Illinois Gaming WMS Bluebird 2 Configuration Tree - SCI-Games/WMS Hard Meter Config
OS version SSG-000-16CJ
Settings MUST be done before communication with Sci-Games has been established, otherwise "Call Attendant" error will be displayed during the setup process. Ram Clear will be required!
ALL SETTINGS NOT MENTIONED, NEED NOT REQUIRE ANY SETTINGS CHANGED
DOUBLE CHECK ALL SETTINGS BEFORE SELECTING SET/SAVE. OTHERWISE, IF ENTERED WRONG, RAM CLEAR WILL BE REQUIRED!!
SETUP
Clock Setup *Change Time Zone Change to desired time zone (America/Chicago)
Set
Set Date & Time Change date and time by selecting individual fields
Set
Machine Setup
Machine Info Setup Enter Serial Number Set Serial
numbers must be entered to continue proper procedure!!
Enter Asset Number Set Asset
Exit
Cabinet Setup
Device Setup Set Printer Type = Netplex
Set Validator Type = MARS Billval or JCM Billval bill acceptor should cycle after proper setting
Button Panel = USB OLED Button Panel (already set)
Save and Exit enter back in Device Setup to Print Void Voucher then exit
Credit Setup
Base Denom Set $0.01
Jackpot Limit Set to $501.00
Upper Jackpot Set to $501.00
Set
Cash Out and Promotional Options Cash Out Features Logo Cash Out Window = Disabled
Save
Split Pay = Disabled
Hand Pay Validation = Enable
Hand Pay Receipt = Enable
Restricted Promotional Credits = Enable
Print Restricted Promotional Credits = Enable
Non Restricted Promotional Credits = Enable
Credits Remain On Machine During Disable From SAS = Disabled
Jackpot Calibration Mode (GRIPS ONLY) = Disabled
Save
Denom Configuration Preconfigured denom set after communication established with Sci-Games
Exit
* MAKE SURE TO SET TIME ZONE FIRST, MONTH AND DATE SECOND, THEN SET HOUR LAST. OTHERWISE, THE HOUR WILL CHANGE AFTER DATE AND OR TIME ZONE ARE SET
Betson Midwest / WMS Gaming Page 1
Illinois Gaming WMS Bluebird 2 Configuration Tree - SCI-Games/WMS Hard Meter Config
Comm Setup
Serial Ports Host Comm 1 = SAS Primary
**CONFIG>>> Address = SAS Address Number
Validation = Enhanced
Remote Handpay Reset = Enabled
Jackpot Reset to Credits = Enabled
Resend Handpay Pending = Enabled
Send Reel Stops = Enabled (already set)
Save
Set Save Settings = YES Host Setup button will highlight after settings have been saved
Host Setup AFT = SAS Primary
Legacy Bonusing = OFF (already set)
Machine Control = SAS Primary
SSG Meter Collection = Disabled
Voucher In/Coupon In = Disabled (already set)
Voucher Out = SAS Primary
Save
Exit
WAT Setup In-House Tansfer = Enable
Debit transfer = Disable SCI-Games/WMS Meter Config
Partial Trannsfer = Enable SCI-Games WMS
Bonus Coin Out Win Transfer = Enable
Bonus Jackpot Win Transfer = Enable Credits Played Coin in (#1)
Promo Transfer = Enable
Transfer To GM = Enable Credits Won Coins Out (#2)
Transfer From GM = Enable
Card Eject From GM = Disable Credits In Bill In (1N $) (#4)
GM Cash In Control = Enable
CashOut To Host - Control = Soft Enabled - No Host Attempt Credits Out #6
Save Save Before Exiting = YES
* Coin Drop (#3) & Jackpot (#5) NOT USED
Sound Setup
Set desired volume
Save and Exit
**AFTER THE HOST COMM 1 FIELD HAS BEEN CHANGED TO SAS PRIMARY, THE WORD CONFIG WILL BE DISPLAYED IN A BLACK BOX TO THE RIGHT, ALLOWING TO CONTINUE ON WITH THE SETUP PROCESS
Betson Midwest / WMS Gaming Page 2
