SL/NO MSM Reference TASK DESCRIPTION AMM REFERENCE NO

1 28/11/00/000/000/040 fuel tank AMM 28-11-01, 5-1

2 62/21/00/000/000/470 special thrust bearing,Frequency adapter/sleeve AMM 62-21-00, 4-4
3 62/21/00/000/000/485 Assembly - MRH AMM 62-21-00, 4-2
4 62/30/00/000/000/140 Mast/Hub coupling AMM 62-21-00, 4-2
5 62/30/00/000/000/200 Main rotor Mast AMM 62-31-00, 4-1,
AMM 62-31-00, 4-3
AMM 62-33-00, 4-1
6 63/30/00/000/000/110 Suspension bars and cross bar AMM 63-21-00, 4-2
AMM 63-31-00, 6-7
AMM 63-32-00, 4-1
7 64/21/00/000/000/450 Tail rotor AMM 64-21-00, 4-2
8 65/11/00/000/000/120 Bearing AMM 65-11-00, 3-1
65/11/00/000/000/170 Front shaft Section AMM 65-11-00, 4-2
9 65/21/00/000/000/060 TGB AMM 65-21-00, 6-1
10 67/30/00/000/000/030 Main servocontrol AMM 67-31-00, 4-2
MTC 20-02-05-404

ONE TIME
 Last Complied Next Due
AMM REFERENCE NO TYPE OF LIMIT MARGIN Hours Date Hours Date Hours Left
AMM 28-11-01, 5-1 2 FH 8 FH
AMM 62-21-00, 4-4 2 FH 8 FH
AMM 62-21-00, 4-2 2 FH 8 FH
AMM 62-21-00, 4-2 2 FH 8 FH
AMM 62-31-00, 4-1,
AMM 62-31-00, 4-3 2 FH 8 FH
AMM 62-33-00, 4-1
AMM 63-21-00, 4-2
AMM 63-31-00, 6-7 2 FH 8FH
AMM 63-32-00, 4-1
AMM 64-21-00, 4-2 2 FH 8 FH
AMM 65-11-00, 3-1 2 FH 8 FH
AMM 65-11-00, 4-2 2 FH 8 FH
AMM 65-21-00, 6-1 2 FH 8 FH
AMM 67-31-00, 4-2
MTC 20-02-05-404 2 FH 8 FH

CHECK
Due
SL/NO MSM Reference Task Description AMM Reference No Type Of Limit Margin
1 62/21/00/000/000/145 spherical bearing AMM 05-40-00, 6-7 10 FH 0
2 62/21/00/000/000/185 Frequency adapter AMM 05-40-00, 6-7 10 FH 0
3 62/21/00/000/000/145 spherical bearing AMM 05-40-00, 6-7 10 FH 0
4 62/21/00/000/000/185 Frequency adapter AMM 05-40-00, 6-7 10 FH 0

ONE TIME CHECK

 Last Complied Next Due
Margin Hours Days Hours Days Hours left Days Left
0
0
0
0

CHECK
SL/NO MSM Reference Task Description AMM/EMM Reference No
1 62/11/00/000/000/065 Main rotor blade AMM 62-11-00, 6-1
2 05-10-02-200-801
3 Record total number of C1 and C2 cycles consumed 05-10-02-200-801
as counted by EECU in the engine log book
4 visually examine engine and engine floor for leakage
5 visually examine the engine attachments and fire refer helicopter manual
protections for signs of impact and deterioration
6 Record the values from the creep damage counter 05-15-00-200-801
in the engine log book.
7 record in the engine log book the accumulation 05-15-00-200-801
of flying hours
8 Manually check that the HP gas generator rotates freely
and visually check that the engine is in good condition
9 Manually check that the power turbine rotates freely
10 Inspection of the oil level in tank and top up if required refer helicopter manual
11 Make sure that there are no foreign objects ,examine
air intakes and exhaust [Link] the blanks.
12 Record the corrective maintenance operatiions
performed in the engine log book, if any.

ONE TIME
 Last Complied Next Due
AMM/EMM Reference No Type Of Limit Margin Hours Days Hours Days Hours left
AMM 62-11-00, 6-1 15 FH 1 FH
05-10-02-200-801 15 FH
05-10-02-200-801 15 FH

15 FH
refer helicopter manual 15 FH

05-15-00-200-801 15 FH

05-15-00-200-801 15 FH

15 FH

15 Fh
refer helicopter manual 15 FH
15 Fh

15 FH

TIME CHECK
t Due
Days Left
SL/NO MSM Reference Task Description AMM/EMM Reference No Type of limit
3 Engine health inspection Refer helicopter Manual
4 EASB 05A017 Check of tail boom/Fenestron frame as per para3.B.1 or 3.B.2 added
 Last Complied Next Due
Type of limit maintenance Limit Margin Hours Days Hours
25 FH 2.5 1123.1 1148.1
added 25 FH 1116.8 1141.8
SL/NO MSM Reference Task Description AMM/EMM Reference No
1 62/11/00/000/000/015 Main rotor blade AMM 62-11-00, 6-3
2 62/11/00/000/000/025 Main rotor blade AMM 62-11-00, 6-3
3 63/21/00/000/000/170 Free wheel assembly AMM 05-40-00, 6-7
4 53/00/00/000/000/015 Tail boom/Rear structure AMM 53-31-00, 6-1
connecting
5 62/11/00/000/000/115 Main rotor blade
6 63/21/00/000/000/140 MGB AMM 12-10-00, 3-1
7 65/21/00/000/000/100 TGB AMM 12-10-00, 3-1
8 carry out one time visual and crack check of MRB AMM-62-11-00, 6-3
9 carry out GVI of MRB stainless steel shielding for gap
10 carry out GVI of free wheel rotation as per
11 MGB AND TGB oil change

