Scribd
Upload
58 views2 pages

MPI Test Report for Padeeye Inspection

The visual and magnetic particle inspection report summarizes the inspection of a padeye mounted on a basket. The inspection found no relevant defects in the 100% weld and heat-affected zone of the 7-inch by 4 1/4-inch by 3/4-inch thick carbon steel padeye with a 1 1/2-inch bore. Wet magnetic particle testing was performed using a permanent magnet, contrast paint, and prepared bath, with no discontinuities detected. The padeye was deemed acceptable with no defects found.

Uploaded by

michael
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
58 views2 pages

MPI Test Report for Padeeye Inspection

The visual and magnetic particle inspection report summarizes the inspection of a padeye mounted on a basket. The inspection found no relevant defects in the 100% weld and heat-affected zone of the 7-inch by 4 1/4-inch by 3/4-inch thick carbon steel padeye with a 1 1/2-inch bore. Wet magnetic particle testing was performed using a permanent magnet, contrast paint, and prepared bath, with no discontinuities detected. The padeye was deemed acceptable with no defects found.

Uploaded by

michael
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

VISUAL & MAGNETIC PARTICLE INSPECTION REPORT 2023-01-0320

PADEYE MOUNTED ON BASKET LOCAL#: JLL-B-01


CLIENT: JAMZ LOGISTICS LTD
ADDRESS: #8 LALBEHARRY TRACE, DEBE.

INSPECTION DATE: 2023 JANUARY 25TH


EXPIRY DATE: 2028 JANUARY 24TH

COMPONENTS: PADEYE
LOCATION: DEPL YARD.
INSPECTION STANDARDS; ASME SEC, V. ART. 7 & 25 AND ASTM E709, AWS D1.1 & API RP 08 B
DIAGNOSTIC AREA: 100% WELD AND HAZ
DIMENSIONS: 7” LENGTH X 4 ¼” WITH X ¾” THICKNESS X 1 ½” BORE
TEST METHOD: WET(SPRAY)/ VISUAL
MANUFACTURING PROCESS: WELDED
MATERIAL: CARBON STEEL

EQUIPMENT USED
1.MAGNET TYPE: CANDET PERMANENT MAGNET SERIAL# 95110

2. CHEMICALS: 1.) MAGNAFLUX WHITE CONSTRAST PAINT WCP 2


2.) MAGNAFLUX PREPARED BATH 7HF (SUSPENDED IN PARAFFIN)

TECHNIQUE
INITIAL DEMAGNETIZATION: N/A FINAL DEMAGNETIZATION: N/A
CONTACT SPACING: 4-6” APPLICATION: SPRAY
TEST TEMPERATURE: AMBIENT TIME: 10 SECONDS
CURRENT: N/A SURFACED: BUFFED CLEANED

COMPONENTS: REMARKS: STATUS:

1. PADEYE NO RELAVANT DEFECTS FOUND ACCEPTABLE

This certificate is to certify that on 2023 JANUARY 25TH a thorough inspection was carried out and the above is a true representation of our
findings.

1|Page
DESCRIPTION PHOTOGRAPH PASS/FAIL
PADEYE ON BASKET No discontinuities were found.

2|Page

You might also like