality issues and optimize control. The ST202 measures profiles ten times per second using high-speed lasers without moving parts, enabling accurate measurements to track vertical slab movement during casting.

Uploaded by

Vinay Rajput
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

SLAB PROFILE & WIDTH MEASUREMENT

ST202 WidthVIEW

Measurement of slab profile and width is achieved by using


Sequence Technologies ST202 WidthVIEW laser systems
during the continuous casting or rolling process. These noncontact measurement systems are resourceful tools in
monitoring the result of complex changes in the steel making
process and can assist in minimizing quality issues by
providing an early warning of out of tolerance slab dimensions.
As the slab shape varies with changes in parameters such as
cast speed, cooling and steel temperature, the ST202 is an
effective solution for immediate feedback to operations and
quality personnel.

Measurement Principle
The ST202 uses two triangulation sensors that measure shape and width by
projecting a vertical beam of laser light on the slab edge. The profile is
calculated from the image pixel data using the systems proprietary software.

The ST202 WidthVIEW is a non-contact laser


system designed to accurately measure slab narrow
face profile, width and thickness in order to optimize
control of slab dimensions. The ST202 uses two
high speed profile lasers and proprietary software to measure
up to three times faster than other non-contact methods and
more accurate than mechanical calipers. The sensors
measure ten complete edge profiles per second. This sample
rate enables the system to accurately measure profile while
tracking any vertical movement of the slab due to casting
process variables. Unlike other profile systems which use
complex optics and moving components, Sequence
Technologies profile lasers contain no moving parts,
enhancing reliability in harsh steel mill environments.

Close up view

The PC user interface continuously measures and graphically


displays the edge profile, minimum and maximum widths,
thickness, and important system parameters. Customers may
interface with the ST202 system through typical third party
client software such as RSLinx or Kepware for long term
quality assurance reviews.

KEY FEATURES

Edge profile & width accuracy of 0.04 [1.0mm]


Width measurement span: 100 [2540mm]
Thickness measurement range: 410 [101254mm]
10 complete edge profiles per second
Upwards of 600 data points per side defining shape

Tolerance limits for width and bulging


Trending and data logging for quality assurance
Integration with Level 2 systems
No internal moving laser components
Rugged protective enclosures with cooling

BENEFITS

Measurement Software Overview

Optimize production and machine yield


Recognize out of shape and dimension conditions
Optimize width control with feedback to adjustable mold
Reduce edge defects

www.SequenceTechnologies.com

Edge profile and width (total and distance from machine centerline)
Shape index (concavity), thickness and cross sectional area
Width and edge shape trending
Adjustable scale filtering
Laser temperature and signal strength
System communication status & laser performance
Calibration software

Slab Profile & Width Measurement

Email: [email protected]

You might also like