ELT AMM 25-66-20, 5-1

Air conditioning AMM 21-51-02, 2-1
Cargo sling cleaning CMM 25-50-97
AMM/EMM Reference No Type of limit maintenance Limit Margin work done Days Hours
AMM 62-11-00, 6-3 CHK 30 FH (PO) 0 26.46 56.46
AMM 62-11-00, 6-3 CHK 30 FH 3 FH 1106.5 1136.5
AMM 05-40-00, 6-7 CHK 30 FH 0
AMM 53-31-00, 6-1 30 FH(PO) 3 FH 26.46
26.46
30 FH (PO) 5 FH 26.46
AMM 12-10-00, 3-1 30 FH (PO) 3 FH 26.46
AMM 12-10-00, 3-1 30 FH (PO) 3 FH 26.46 56.46
AMM-62-11-00, 6-3 30 FH (PO) 26.46

ONE TIME CHECK

AMM 25-66-20, 5-1 one month 1/2/2018
AMM 21-51-02, 2-1 one month
CMM 25-50-97 one month 1/2/2018
Days

1/3/2018

1/3/2018
 MSM/ALS Reference Task Description AMM/EMM Reference No Type of limit
1 62/21/00/000/000/155 Starflex star AMM 62-21-00, 6-1 CHK
2 63/21/00/000/000/190 Epicyclic reduction gear- Electrical AMM 60-00-00, 6-2 CHK
cheap detector
3 63/21/00/000/000/210 MGB- electrical chip detector AMM 60-00-00, 6-2 CHK
4 65/21/00/000/000/110 TGB- electrical chip detector CHK
Starflex star check GVI AMM 05-40-00, 6-7 CHK

Task Description
Type of limit maintenance Limit Margin Hours Done Days
CHK 50 FH 10 FH 1106.5
CHK 50 FH 0 1106.5

CHK 50 FH 0 1106.5
CHK 50 FH 0
CHK 50 FH 10FH 1106.5
Hours Due
1156.5
1156.5

1156.5

1156.5
 MSM/ALS Reference Task Description AMM/EMM Reference No Type of limit
GVI check of center shaft
1 62/11/00/000/000/035 section sleeves AMM 65-11-00, 6-12 CHK
2 65/11/00/000/000/025

3 65/11/00/000/000/165
Type of limit maintenance Limit Margin Hours Days Hours

CHK 100 FH 10 FH 1106.5 1206.5

 Task description AMM reference Maintenance limit Hours Due
Engine Compressor Wash 50 FH 1106.5 1156.5
SL/NO MSM/ALS Reference Task Description AMM/EMM Reference No

EASB EC 130-05A017(Tail boom fenestron

frame) as per para 3.B.5 & 3.B.1
1 21/51/00/000/000/015 Freon air conditioning system AMM 21-51-02, 6-1
2 21/51/00/000/000/090 Elastic belt AMM 21-51-02, 6-2
3 24/00/00/000/000/000 Antivibrator AMM 18-30-00, 6-1
4 25/11/00/000/000/030
5 25/11/00/000/000/040 Belt and harness - Front seats CMM 25-20-80
6 25/21/00/000/000/070 Belt and harness - Rear seats CMM 25-20-80
7 52/11/00/000/000/030 Crew Door AMM 52-11-01, 6-1
8 52/12/00/000/000/010 Sliding Door AMM 52-12-01, 6-1
9 53/00/00/000/000/020 rear fuselage AMM 53-00-00, 6-2
10 53/21/00/000/000/000/ Pick-up web of canopy frame AMM 53-21-00, 6-1
11 56/11/00/000/000/010 Windows and windshield AMM 56-11-00, 6-1
12 62/11/00/000/000/100 Blade pin AMM 62-11-00, 3-3
13 62/21/00/000/000/230 Starflex ball joint AMM 62-21-00, 6-2
14 62/30/00/000/000/030 Swashplates AMM 62-32-00, 3-1
15 62/30/00/000/000/040 Scissors bushings and
attachment bolts AMM 62-33-00, 3-1
16 63/11/00/000/000/065 Flexible coupling AMM 63-11-00, 6-18
17 63/11/00/000/000/070 Hydraulic pump AMM 63-11-00, 6-2
AMM 63-11-00, 6-15
18 63/21/00/000/000/035 Spectrometric Oil Analysis AMM 60-00-00, 6-1
Program (SOAP)
19 63/30/00/000/000/020 Laminated pads AMM 63-31-00, 6-5
20 63/30/00/000/000/030 Suspension cross member AMM 63-31-00,6-6
21 64/10/00/000/000/000 Blade/Bearing AMM 64-21-00, 6-1
22 64/10/00/000/000/005 Blade - Air duct AMM 64-21-00, 6-2
23 64/10/00/000/000/020 Tail rotor blade assy AMM 64-21-00, 6-21
24 64/21/00/000/000/060 Fairing assy AMM 64-21-00, 6-4
25 64/21/00/000/000/070 Central plate AMM 64-21-00, 6-22
26 64/21/00/000/000/080 Control plate assy AMM 64-21-00, 6-23
27 64/21/00/000/000/090 Tail rotor hub assy AMM 64-21-00, 6-24
28 64/21/00/000/000/100 Outer bearing block AMM 64-21-00, 6-25
29 64/21/00/000/000/110 Inner bearing block AMM 64-21-00, 6-26
30 64/21/00/000/000/120 Torsion tie bar AMM 64-21-00, 6-10
31 64/21/00/000/000/130 Torsion tie bar-to-blade attach bolt AMM 64-21-00, 6-28
32 64/21/00/000/000/140 Torsion tie bar-to-rotor hub attach bolt AMM 64-21-00, 6-29
33 64/21/00/000/000/150 Upper chinese ring AMM 64-21-00, 6-30
34 64/21/00/000/000/160 Lower chinese ring AMM 64-21-00, 6-31
35 65/11/00/000/000/090 Bearing blocks no 1 and 2 to 5 AMM 65-11-00, 6-17
36 65/11/00/000/000/210 Flexible coupling AMM 65-11-00,6-14
37 65/21/00/000/000/070 Spectrometric Oil Analysis AMM 60-00-00, 6-1
Program (SOAP)
38 76/12/00/ 601/000/005 Twist grip assmbly AMM 76-12-04, 6-1
39 71/61/00/000/000/015 sand filter installation AMM 71-61-10, 5-1
40 62/11/00/000/000/115 Main rotor blade AMM 62-11-00, 6-1
41 Engine compressor wash EMM 71-01-03-610-801
Epicyclic reduction gear- Electrical
cheap detector AMM 60-00-00, 6-2
MGB- electrical chip detector AMM 60-00-00, 6-2
TGB- electrical chip detector AMM 60-00-00, 6-2
Blanking plate AMM 65-11-00, 6-21
Battery CMM 24-33-96
Belt & Harness strape AMM 25-20-00, 5-1
AMM 25-20-00, 6-1
APPAREO Camera AMM 25-10-40, 5-1
ELT AMM 25-66-20, 6-1
Emergency floating gear AMM 25-67-00, 5-2
Emergency floating gear CMM 25-69-11
cabin extinguisher AMM 26-21-00, 6-2
Navigation-by horizon - stand-by battery AMM 24-33-00, 5-2
Bearing AMM 65-11-00, 6-15

