Data sheet

Accessories for pluggable interface relays CR-M

Sockets

Characteristics
–– Logical and standard socket for interface relays CR-M
–– Snap-on mounting on DIN rail
–– Connector for pluggable function modules: reverse polarity
protection/free wheeling diode, LED indication, RC element,
overvoltage protection

2CDC 291 009 S0011

Approvals
H UL 508, CAN/CSA C22.2 No.14
F CAN/CSA C22.2 No.14

R EAC

L RMRS

Marks
a CE

Order data
Packing unit = 10 pieces

Type Version Connection Order code

Logical sockets
Position of connecting terminals: coil connection (A1-A2), all contact connections (common contacts, n/o and n/c contacts)
on upper socket side. Details see connection diagrams.
CR-M2LS for 2 c/o (SPDT) contacts screw 1SVR 405 651 R1100
CR-M3LS for 3 c/o (SPDT) contacts screw 1SVR 405 651 R2100
CR-M4LS for 2 or 4 c/o (SPDT) contacts screw 1SVR 405 651 R3100
CR-M2LC for 2 c/o (SPDT) contacts spring 1SVR 405 651 R1200
CR-M4LC for 2 or 4 c/o (SPDT) contacts spring 1SVR 405 651 R3200

Standard sockets
Position of connecting terminals: coil connection (A1-A2) on lower socket side, contact connections (n/o and n/c contacts)
on the lower and upper socket side.
CR-M2SS for 2 c/o (SPDT) contacts screw 1SVR 405 651 R1000
CR-M3SS for 3 c/o (SPDT) contacts screw 1SVR 405 651 R2000
CR-M4SS for 2 or 4 c/o (SPDT) contacts screw 1SVR 405 651 R3000
CR-M2SF for 2 c/o (SPDT) contacts fork type screw 1SVR 405 651 R1300
CR-M4SF for 2 or 4 c/o (SPDT) contacts fork type screw 1SVR 405 651 R3300

Accessories for CR-M sockets

CR-MH Plastic holder 1SVR 405 659 R1000
CR-MH1 Metall holder 1SVR 405 659 R1100
CR-MJ Jumper bar for sockets with screw clamps 1SVR 405 658 R6000
CR-MM Marker 1SVR 405 658 R1000
 Electrical connection

41 11 31 21 11 41 31 21 11

44 14 34 24 14 44 34 24 14

42 12 32 22 12 42 32 22 12

41 11 31 21 11 41 31 21 11

42 44 12 14 32 34 22 24 12 14 42 4432 34 22 2412 14
2CDC 292 075 F0004

2CDC 292 074 F0004

2CDC 292 073 F0004

A2 A1 A2 A1 A2 A1

A2 A2 A1 A2 A2 A1 A2 A2 A1

CR-M2LS CR-M3LS CR-M4LS

41 11 41 31 21 11

44 14 44 34 24 14

42 12 42 32 22 12

41 11 41 31 21 11

42 44 12 14 42 4432 34 22 2412 14
2CDC 292 009 F0004

2CDC 292 008 F0004

A2 A1 A2 A1

A2 A1 A2 A1

CR-M2LC CR-M4LC

44 14 34 24 14 44 34 24 14

42 12 32 22 12 42 32 22 12

41 11 31 21 11 41 31 21 11

42 44 12 14 32 34 22 24 12 14 42 4432 34 22 2412 14

A2 A1 A2 A1 A2 A1
2CDC 292 070 F0004

2CDC 292 069 F0004

2CDC 292 068 F0004

A2 A1 A2 A1 A2 A1

41 11 31 21 11 41 31 21 11

CR-M2SS, CR-M3SS CR-M4SS,

CR-M2SF CR-M4SF

A1-A2 Supply voltage A1-A2 Supply voltage A1-A2 Supply voltage

11-12/14, Relay outputs 11-12/14, Relay outputs 11-12/14, Relay outputs
41-42/44 21-22/24, 21-22/24
31-32/34 31-32/34
41-42/44

2 - Accessories for pluggable interface relays CR-M | Data sheet

Mounting and removal of sockets

2CDC 292 061 F0004

2CDC 292 062 F0004

Mounting Removal

Technical data

Output circuits
Type CR-MxLS CR-MxSS CR-MxSF CR-MxLC
Output circuits 11-12/14, 21-22/24, ...
Number of poles 2, 3 or 4 2 or 4
Rated voltage 250 V AC 300 V AC
Rated current 7A 10 A

