Scribd
Upload
2K views2 pages

Fault Code 144: Coolant Sensor Issues

Fault Code 144 indicates that the coolant temperature sensor is reporting a voltage above normal or is shorted to a high source. This could be caused by an open or short in the sensor wiring or a failed temperature sensor. The coolant temperature sensor monitors engine coolant temperature, which is important for engine protection systems, timing, and fueling control. If Fault Code 144 is present, it could lead to possible white smoke and lack of engine protection for coolant temperature.

Uploaded by

Dung Pham
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
2K views2 pages

Fault Code 144: Coolant Sensor Issues

Fault Code 144 indicates that the coolant temperature sensor is reporting a voltage above normal or is shorted to a high source. This could be caused by an open or short in the sensor wiring or a failed temperature sensor. The coolant temperature sensor monitors engine coolant temperature, which is important for engine protection systems, timing, and fueling control. If Fault Code 144 is present, it could lead to possible white smoke and lack of engine protection for coolant temperature.

Uploaded by

Dung Pham
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

9/21/22, 12:02 PM QuickServe Online | (3666113) 

  QSK19, QSK23, QSK45, QSK60, and QSK78 Electronic Control System Troubleshooting and R…

(/qs3/pubsys2/xml/en/manual/3666113/3666113-titlepage.html)

Fault Code: 144


Coolant Temperature Sensor Circuit - Voltage Above Normal or
Shorted to High Source

Overview
Codes Reason Effect
Fault Code: 144
Coolant Temperature Possible white smoke. No
PID(P): P110
Sensor Circuit - Voltage engine protection for coolant
SPN: 110
Above Normal or Shorted to temperature. Centinel
FMI: 3
High Source system may be disabled.
Lamp: Yellow

SRT: 00-355

Coolant Temperature Sensor Circuit

Circuit Description

https://quickserve.cummins.com/qs3/portal/service/manual/en/3666113/ 1/2
9/21/22, 12:02 PM QuickServe Online | (3666113)   QSK19, QSK23, QSK45, QSK60, and QSK78 Electronic Control System Troubleshooting and R…

The engine coolant temperature sensor is used by the electronic control module (ECM) to
monitor the temperature of the engine
coolant. The engine coolant temperature is used by the
ECM for the engine protection system, timing, and fueling control.

Component Location
Refer to Section E for a detailed component location view.

Shoptalk
All temperature sensors:

Temperature (°C) Temperature (°F) Resistance (ohms)


0 32 30k to 36k
25 77 9k to 11k
50 122 3k to 4k
75 167 1350 to 1500
100 212 600 to 675
The resistance of the sensor varies with temperature. The reading that you observe will compare
to the table is the sensor
is functioning properly.

Fault Code 144 can be caused by the following:

Open in the signal or return wires


Voltage short in the signal or return wires

Failed temperature sensor.

Refer to Troubleshooting Fault Code t05-144 (/qs3/pubsys2/xml/en/procedures/19/19-t05-144.html)

Last Modified:  19-Aug-2010

https://quickserve.cummins.com/qs3/portal/service/manual/en/3666113/ 2/2

You might also like