GVI Main rotor blade AMM 62-11-00, 6-3

GVI of Bearingof -Centre shaft
GVI of elasto metersleeves AMM 65-11-00, 6-15
section sleeves AMM 65-11-00, 6-12
AMM 62-32-00, 3-1
AMM/EMM Reference No Type of limit maintenance Limit Margin

as per para 3.B.5 & 3.B.1 added 150 FH 0

AMM 21-51-02, 6-1 150 FH/ 12 M 15 FH/36 D
AMM 21-51-02, 6-2 150 FH/ 12 M 15 FH/36 D
AMM 18-30-00, 6-1 150 FH/ 12 M 15 FH/36 D
150 FH/ 12 M 15 FH/36 D
CMM 25-20-80 150 FH/ 12 M 15 FH/36 D
CMM 25-20-80 150 FH/ 12 M 15 FH/36 D
AMM 52-11-01, 6-1 150 FH/ 12 M 15 FH/36 D
AMM 52-12-01, 6-1 150 FH/ 12 M 15 FH/36 D
AMM 53-00-00, 6-2 150 FH/ 12 M 15 FH/36 D
AMM 53-21-00, 6-1 150 FH/ 12 M 15 FH/36 D
AMM 56-11-00, 6-1 150 FH/ 12 M 15 FH/36 D
AMM 62-11-00, 3-3 150 FH/ 12 M 15 FH/36 D
AMM 62-21-00, 6-2 150 FH/ 12 M 15 FH/36 D
AMM 62-32-00, 3-1 150 FH/ 12 M 15 FH/36 D

AMM 62-33-00, 3-1 150 FH/12 M 15 FH/36 D

AMM 63-11-00, 6-18 150 FH/12 M 15 FH/36 D
AMM 63-11-00, 6-2
AMM 63-11-00, 6-15 150 FH/12 M 15 FH/36 D
AMM 60-00-00, 6-1 150 FH/12 M 15 FH/36 D

AMM 63-31-00, 6-5 150 FH/12 M 15 FH/ 36 D

AMM 63-31-00,6-6 150 FH/12 M 15 FH/ 36 D
AMM 64-21-00, 6-1 150 FH/12 M 15 FH/ 36 D
AMM 64-21-00, 6-2 150 FH/12 M 15 FH/ 36 D
AMM 64-21-00, 6-21 150 FH/12 M 15 FH/ 36 D
AMM 64-21-00, 6-4 150 FH/12 M 15 FH/ 36 D
AMM 64-21-00, 6-22 150 FH/12 M 15 FH/ 36 D
AMM 64-21-00, 6-23 150 FH/12 M 15 FH/ 36 D
AMM 64-21-00, 6-24 150 FH/12 M 15 FH/ 36 D
AMM 64-21-00, 6-25 150 FH/12 M 15 FH/ 36 D
AMM 64-21-00, 6-26 150 FH/12 M 15 FH/ 36 D
AMM 64-21-00, 6-10 150 FH/12 M 15 FH/ 36 D
AMM 64-21-00, 6-28 150 FH/12 M 15 FH/ 36 D
AMM 64-21-00, 6-29 150 FH/12 M 15 FH/ 36 D
AMM 64-21-00, 6-30 150 FH/12 M 15 FH/ 36 D
AMM 64-21-00, 6-31 150 FH/12 M 15 FH/ 36 D
AMM 65-11-00, 6-17 150 FH/12 M 15 FH/ 36 D
AMM 65-11-00,6-14 150 FH/12 M 15 FH/ 36 D
AMM 60-00-00, 6-1 150 FH/12 M 15 FH/ 36 D
150 FH/12 M 15 FH/ 36 D
AMM 76-12-04, 6-1 150 FH/12 M 15 FH/ 36 D
 AMM 71-61-10, 5-1 150 FH 15 FH
AMM 62-11-00, 6-1 150 FH 15 FH
EMM 71-01-03-610-801

