Computer Aided Design
Course code: 3341904
GUJARAT TECHNOLOGICAL UNIVERSITY, AHMEDABAD, GUJARAT
COURSE CURRICULUM
COURSE TITLE: COMPUTER AIDED DESIGN
(Code: 3341904)
Diploma Programme in which this course is offered
Mechanical Engineering
1.
Semester in which offered
4th Semester
RATIONALE
The students of mechanical engineering programme are mainly involved in modelling,
designing, manufacturing, inspection and planning activities (such as preparing design
and production drawing, process plans, preparing bill of materials, etc.) in industries. For
all such activities, reference document is the modelling and drawing of
component/assembly to be manufactured. In this context, it is of utmost importance to
prepare, read and interpret these drawings correctly for production of components and
assemblies accurately and precisely. The industrial practices of modelling and designing
are also important for the students to make them aware of modelling and designing
practices, symbols, codes, norms and standards generally used in industries.
This course has been introduced at Diploma level in order to develop the skills in student
so that they can generate various modelling and digital production drawings as required
by industry using appropriate CAD software.
2.
COMPETENCY
The course content should be taught and implemented with the aim to develop
different types of skills so that students are able to acquire following competency:
Develop production drawings and solid models using codes, norms, standards
and CAD software.
3.
COURSE OUTCOMES
The theory should be taught and practical should be carried out in such a manner that
students are able to acquire different learning out comes in cognitive, psychomotor
and affective domain to demonstrate following course outcomes.
i. Select configuration of CAD workstation.
ii. Select type of modeling technique for given part.
iii. Design, develop and model the given part using various CAD software likeCreo/Catia /Unigraphics/Solid edge/Inventor/ AutoCAD, etc.
iv. Prepare solid models & assembly of mechanical parts.
GTU/NITTTR/Bhopal/13-14
Gujarat State
Computer Aided Design
4.
Course code: 3341904
TEACHING AND EXAMINATION SCHEME
Teaching Scheme
(In Hours)
Total Credits
(L+T+P)
Examination Scheme
Theory Marks
Practical Marks
ESE
PA
ESE
PA
70
30
20*
30
Total
Marks
150
Legends: L -Lecture; T -Tutorial/Teacher Guided Student Activity; P -Practical; C - Credit; ESE-End
Semester Examination; PA -Progressive Assessment
* WITH EXTERNAL EXAMINER.
5.
COURSE DETAILS
Unit
Unit I
Major Learning
Outcomes (in cognitive
domain)
1a. Appreciate the need
of CAD and its
application.
Fundamentals
of CAD
[Link] Geometric
2D transformation.
Unit- II
CAD
Hardware
Unit III
Topics and Sub-topics
1.1 Computer graphics & its
terminology.
1.2 CAD definition, concept & need.
1.3 CAD process.
1.4 Functional areas of CAD.
1.5 Coordinate systems.
1.6 Geometric transformation-concept
and types.
1.7 2 dimensional (2D) geometric
transformation- translation, scaling,
rotation and mirror with numeric
examples.
2a. Describe functions of
CAD Workstation, its
types, and
configuration.
2b. Use input/output
CAD devices.
2.1 CAD Workstation-types, functions
and configuration.
2.2 Input and output devices (including
voice, gesture, 3 dimensional (3D)
printer, etc)-types, configuration and
applications.
[Link] types of solid
modeling.
3.1 Difference between 2D & 3D
models.
3.2 Geometric modeling concept,
types, features and applications.
3.3 Solid modeling methods like
Constructive Solid Geometry, Pure
primitives & Boundary
Representation
[Link]
characteristics of
features based CAD
packages.
3.4 Feature base modeling-concept,
illustrative examples.
Geometric
modeling
GTU/NITTTR/Bhopal/13-14
Gujarat State
Computer Aided Design
Unit
Unit IV
Course code: 3341904
Major Learning
Outcomes (in cognitive
domain)
Topics and Sub-topics
[Link] graphics
packages used for
modeling
3.5 Parametric & non parametric
modeling-concept, differences and
illustration.
4a. Use appropriate UCS
for the given
situation.
4.1 Introduction to AutoCAD-3D
features and 2D commands
overview.
4.2 3D primitives-types and defining
parameters.
4.3 User coordinate system (UCS) and
its options.
4.4 3D draw commands.
4.5 3D modify and editing commands.
4.6 3D viewing & views generation.
3D Modeling
using
AutoCAD
Unit V
3D
parametric
modeling
6.
4b. Prepare solid model
of industrial parts and
its assembly using
Auto CAD.
4c. Prepare simple
surface model using
AutoCAD.