General data
Dimensions without holder and module (L x W x H) 75 x 27.2 x 60.8 mm 75.2 x 27.2 x 42.6 mm 66.7 x 30.3 x 29 mm 95 x 31 x 42.5 mm
(2.952 x 1.071 x 2.394 in) (2.961 x 1.071 x 1.677 in) (2.626 x 1.193 x 1.142 in) (3.74 x 1.22 x 1.67 in)
Degree of protection terminals IP 20 B (EN 60529)
Temperature range operation -40...+70 °C -25...+85 °C
storage -40...+70 °C
Connection type screw connection fork type screw spring connection
Maximum number of wires per connecting terminal 2 2 (one per
connection point)
Connecting capacity rigid 2 x 0.5-1.5 mm2
2 x 0.5-2.5 mm2 (2 x 20-14 AWG)
fine-strand (2 x 20-16 AWG)
with wire end ferrule 2 x 0.5-1.5 mm2 (2 x 20-16 AWG) 2 x 1.5 mm2
(2 x 16 AWG)
Stripping length 7 mm (0.28 in) 10 mm (0.39 in)
Tightening torque 0.6 Nm (5.31 [Link])
Minimum clamping force with 0.2 mm2 - - - 10 N
for fine-strand wire with 1.5 mm2 - - - 40 N
with wire end ferrule - - - > 40 N
Mounting DIN rail (IEC/EN 60715)
Material socket PA 6+GF - V2
contacts CuZn33
contact surface 5 µ Ni 6 µ Ni 5 µ tinned
terminals 8 µ Ni CCSC
combi screw M3 8.8 Steel, 5µ Ni -

Isolation data
Insulation voltage > 3 kV > 4 kV
Isolation between coil and contacts IEC/EN 61984
Clearance and creepage distance IEC/EN 61984

Standards / Directives
Standards IEC/EN 61984
Low Voltage Directive 2014/35/EU
RoHS Directive 2011/65/EU

Data sheet | Accessories for pluggable interface relays CR-M - 3

 Dimensions
in mm
60,8
27,2 Marker 42,6
27,2 27,2 24

Relay

35,4
Holder

2CDC 292 003 F0111

75

CR-M2LS CR-M3LS CR-M4LS 29,1 Pluggable

function module

CR-MxLS

42,5
33,2
31
24
12,4

12,4
15

95

2CDC 292 006 F0005

5,5

27 26

79,5

CR-MxLC

29 max
30,3
19
2CDC 292 005 F0011
66,7
35,4

CR-MxSF

Marker
27,2 42,6
27,2 27,2 24

Relay
75,2

35,4

Holder
2CDC 292 004 F0211

Pluggable
function module

CR-MxSS

4 - Accessories for pluggable interface relays CR-M | Data sheet

Pinning
13.35 6.675 6.675 4.45 4.45 4.45

4.1

4.1

4.1
2CDC 292 084 F0004

2CDC 292 085 F0004

2CDC 292 086 F0004

6.3

6.3

6.3
6.4

6.4

6.4
CR-M2xS CR-M3xS CR-M4xS

Further documentation

Document title Document type Document number

Electronic Products and Relays Technical catalogue 2CDC 110 004 C02xx
Relays CR-M Data sheet 2CDC 117 002 D020x

Jumper bar CR-MJ Data sheet 2CDC 117 015 D020x

Pluggable function modules CR-P/M Data sheet 2CDC 117 007 D020x

You can find the documentation on the internet at [Link]/lowvoltage

-> Automation, control and protection -> Electronic relays and controls
-> Interface relays and optocouplers.

CAD system files

You can find the CAD files for CAD systems at [Link]
-> Low Voltage Products & Systems -> Control Products -> Electronic Relays and Controls.

Data sheet | Accessories for pluggable interface relays CR-M - 5

Contact us

ABB STOTZ-KONTAKT GmbH

Document number 2CDC 117 005 D0204 (10/2016)

P. O. Box 10 16 80
69006 Heidelberg, Germany
Phone: +49 (0) 6221 7 01-0
Fax: +49 (0) 6221 7 01-13 25
E-mail: [Link]@[Link]

You can find the address of your

local sales organization on the
ABB home page
[Link]
-> Low Voltage Products and Systems

Note:
We reserve the right to make technical changes
or modify the contents of this document without
prior notice. With regard to purchase orders, the
agreed particulars shall prevail. ABB AG does
not accept any responsibility whatsoever for
potential errors or possible lack of information in
this document.

We reserve all rights in this document and in

the subject matter and illustrations contained
therein. Any reproduction, disclosure to third
parties or utilization of its contents – in whole
or in parts – is forbidden without prior written
consent of ABB AG.

Copyright© 2016 ABB

All rights reserved