AMM 60-00-00, 6-2 150 FH/12 M 15 FH/ 36 D

AMM 60-00-00, 6-2 150 FH/12 M 15 FH/ 36 D
AMM 60-00-00, 6-2 150 FH/12 M 15 FH/ 36 D
AMM 65-11-00, 6-21 150 FH/12 M 15 FH/ 36 D
CMM 24-33-96 12M 36D
AMM 25-20-00, 5-1 12M 36D
AMM 25-20-00, 6-1
AMM 25-10-40, 5-1 12M 36D
AMM 25-66-20, 6-1 12M 36D
AMM 25-67-00, 5-2 12M 36D
CMM 25-69-11 12M 36D
AMM 26-21-00, 6-2 12M 36D
AMM 24-33-00, 5-2 12M 36D
AMM 65-11-00, 6-15 12M 36D
150FH 15 FH
AMM 62-11-00, 6-3 CHK 150 FH 15 FH
AMM 65-11-00, 6-15 CHK 150 FH 15 FH
AMM 65-11-00, 6-12 CHK 150 FH 15 FH
AMM 62-32-00, 3-1 CHK 150FH/12M 15FH/36D
Hours Days Hours due Days Hours left Days Left

1071.2 1221.2 1
1106.5 1256.5
1106.5 1256.5
1106.5 1256.5
1106.5 1256.5
1106.5 1256.5
1106.5 1256.5
1106.5 1256.5
1106.5 1256.5
1106.5 1256.5
1106.5 1256.5
1106.5 1256.5
1106.5 1256.5
1106.5 1256.5
1106.5 1256.5
1106.5
1106.5 1256.5
1106.5 1256.5
1106.5 1256.5
1106.5 1256.5
1106.5 1256.5
1106.5
1106.5 1256.5
1106.5 1256.5
1106.5 1256.5
1106.5 1256.5
1106.5 1256.5
1106.5 1256.5
1106.5 1256.5
1106.5 1256.5
1106.5 1256.5
1106.5 1256.5
1106.5 1256.5
1106.5 1256.5
1106.5 1256.5
1106.5 1256.5
1106.5 1256.5
1106.5 1256.5
1106.5 1256.5
1106.5 1256.5
1106.5 1256.5
1106.5 1256.5
1106.5 1256.5
1106.5 1256.5
1106.5 1256.5
1106.5 1256.5
1106.5 1256.5
1106.5 1256.5
1106.5 1256.5
1106.5 1256.5
1106.5 1256.5
1106.5 1256.5
1106.5 1256.5
1106.5 1256.5
1106.5 1256.5
1106.5 1256.5
1106.5 1256.5
1106.5 1256.5
1106.5 1256.5
1106.5 1256.5
1106.5 1256.5
1106.5 1256.5
1106.5 803.26
1106.5 803.26
1106.5 803.26
1106.5 803.26
SL/NO MSM/ALS Reference Task Description AMM/EMM Reference No
1 62/30/00/000/000/120 GVI of Swashplates AMM 62-32-00, 6-2
Tactile check of ball joint -
2 62/30/00/000/000/130 Swashplates AMM 62-32-00, 6-1
3 62/11/00/000/000/115 Main rotor blade (PO) AMM 62-11-00, 6-1
4 Module 2-Axial -compressor - 72-00-32-200-801
Erosion check
AMM/EMM Reference No Type of limit maintenance Limit Margin Hours Days Hours
AMM 62-32-00, 6-2 300 FH 30 FH 1185.7 1485.7

AMM 62-32-00, 6-1 300 FH 30 FH 1185.7 1485.7

AMM 62-11-00, 6-1 300 FH 15 FH 898.1 1198.1
72-00-32-200-801 300 FH 30 FH 1180.8 1480.8
SL/NO Task Description AMM/EMM Reference No maintenance Limit Margin

1 800 HOURS INSPECTION 800 FH

AS PER APPROVED SCHEDULE 80 FH
Margin Hours Next Due

80 FH 854:47 [Link]
SL/NO Task Description AMM/EMM Reference No maintenance Limit
Checking the heating/demisting cock for
SB No. 130-05-023 comply with 600 FH/24 M
free rotation
para 3
Main rotor blade (PO) AMM 62-11-00, 6-1 450 FH