5a Prepare solid model
of industrial parts and
its assembly using
parametric modeling
software.
4.7 Surface modeling commands.
5.1 Introduction to parametric modeling
software. (Any one from Creo,
Unigraphics, CATIA, Solid Edge,
Inventor etc).
5.2 Sketching interfacing overview.
5.3 3D working plane introductions.
5.4 3D modeling.
5.5 Assembly modeling.
5.6 Views generation.
SUGGESTED SPECIFICATION TABLE WITH HOURS & MARKS (THEORY)
Unit
Unit Title
Teaching
Hours
I
II
III
IV
V
Fundamentals of CAD
CAD Hardware
Geometric modeling
3D Modeling using
AutoCAD
3D parametric modelling
TOTAL
4
2
4
Distribution of Theory Marks
R
U
A
Total
Level
Level
Level
Mark
s
5
5
0
10
2
3
0
5
2
4
4
10
10
20
10
28
5
18
6
24
14
28
25
70
Legends: R = Remember; U = Understand; A = Apply and above levels (Blooms Revised taxonomy)
Note: This specification table shall be treated as a general guideline for students and
teachers. The actual distribution of marks in the question paper may vary slightly from
above table.
GTU/NITTTR/Bhopal/13-14
Gujarat State
Computer Aided Design
Course code: 3341904
General Notes:
a. If midsem test is part of continuous evaluation, unit numbers I, II, III and IV (Up
to point number 4.2 only) are to be considered.
b. Ask the questions from each topic as per marks weightage. Numerical questions
are to be asked only if it is specified. Optional questions must be asked from the
same topic.
c. For theory paper, examiner has to give options of Select and specify any one
software from Creo, Unigraphics, CATIA, Solid Edge, Inventor etc while
asking the questions from Unit V.
7. SUGGESTED LIST OF EXERCISES/PRACTICALS
The practical/exercises should be properly designed and implemented with an attempt
to develop different types of skills (outcomes in psychomotor and affective domain)
so that students are able to acquire the competencies/programme outcomes. Following
is the list of practical exercises for guidance.
Note: Here only outcomes in psychomotor domain are listed as practical/exercises.
However, if these practical/exercises are completed appropriately, they would also
lead to development of certain outcomes in affective domain which would in turn lead
to development of Course Outcomes related to affective domain. Thus over all
development of Programme Outcomes (as given in a common list at the beginning of
curriculum document for this programme) would be assured.
Faculty should refer to that common list and should ensure that students also acquire
outcomes in affective domain which are required for overall achievement of
Programme Outcomes/Course Outcomes.
S. No.
Unit
Number
ALL
IV
IV
Practical/Exercises
(Outcomes in Psychomotor Domain)
Preperatory Activity
Prepare a 2D drawing using AutoCAD and 2D
parametric sketcher environment.
3DSolid Modeling-I
Prepare 3D solid models using AutoCAD (Three
mechanical components).
3D Surface Model
Prepare simple surface model using AutoCAD (Two
mechanical components).
3D Solid Modeling-II:
Prepare 3D solid model using any one (from Creo,
Unigraphics, CATIA, Solid Edge, Inventor etc)
parametric software. (Three models that includes base
features, Extrude/Protrude/Revolve).
GTU/NITTTR/Bhopal/13-14
Hrs.
required
02
04
02
05
Gujarat State
Computer Aided Design
Course code: 3341904
3D Solid Modeling-III:
Prepare 3D solid models using any one (from Creo,
Unigraphics, CATIA, Solid Edge, Inventor etc)
parametric software. (Four models that includes
engineering features).
05
Mini Project And Presentation Using Any One (From CREO,
Unigraphics, CATIA, Solid Edge, Inventor) Parametric
Software.
a. Prepare solid models of dismantled parts of an
assembly (selected as student activity 1).
b. Assemble the parts.
c. Get orthographic production drawings of solid
models prepared at a above.
d. Get orthographic production drawings of assembly
model prepared at b above.
e. Prepare the bill of material (BOM) .
f. Present the project.
10
28
Total Hours
Notes:
a. It is compulsory to prepare log book of exercises. It is also required to get each
exercise recorded in logbook, checked and duly dated signed by teacher.
b. Term work report must not include any photocopy/ies, printed manual/pages,
litho, etc. It must be hand written / hand drawn by student only. Printouts of
actually modelled parts/assemblies are to be permitted.
c. Term work report content of each experience should include following.
i. Sketches of parts/assemblies.
ii. Steps followed with commands, its options with numeric values,
position of UCS (in case of AutoCAD), planes selected, etc.
iii. Printouts of modelled parts/assemblies.
d. Mini project and presentation topic/area has to be assigned to the student in the
beginning of the term by batch teacher. This may be assigned individually or in
the group of maximum 2 to 3 students.
e. For 80 marks ESE, students are to be assessed for competencies achieved.
