Scribd
Upload
517 views2 pages

4 Training Plan Epas1

The document outlines a training plan for assembling and servicing electronic products at AMKOR Technology Philippines Inc. It details three competencies: assembling electronic products, servicing consumer electronic products and systems, and servicing industrial electronic modules, products, and systems. For each competency, it lists the training activities, mode of training as internship, assessment details, facilities and tools needed, and dates for January 2018 and 2016 from 8am to 5pm. The OJT coordinator is identified as Mr. Noel T. Hipolito.

Uploaded by

JoseMariano Arnal
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
517 views2 pages

4 Training Plan Epas1

The document outlines a training plan for assembling and servicing electronic products at AMKOR Technology Philippines Inc. It details three competencies: assembling electronic products, servicing consumer electronic products and systems, and servicing industrial electronic modules, products, and systems. For each competency, it lists the training activities, mode of training as internship, assessment details, facilities and tools needed, and dates for January 2018 and 2016 from 8am to 5pm. The OJT coordinator is identified as Mr. Noel T. Hipolito.

Uploaded by

JoseMariano Arnal
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
  • Training Plan for Electronic Products Assembly and Servicing NC II: Provides a detailed outline of the training plan focusing on electronic products assembly including qualifications, competencies, tasks, facilities, and assessment arrangements.
  • Training Plan for Industrial Electronic Systems: Describes the structured training plan for industrial electronic systems covering training activities, facilities required, and assessment schedules.

TRAINING PLAN

QUALIFICATION : ELECTRONIC PRODUCTS ASSEMBLY AND SERVICING NC II


COMPETENCY : ASSEMBLE ELECTRONIC PRODUCT
OJT VENUE : AMKOR TECHNOLOGY PHILIPPINES INC.

TRAINEES ASSESSMENT
TRAINING MODE OF FACILITIES/ DATE AND
TRAINING STAFF VENUE ARRANGEMEN
ACTIVITY/TASK TRAINING TOOLS AND EQUIPMENT TIME
REQUIREMENT T

Assemble 1. Prepare to assemble Internship OJT Coordinator  Long-nosed pliers AMKOR Performance January
Electronic electronics products Mr. Noel T.  Diagonal cutters Tech Evaluation 3,2018
Products 2. Prepare/ Make PCB Hipolito  Standard screwdrivers Philippines through 8:00-5:00
modules  Soldering iron, 30w Inc. Direct
3. Mount and solder  Desoldering iron, 30w Observation
electronic  Screw driver assorted,
components Phillips, slotted
4. Assemble electronic  Wrenches assorted
products
 Allen wrench/key
5. Test and inspect
 Utility knife/stripper
assembled electronic
products  Pliers assorted, long nose,
side cutter

Service 1. Prepare unit, tools Internship OJT Coordinator  Long-nosed pliers AMKOR Performance January
consumer and workplace for Mr. Noel T.  Diagonal cutters Tech Evaluation 4,2016
electronic installation and Hipolito  Standard screwdrivers Philippines through 8:00-5:00
products and service  Soldering iron, 30w Inc Direct
systems 2. Install consumer  Desoldering iron, 30w Observation
electronic products  Screw driver assorted,
and systems Phillips, slotted
3. Diagnose faults and  Wrenches assorted
TRAINEES ASSESSMENT
TRAINING MODE OF FACILITIES/ DATE AND
TRAINING STAFF VENUE ARRANGEMEN
ACTIVITY/TASK TRAINING TOOLS AND EQUIPMENT TIME
REQUIREMENT T
defects consumer  Allen wrench/key
electronic products  Utility knife/stripper
and systems  Pliers assorted, long nose,
4. Maintain/Repair side cutter
consumer electronic
products
5. Re-assemble and test
repaired consumer
electronic products

Service 1. Prepare unit, tools Internship OJT Coordinator  Long-nosed pliers AMKOR Performance January
industrial and workplace for Mr. Noel T.  Diagonal cutters Tech Evaluation 5,2016
electronic installation and Hipolito  Standard screwdrivers Philippines through 8:00-5:00
modules, service  Soldering iron, 30w Inc Direct
products and 2. Install industrial  Desoldering iron, 30w Observation
systems electronic  Screw driver assorted,
modules/products/sys Phillips, slotted
tems  Wrenches assorted
3. Diagnose faults and
 Allen wrench/key
defects of industrial
 Utility knife/stripper
electronic
modules/systems/pro  Pliers assorted, long nose,
ducts side cutter
4. Maintain/Repair  Multimeter
industrial electronic  Oscilloscope
products  Function generator
5. Re-assemble and test  TV pattern generator
repaired industrial  High voltage probe
electronics products
 High grade magnifying
 glass with lamp

TRAINING PLAN QUALIFICATION : ELECTRONIC PRODUCTS ASSEMBLY AND SERVICING NC II COMPETENCY : ASSEMBLE ELEC
TRAINEES TRAINING REQUIREMENT TRAINING ACTIVITY/TASK MODE OF TRAINING STAFF FACILITIES/ TOOLS AND EQUIPMENT

You might also like