easb 05A014, WATER TIGHTNESS 660 fh/12 MNTHS

Check of the main rotor hub/mast EASB No. EC130-62A014 600 FH
attachment screws

600 FH inspections As per approved schedule 600 FH/24 M

 maintenance Limit Margin Hours Next Due

600 FH/24 M
554.51 1154.51
450 FH 15 FH 443.25 FH
752:10 FH/
660 fh/12 MNTHS 10/4/2017 10/4/2018

600 FH 870.2 FH 1470

600 FH/24 M 60 FH/ 73 D 653.26 1253.26

Task Description AMM reference Maintenance limit Margin
144 M (PO)** then
MGB and TGB assembly AMM 05-60-00, 6-1 every 72 M 180 D
MGB and TGB assembly AMM 05-60-00, 6-1 216 M 180 D
Detailed check of rotor mast lower
section AMM 62-31-00, 6-5 72 M 180 D
Di of MGB and TGB assembly AMM 62-31-00, 6-1 96 M (PO) 180 D
144 M
192 M
240 M
Detailed inspection of Skid type landing
gear AMM 32-11-00, 6-6 144 M 180days
Visual check of Cabin floor Amm 32-11-00, 6-6 144 M 180 days
Detailed inspection of fuel tank
compartment AMM 53-00-00, 6-5 144 M 180 days
Detailed inspection of Tail boom to
fuselage junction AMM 53-10-00, 6-3 144 M 180 days
Detailed inspection of Fenestron AMM 53-31-00, 6-8 144 M 180 days
Detailed inspection of MGB suspension
bar fittings AMM 53-41-00, 6-2 144 M 180 days
Detailed inspection of rotor flight control
channels AMM 63-32-00, 6-6 144 M 180 days
AMM 67-00-00,6-2
Detailed inspection of Engine support 67-00-00,6-4 144 M 180 days
Functional test Engine parameters AMM 71-41-00,6-1 144 M 180 days
Cleaning oil cooler AMM 77-00-00, 5-1 144 M 180 days
VI and DI Demisting or heating AMM 79-21-00, 3-1 144 M 180 days

AMM 21-21-02, 6-1 and

DI Bonding AMM 21-12-03,6-1 144 M 180 days
180 days
AMM 25-92-00, 6-3 144 M 180 days/100 OPH
DI of cargo sling AMM 25-92-00,6-4 60 M/1000 OPH
DI of Fuel tank AMM 25-92-00, 6-3 144 M 180 days
144 M 180 days

NOTE: ** inspection to be done after 140 M, every after 72 M since then

 month done Due

DATE - 24/Aug/2015

29 month till January

72 M since then
 Task Description AMM/EMM Reference No Maintenance limit Margin Days

Battery CMM 24-33-96 24 M 73 D

cleaning of battery AMM 24-33-00, 2-1 24 M 73D
compartment
days due
 Task Description AMM/EMM Reference No Margin Days
Battery CMM 24-33-96 36 days 12 months
AMM 25-20-00, 5-1 and AMM
GVI of belt and harness strap 25-20-00,6-1 36 days 12 months
APPAREO Camera AMM 25-10-40, 5-1 36 days 12 months
GVI of ELT AMM 25-66-20, 6-1 36 days 12 months

Cabin Fire Extinguisher p/n

S262A10T1001
FT of stand by horizon - stand by AMM 26-21-00, 6-2 36 days
batter AMM 24-33-00, 5-2 36 days 12 months
GVI and FT of cargo sling 12 months /
installation AMM 25-92-00, 6-1 100 OPH

12
Compliance with the EASB no MONTH/600
05A014 HRS
 Month done days due
12/9/2017 12/9/2018

12/9/2017 12/9/2018
12/9/2017 12/9/2018
12/9/2017 12/9/2018

29/6/2017 29/6/2018
12/9/2017 12/9/2018

12/9/2017 12/9/2018

10/4/2017 10/4/2018
 CARGO SLING 100 OPH UNDER LOAD

[Link]
operation
DATE performed OPH
12/2/2016 1:33 FH
13/2/2016 1:33 FH
15/2/2016 00:37 FH
16/2/2017 4:08 FH
20/2/2017 00:51 FH
18/4/2016 1:06 FH
19/5/2016 5 times 0:43 FH
21/5/2016 4:00 FH
22/5/2016 3:00 FH
23/5/2016 0:25 FH
4/6/2016 3:20 FH
5/6/2016 1:29 FH
7/6/2016 0:49 FH
8/6/2016 2:37 FH
12/6/2016 2:50 FH
13/6/2016 0:45 FH
7/7/2016 1:14 FH
8/7/2016 1:27 FH
9/7/2016 0:53 FH
15/7/2016 1:38 FH
16/7/2016 0:35 FH
18/7/2016 0:06 FH
31/7/2016 0:39 FH
2/8/2016 1:25 FH TOTAL=68:52FH
16/8/2016 2:54 FH
17/8/2016 0:23FH
11/2/2017 00:50 FH
15/2/2017 3:52 FH Maintenance of cargo sling need to be done at 5
22/4/2017 00:11 FH AMM 25-92-00, 3-3 and AMM
7/11/2017 23:00

