AGUSAN NATIONAL HIGH SCHOOL
BUTUAN CITY
TECHNOLOGY AND LIVELIHOOD EDUCATION (HOME ECONOMICS)
Area: Dressmaking Grade 9 & 10
First Quarter
SUMMATIVE TEST
Name: __________________________________________ Section: ____________________
Teacher: ________________________________________ Date: ______________________
Direction: Direction: Read each item carefully and choose the letter of the best answer from the choices.
1. It is a flexible measuring tool used to take body measurements.
a. Ruler c. L-square
b. Tape measure d. French curve
2. It is a tool used for drafting sleeve and armhole pattern.
a. Hip curve c. French curve
b. L-square d. Hem gauge
3. It is a dressmaker’s guide in cutting fabric pieces in accordance with the garment design.
a. Design c. Manuscript
b. Dressmaker scale d. Pattern
4. What unit of measurement is used in taking body measurement?
a. Meter c. Inches
b. Kilogram d. Centimeter
5. This measurement is taken from the left of the figure to the right.
a. Horizontal measurement c. Circumferential measurement
b. Vertical Measurement d. Diagonal measurement
6. This measurement is taken around the body.
a. Horizontal measurement c. Circumferential measurement
b. Vertical Measurement d. Diagonal measurement
7. This measurement is taken from the top of the body figure to its base.
a. Horizontal measurement c. Circumferential measurement
b. Vertical Measurement d. Diagonal measurement
8. It measure from the tip of the left shoulder to the tip of right shoulder with the tape
measure passing over the prominent bone.
a. Chest width c. bust distance
b. Shoulder width d. bust height
9. It measure around the smallest portion of the torso.
a. Waist circumference c. hip circumference
b. Thigh circumference d. armhole circumference
10. It measure from the tip of the shoulder to the desired length of the sleeve.
a. Front figure length c. Sleeve length
b. Back figure length d. Length
11. This measurement is taken in two ways. For male insert a ruler on the rise and measure
from the waistline to the upper edge of the ruler and for the female allow her to sit on a
flat chair and measure at the side from the waistline to the surface of the chair.
a. Shorts length c. Crotch
b. Hip Circumference d. Thigh
12. This measurement is taken 5 inches below the waistline measure around the hip level.
a. Shorts length c. Blouse length
b. Hip1 Circumference d. Hip2 circumference
13. This measurement is taken from the waistline down to the desired length of the shorts.
a. Shorts length c. Blouse length
b. Hip1 Circumference d. Hip2 circumference
14. How many centimeters in 1 inch?
a. 2.54 centimeter c. 2.56 centimeter
b. 2.55 centimeter d. 2.57 centimeter
15. What is the computed measurement of 17 inches of shoulder width divided into ½ of
measurement needed?
a. 8 ½ inches c. 9 ½ inches
b. 8 ¼ inches d. 9 ¼ inches
16. What is the computed measurement of 38 inches of waist circumference divided into 1/4
of measurement needed?
a. 8 ½ inches c. 9 ½ inches
b. 8 ¼ inches d. 9 ¼ inches
17. One of the characteristics of the sleeping garment
a. It is made of expensive materials. c. It is thick and long.
b. It is comfortable to the wearer. d. It is easy to wash.
18. A fabric which is ideal for sleeping because it contains lustrous fiber material from plant.
a. Cotton c. Linen
b. Wool d. Silk
19. The chronological steps or operations involved to accomplish the project
a. Evaluation c. procedure
b. Objectives d. design specification
20. A part of a project plan that itemized the list of tools and supplies needed to produce a
project.
a. Objectives c. materials needed
b. Procedure d. evaluation
21. It is a pattern symbols that direct the dressmakers where to stitch on the fabric.
a. Hemline c. Grainline
b. Seamline d. Raw edge
22. An edge produced on woven fabric during manufacture that prevents it from unravelling.
a. Woof c. Grainline
b. Raw Edge d. Selvage
23. It is the level of the lower edge of a garment such as a skirt, dress, or coat.
a. Hemline c. Grainline
b. Seamline d. Raw edge
24. The side of the fabric where the pattern should be laid.
a. Right side c. Bigger side
b. Wrong side d. Smaller side
25. One of the characteristics of disappearing marking pens used by tailors
a. It can be easily removed c. It stays longer when washed
b. It cannot be affected by dry cleaning d. It stains the garment
26. In what direction the dressmaking carbon should be inserted between the pattern and
fabric?
a. Right c. left
b. Down d. up
27. While cutting the fabric it is advisable to place the other hand on _______
a. the table c. your side
b. the edge of the cloth d. top of the cloth
28. In drafting pattern for shorts sleeping garment hip 2 circumference is divided into
a. ¼ c. 3/4
b. ½ d. 1
29. It serve as valuable guide in laying, cutting and assembling the different parts during the
sewing
a. Pattern c. Garments
b. Style d. Blouse
30. It is a simple pattern which contains the exact body measurements and reflects no
definite style
a. Style pattern c. Garments
b. Foundation pattern d. Fabric
