NAME OF WORK : Widening & improvement of Kadi/Thol Sanand road CH 3/00 to 24/150 (4 laning) Ta Kadi, Dist: Mehsana (Construction

of Major bridge on Narmada Main

canal ,Saurashtra Branch canal and other Branch canal).

SCHEDULE FOR TESTING OF MATERIALS

For ensuring quality control and workmanship, various tests prescribed below for materials shall be taken at periodical intervals as stipulated below.
The materials shall be a got tested at Government Laboratory (R & B) or field Laboratory of GERI (R & B) for which 1% of the estimated amount put to Tender shall be
recovered from the contractor from the R.A. bills and final bills at the testing charges shall be paid to the GERI by the Government. However if the crarges increase over 1% no
excess recovery shall be made form the contractor as per resolution of B & C Department dated 10th, May 1985 vide TNC/1085 (4) s.
Item No. as per Brief Description Qty. of Prescription of test which shall Frequency @ which test shall be carried out Total Nos of test to be
Schedule 'B' Materials to be Tested Materials be carried out taken
1 2 3 4 5 6
Rubble *Gradation test 1 to 100 - cum. 1 test
17319.80 *Impact Value 100 to 500 - cum. 3 test
26
Cum *Flakiness Index of 500 to 1500 - cum. 5 test
1500 to 5000 - cum. 7 test
Kapchi *Gradation test 1 to 100 - cum. 1 test
19508.00 *Impact Value 100 to 500 - cum. 3 test
28
Cum *Flakiness Index of 500 to 1500 - cum. 5 test
1500 to 5000 - cum. 7 test
Grit *Stripping Value One test per work 1
stone dust *[Link] One test per work 1
Supplying of Quarry spall *Silt Content One test per work 1
Sand *Gradation One test per work 1
Asphalt 445.840 *Penetration Test Tanker test in Geri Lab. Only
M.T. as per I.S. 1203 Up to 10 1
11 to 20 2
20 to 50 3
Above 50 one per Tanker
11
Ductility Test As per I.S. 1208
Specification Gravity test As per I.S. 1202
Softening point test As per I.S. 1204
Viscocity test As per I.S. 1206
Quality of binder test 3 test per 2 tankers on plant site.
Cement 8034.180 *Consistency 1 test @ 50.0 M.T. 100 T 2 tests,
M.T. *Setting time 200 T 3 tests, 300 T 4 tests, 500 T 5 tests, 8
*Compressive Strength. 800 T 6 tests, 1300 T 7 tests & 8 testd for large consingment.
Steel *Tensile, (TMT) As per Manual of Quality Control
TMT
Yield 1 test/40 tonnes / per category
42
 Item No. as per Brief Description Qty. of Prescription of test which shall Frequency @ which test shall be carried out Total Nos of test to be
Schedule 'B' Materials to be Tested Materials be carried out taken
42
*Elongation
1646.63
Size
HT Strands Yield 1 test/40 tonnes / per category
*Elongation 1
14.00
Size
[Link] Test *Compressive Strength. 1 to 5 cmt - 1 No
6 to 15 cmt - 2 No
M150 1085.00 16 to 20 cmt - 3 No 25
M200 3814.00 20 to 50 cmt - 4 No 80
M250 59.00 51 to above - 4 +1 additional sample for each 50 [Link]. Or part 5
M300 6619.00 there of. 136
M350 6654.00 137
M400 182.00 7
M450 629.00 16
M500 466.00 13

The contractor shall have to pay 1% of the estimate cost put to tender towards all testing of materials & the same shall be duducted from their bills for the work. The testing of various
materials
Testing shall be
charges ofcarried outbe
GERI shall in GERI
born and resultNo
by Govt. received
refund shall be binding
be made to all
not extra i.e. the
charges contractor
over 1% shalland Government.
be recoverable from the contractor.

Signature of Contractor Deputy Executive Engineer Executive Engineer

R & B Sub Division R & B Division
Kadi Mehsana