Maintenace of cargo sling to be done at 100 OP

G 100 OPH UNDER LOAD

cargo sling need to be done at 500 and 60M/ 1000 OPH as per
AMM 25-92-00, 3-3 and AMM 25-92-00, 6-4

cargo sling to be done at 100 OPH as per AMM 25-92-00, 6-1

 Smart Gel Test

Work Done Due Date

20/1/2018 17/2/2018
 Cargo Net S/N: HCN-1983

Date OPH
12/6/2016 0:25 FH
8/7/2016 00:08 FH
9/7/2016 00:07 FH
31 JUL- 9 AUG 2:22 FH
29 Aug - 6 Sept 1:15 FH
7/11/2017 11:00
TOTAL FH=15:17 FH
HCN-1983
 CARGO NET S/N 1
DATE OPH
7/7/2016 00:32 FH
8/7/2016 00:15 FH
9/6/2016 00:14 FH
31 JUL-9 AUG 2:50 FH
29 Aug - 6 Sept 1:18 FH
7/11/2017 11:00
TOTAL FH=17:27FH
CARGO NET S/N 1982
 CARGO NET S/N
DATE OPH
8/7/2016 00:15 FH
9/7/2016 00:13 FH
31 JUL-9 AUG 2:30 FH
29 Aug - 6 Sept 1:20 FH
22/4/2017 00:11 FH
7/11/2017 11:00
TOTAL=15:44FH
CARGO NET S/N 1981
 Decfects observed and Rectification carried out

Defect Tech log reference

Defects observed page no.
date
oil leak observed from output seal of TDS/Engine 12/11/2015 8

Hyraulic filter of model 1 side found pop out 22/12/2015 31

landing light unserviceable 25/3/2016 94

Oil filter pre-clogging failure detected on VEMD 27/3/2016 95

landing light unserviceable 28/4/2016 129

landing light unserviceable 29/4/2016

rear nav light unserviceable 29/4/2016 131
pedal stiff notch now apparent- additional
pressure required on left pedal to overcome 30/6/2016 197
notch
sand filter unservisable 21/7/2016 213
GPS no map display 24/7/2016 215
rotor brake needs adjustment 27/7/2016 218
landing light unserviceable 29/7/2016 220
low fuel warning light/NOP unservisable 2/8/2016 223
GPS unit not working as used to: update card 3/8/2016 224
acceptance
Interference

oil leak observed from output seal of TDS/Engine

Clock/Chronometer U/S 17/9/2016 248

Hydraulic leak

fuel cap missing (lost)

15/10/2016 264

Hyraulic filter of (No. 1 hydraulic system LH side)

found pop out
2/1/2017
oil leak observed from output seal of TDS/Engine 11/1/2017 at
649:05 FH
327
v2 track defect 2/2/2017 at 6
ELT found faulty (Code 3+2) 2/3/2017
LH side hydraulic pump leakage

GOV light on high power(amber light) 2/3/2017

Appareo camera not functioning properly

Bleed valve not functioning properly 30/4/17 388

Leak from LH servo control 17/11/2017 494

A/C battery record low voltage 22/11/2017 499

served and Rectification carried out

Rectification Defect rectified date

magnetic seal replaced as per EMM 83-12-00-950-801- 12/11/2015

A01
Hydralic filter replaced with new one as per AMM 29- 22/12/2015 at 94:41 FH
00-00,3-6
Replacement of landing light Carried our as per AMM 2/4/2016 at 229:21 FH
33-43-00, 4-1
Engine oil filter replaced as per EMM 79-21-00-900- 27/3/2016 at 219:50 FH
801-A01
Replacement of landing light Carried our as per AMM 13/5/2016 at 319:40 FH
33-43-00, 4-1
rectification carried out as per AMM 33-43-00,1-1 1/5/2016 at 287:50 FH
rectification carried out 1/5/2016 at 287:50 FH
defect rectification carried out as per AMM 67-21-
00,4-2 (removed one washer from three availabel 30/6/2016 at 428:44 FH
ones)
connector 29K-P1 cleared and installed back 21/7/2016

Ground run carried out braking timing 23 sec. Found sat27/7/2016

Rectification carried out as per AMM 33-43-00, 4-1 8/8/2016 at 479:55 FH
Rectification carried out as per AMM 28-41-01, 4-1 12/8/2016 at 487:16 FH

magnetic seal replaced as per EMM 83-12-00-950-801-

A01 20/8/2016 at 514:44 FH
chronograph replaced as per AMM 31-21-00, 4-1 1/10/2016 at 532:38 FH
16/10/2016 at 554:41 FH(O
ring replacement)
Rectification carried out as per AMM 29-11-00, 4-1
(replacement of O ring of the pressure switch ) 28/10/2016 at 576:20
Replacement of pressure switch as per AMM 29-11-00, FH(pressure switch
4-1 replacement)

Installation of new fuel cap as per instruction written

on the fuel cap 18/10/2016 at 554:41 FH

hydraulic filter replacement (No.1 hydraulic system LH

side), P/N 806966 as per AMM 29-00-00, 3-6 5/1/2017 at 635:54 FH

found unpluged. Plugged and operational test carried

out. Found sat 2/2/2017 at 655:29 FH
Warrenty claim put up on 2/3/2017
leakage part coated with sealing compound (PRC CM
6056) and continuous monitoring is required. Leak still
persisting 21/3/2017

Rectified by cleaning the bleed valve filter as per EMM

75-31-00-200-802-A01 and even cleaned the bleed
valve electrical connectors 2/3/2017 at 738:01 FH
Connectors cleaned but the problem is still persisting.
SD found faulty, need replacement
Carried out replacement of bleed valve as per EMM
EMM 71-00-06-817-881-A01 3/5/2017 at 793:46 FH
Carried out replacement of servicable LH servo control
from the A5-BHS 17/11/2017 at 1053.9 FH