They should be given following tasks:
i. Prepare solid models and assembly using AutoCAD and any one
software (Creo, Unigraphics, CATIA, Solid Edge, Inventor etc).
8.
SUGGESTED LIST OF STUDENT ACTIVITIES
Sr. Activity
No.
Bring Actual mechanical assembly from industry/real life/scrap shop/garage/etc.
1 (made up of at least 4 to 5 mechanical components), dismantle the same, measure
dimensions and sketch it to use the same for exercise no.6).
Visit design section of different industry and observe various hardware and
2
software, procedure, standards they are following for designing a product.
GTU/NITTTR/Bhopal/13-14
Gujarat State
Computer Aided Design
9.
Course code: 3341904
SPECIAL INSTRUCTIONAL STRATEGIES (If any)
Sr.
No.
1
Unit
Strategies
I & II
III
IV &
V
a. Explain various configurations for CAD workstation and
different peripherals.
b. Demonstrate various Input/output devices and its connections
and how to use it.
c. Demonstrate the procedure of loading the CAD software on a
computer system.
Bring actual industrial production drawings from nearby industry and
distribute them among group of students for self study and
interpretation. Ask students to practice these drawings using CAD
software.
a. Bring small real components/assemblies like nuts, bolts,
washers, cotter-knuckle joints, couplings, pulleys, shafts, gears,
tool post, tool holders, etc. in the class.
b. Demonstrate various features of such components.
c. Show the steps to create solid models and assemblies of such
parts/assembly using CAD softwares.
d. Take the students for industrial visit.
10. SUGGESTED LEARNING RESOURCES
A. List of Books:
Sr.
No.
1.
B.
Title of Books
Author
Publication
Sham Tickoo
2.
Creo 2.0 for designer and engineers
Designing with Creo Parametric 2.0
Dreamtech press
3.
Pro/Engineer wildfire 5.0 instructor
David S. Kelley
McGraw-hill
4.
Unigraphics for designer & engineers
Sham Tickoo
Dreamtech press
5.
AutoCAD for engineers and Designers
Sham Tickoo
Dreamtech press
6.
Machine design
[Link]
PHI
7.
Production drawing
[Link]
New age publication
8.
Alex kruleski
Cengage publication
9.
Fundamental of Geometric
dimensioning & tolerancing
CAD/CAM & Automation
Farzak haidaree
Nirali
10.
Machine drawing including AutoCAD
Ajeet singh
McGraw-hill
Dr. Michel J Rider SDC Publications
List of Major Equipment/ Instrument with Broad Specifications:
i.
ii.
iii.
CAD Workstations.
Laser printer-A3 size.
AutoCad.
GTU/NITTTR/Bhopal/13-14
Gujarat State
Computer Aided Design
Course code: 3341904
iv.
Latest educational network version of Creo, Unigraphics, CATIA,
Solid Edge, Inventor, software (Any one).
C. List of Software/Learning Websites:
i. [Link]
ii. [Link]
iii. [Link]
iv. [Link]
v. [Link]
vi. [Link]
vii. [Link]
11.
COURSE CURRICULUM DEVELOPMENT COMMITTEE
Faculty Members from Polytechnics:
Prof. K. H. Patel, Head of Mechanical Engineering, Dr.S.S.& S. Gandhi College of
Engineering and Technology, Surat.
Prof. A. A. Lohia, Lecturer in Mechanical Engineering, Government Polytechnic, Rajkot.
Prof. S. H. Sundrani, Lecturer in Mechanical Engineering, Government Polytechnic
Ahmedabad.
Prof. Hitesh J. Yadav, Lecturer in Mechanical Engineering, RCTI, Ahmedabad.
Prof. B.D. Parmar, Lecturer in Mechanical Engineering, Government Polytechnic, Porbandar.
Prof. J. B. Patel, Lecturer in Mechanical Engineering, Sir BPI, Bhavnagar.
Prof. Jignesh M. Patel, Lecturer in Mechanical Engineering, BSP Polytechnic, Kherva.
Coordinator and Faculty Members from NITTTR Bhopal
Prof. Sharad K. Pradhan, Head, Department of Mechanical Engineering
Dr. K.K. Jain, Professor and Dean, Department of Mechanical Engineering
GTU/NITTTR/Bhopal/13-14
Gujarat State