Carried out replacement of servicable battery A5-BHS 22/11/2017 at 1068.1 FH

 ENGINE
ITEM Components MP/N (PN) S/N
72-61-00-01-001 Module 01 assy- Accessory gearbox 70BM010020 19795
72-32-00-01-001 MODULE 012 ASSY- AXIAL COMPRESSSOR 70BM020010 20916
72-43-00-01-001 MODULE 03 ASSY- GAS GENERATOR 70BM030070 33129
72-54-00-01-001 MODULE 04 ASSY- POWER TURBIBE 70BM040020 33129
72-15-00-01-001 MODULE 05 ASSY- REDUCTION GEAR 70BM050010 22914
73-23-00-01-010 PUMP AND METERING UNIT ASSEMBLY 290862200 50900
MODULE 01 BEARING 9609000728 1009
9609000486 13103 AND 13126
MODULE 2 MODULE 2 BEARING
9609000727 976
MODULE 03 BEARING 9609000493 7242
MODULE 3
HP TURBINE BLADE 229226A2M0 28436

9609000166 29811
MODULE 4 MODULE 4 BEARING
9609000554 7045
POWER TURBINE BLADE 229281A440 33584
POWER TURBINE NUT 292810450 649

MODULE 5 MODULE 5 BEARING 9609000489 7558

9609000631 6923
9609000514 6724
9609000675 5329 AND 5337
9609000676 10583 AND 10510
SLEEVE ASSY 292717600 9181510HSP
SPLINED NUT 292710510 6923
 Type of limit(TBO) Reference counter
4000 FH/ 15 YEARS
4000 FH/ 15 YEARS
4000 FH/ 15 YEARS
4000 FH/ 15 YEARS
4000 FH/ 15 YEARS
10 YEAR
4000 FH/ 15 YEARS TSN
4000 FH
4000 FH TSN
4000 FH
10000 CYCLE / 261 CSN1 AND CYCLE

4000FH TSN
4000 FH TSN
10,000 CYCLE OR 6000 FH CSN1 OR TSN
4000 FH TSN

4000 FH TSN
4000 FH TSN
4000 FH TSN
4000 FH TSN
4000 FH TSN
4000 FH TSN
4000 FH TSN
s/n P/N S/N DATE OF FIRST CHARGE DUE FOR 6 MONTHS DUE FOR 12 MONTHS
Returned back to
1 151 CH1 C07115 26/3/2015 AHSA on warranty 26/3/2016
basis

2 151 CH1 D01477 24/06/2015 16/4/2016 16/10/2016,

Did on 24/1/2017 C/o on 25/9/2017 and

3 151 CH1 201601170 7/7/2016 and installed on A5- installed in A5-BHS on
BHt on 28/1/2017 28/9/2017

29/3/2017 and 29/09/2017, removed

4 151 CH1 D05839 1/2/2016 installed in A5-BHS on from A5-BHS on
16/4/2017 28/9/2017.

5 151CH1 201600136 Not servicable Not servicable

c/o first charge on

22/7/2017, due for 6
month test on
6 151CH1 201604189 new battery 22/1/2018 22/7/2018
DUE FOR OVERHAUL REMARKS

26/3/2017
u/s, sent to Singapore

Removed form A5-BHS

24/06/2017 on 16/4/2016 for
overhaul.

7/7/2018

1/2/2018 c/o 6 month check on

29/3/2017 and installed
in A5-BHS on 16/4/2017.
u/s, sent to singapore

received on warranty
claim in place of
201604189, Installed in
A5-BHT on 23/7/2017,
 AIRFRAME
ATA Chapter Components MP/N (PN)
62-11 Main rotor blade Main rotor blades 355A11-0030-04
starflex star 350A31-1918-00
spherical thrust bearing 704A33633208
lower sleeve flange 350A31-1850-02
Upper sleeve flange 350A31-1850-03
Main rotor shaft 350A37-1290-04
Blade horn 350A31-1877-03
spherical thrust bearing
bolt(screw) 350A31-1854-21

MRH attachment bolt 350A37-1244-20

62-21 Main rotor head Unequipped blade pin 350A31-1771-21

scissors drive adaptor
scissors link upper 350A37-1126-02
scissors link lower 350A37-1127-02
Non-rotating swash plate 350A37-1002-07
Rotating swashplate 350A37-1003-08
62-32 Swashplate Mast lower housing 350A37-1292-00
Assembly Mast upper housing 350A37-1291-00
63-11 MGB/Engine MGB-Engine link shaft 350A35-1109-20
coupling MGB-Engine link flange 350A35-1088-20
63-21 MGB Fixed ring gear 350A32-1119-20
Planet gear, unequipped
Planet gear cage 350A32-1089-21
Bevel wheel 350A32-3166-20

Input bevel pinion 350A32-3186-20

Main housing assembly 350A32-3156-02
MGB bottom housing 350A32-3119-05
Sun gear 350A32-1075-20
Free wheel shaft [Link].0
Free wheel flange [Link].0
63-30 MGB mount &
attachment MGB suspension cross bar
front bar 704A33-633-262
Rear bar 704A33-633-075
63-32 MGB Suspension Front attachment fitting 350A21-1104-03
bar Rear attachment fitting 350A21-1105-03
tail rotor hub assembly 350A33-3120-01

64-21 Tail rotor hub tail rotor blade assembly 350A33-3002-02

65-11 Tail rotor drive shafFront section assembly 350A34-0151-00
Centre shaft section tube
assembly 350A34-3020-00
Centre shaft section tube
assembly 350A34-3020-01
65-21 Tail gearbox Input flange 350A33-5102-20
Bevel wheel 350A33-5111-21
Bevel pinion 350A33-5118-21
Housing assembly 350A33-5140-01
67-30 Servocontrol Servocontrol main 704A44831102/ 704A
RFRAME
S/N Type of limit
43879, 43885, 43896 20000 FH
M3737 3000 FH
LK23032, LK23130, LK23093 4600 FH
M37564, M37567, M37571 5750 FH
M36828, M36918, M36919 5750 FH
FR2662 58000 TC
MAP11228, MAP10300, MAP 11041 20000 FH
68264, 68265, 68266, 68267, 68269,
68272 3000 FH
105782, 106018, 106033, 106492,
106492, 106980, 112169 3000 FH
M52809, M52611, M52620,M5266,
M52837, M52881 5000 FH
S4097 20000 FH
SD6439, SD6392 20000 FH
SD6136, SD6155 20000 FH
CUR02092 20000 FH
CUR01639 20000 FH
S4075 20000 FH
S4097 20000 FH
M4 201000TC
M12 121000TC
L9329 20000 FH
20000 FH
CUR02751 44600 TC
L4646 20000 FH
20000FH/
M237 215300 TC
MAP1303 76500 TC
MAP9626 63500 TC
L11087 20000 FH
6797 120000 TC
90000 TC

160000 TC
5985, 6056 20000 FH
12675, 12581 20000 FH
20000 FH
20000 FH
CUR00685 6900 FH

M8306, M8357, M8381, M8448,

M8456, M8479, M8508, M8514,
M8619, M1674 10000 FH
PPT01622 20000 FH

PPT00483 2300 FH

8400 FH
SP774 20000 FH
M718 20000 FH
M718 12400 FH
ML0916 20000 FH
3516, 3518/1982 20000 FH
 Airframe SUBJECT TO ON CONDITION

S/N Item Type of limit.

1 Air conditioning - Compressor OC

2 Battery OC
3 Belt and harness - Strap OC
4 Fuel pump OC
5 Stand-by battery OC
6 Spring-type vibration damper OC
7 MRH assy OC
8 MRH assy OC
9 MGB suspension cross bar OC
10 TRH OC
11 Tail rotor drive assembly OC
 ENGINE
ITEM Components MP/N (PN) S/N Type of limit(SLL)
MODULE 2 AXIAL COMPRESSOR 2292153370 2528FB 22,000 CYCLE

MODULE 3 CENTRIFUGAL IMPELLER 292206110 3713CAR 22,000 CYCLE

INJECTION WHEEL 2292260750 12213AD 8000 CYCL E
HP TURBINE DISC 2292260060 X730AD 17, 000 CYCLE
MODULE 4 POWER TURBINE DISC 2292260060 W071AD 17,000 CYCLE
Reference counter
CSN1

CSN1
CSN1
CSN1
CSN1
 Bearpaw (P/N D130-700-011)inspection every 300 hrs and daily inspection

Task description S/N Reference Maintenance limit

As per Dart Aerospace bear paw manual

Bearpaw inspection B155294 part ICA-D130-700 Rev 2 0f 05-00-00 30 FH
subpart 5.2

As per Dart Aerospace bear paw manual

Bearpaw inspection B154845 part ICA-D130-700 Rev 2 0f 05-00-00 30 FH
subpart 5.2

Daily check to be carried out when in service as per Dart Aerospace bear paw manual part ICA-D130-700 Rev 2 of
subpart 5.1 ***Particular attention to be paid to the condition of the MS21042L4 nuts

Bearpaw S/N Bearpaw S/N

B155294(A5-BHT) B154845(A5-BHS)
Date Hours Date Hours
8/3/2017 4:02 7/3/2017 4:50
13/3/2017 0:28 8/3/2017 4:59
17/3/2017 2:16 9/3/2017 4:13
19/3/2017 2.13
20/3/2017 3.06
21/3/2017 1.49
s and daily inspection

Maintenance limit Hours Due

30 FH 300

30 FH 300

l part ICA-D130-700 Rev 2 of 05-00-00

uts
 Heli-Utility basket (P/N D130-701-043 & S/N B157080) inspection every 600 hrs am
inspection

Daily checks to be carried out when in service as per the Dart Aerospace limited heil utility basket manual part ICA-D130-701
***Particular attention to be paid to the condition of the MS21042 nuts

Task Description Reference Maintenance limit

As per the Dart Aerospace limited heil utility basket

Heli utility basket 60
manual part ICA-D130-701 subpart 5.2

Heli utility basket flying hours

Aircraft on which it is
Date Hours installed
ection every 600 hrs amd daily

y basket manual part ICA-D130-701 subpart 5.1

MS21042 nuts

Hours Due

600
 Components replacement record
S/N Description Removed P/N Removed S/N Installed P/N Installed S/N

1 Fuel gauge probe 746535-1- 746535IN00321 746535-1- 746535IN00237

0/704A37651105 0/704A37651105
350A53413801
2 Air intake duct 350A53413801 NA NA
(post mod )

3 Bleed valve 9550178980 1554 9550178980 1562

4 Starter generator 150SG122Q-4 S00757 150SG122Q-4 S01023

LH servo control
5 with hose 704A44831102 3516 704A44831102 3613
 Carried out Component
(Hour & date) hours
487:16 FH on
12/8/2016
679:44 FH on
26/2/2017
793:46 FH on
3/5/2017

680.1 FH on new starter

31/10/2017 generator

TBO for
Installed from Servo
1053.9 FH on A5-BHS at control is
17/11/2017 688.9 FH 3000 FH