QUICK LOAD SERVO 80 S2 BARFEED

SHORT AUTOMATIC BAR FEEDER FOR

SPINDLE LENGTH BARS FOR FIXED OR
TRAVELING HEADSTOCK TURNING
MACHINES

Diameter range: 1/4” - 3 - 1/8” (6 mm to 80 mm)

Overall barstock length: 14” to 63”*
*Not to exceed overall length of spindle

YOUR “ONE-STOP-SHOP”
FOR MACHINE-TOOL PERIPHERALS
 Simplicity For Efficiency
The Quick Load Servo 80 S2 is designed for automatic loading of spindle length
bars up to 63” and 3-1/8” in diameter without exceeding the spindle length.
Using the proven concept of the Quick Load Servo 80, the Quick Load Servo
80 S2 is fully electric and does not require shop air. It is equipped with an
automatic diameter changing system with linear motors and LNS servo motor
technology. Centerline and bar loading fingers adjust automatically as the new
bar diameter is entered in the prompting remote HMI. No manual adjustment is
required reducing changeover time to a minimum.

Increasing Your Productivity With Quick Production Setup

Changeovers, The Fastest in The Industry
Difficult and time consuming diameter changeovers can slow your
production down. Simplified and quick diameter changeovers can
keep your production running efficiently and allow you to meet customer
demands.
Start-up and diameter changing can be performed in record time thanks
to the intuitive controls. The Quick Load Servo 80 S2 automatically
makes all changeover adjustments by answering three simple questions
when prompted by the remote control:
1. Shape?
2. Diameter?
3. Part Length?
Within the pusher diameter your changeover is complete in seconds. The
Quick Load Servo 80 S2 takes the information and automatically makes
these adjustments:
• Bar to centerline of the lathe
• Magazine storage bar selection mechanism to bar diameter
ensuring one bar is loaded at a time
• Feed and torque rates

All Electric Operation

Modern manufacturing facilities require the most reliable equipment
designs for maximum uptime.
The Quick Load Servo 80 S2 uses a linear motor for the table elevating
precisely the bar stock to the centerline of the lathe. The pusher is
controlled by a servo drive for accurate positioning and optimum loading
speed. Only field proven and readily available components are used to
increase reliability over a long life time.

Faultless Unattended Operation

Downtime can be costly. You need to rely on your machines to produce
the highest quality parts keeping you at maximum productivity through all
shifts, even unattended operation.
The LNS servo motor control technology provides the Quick Load Servo
80 S2 with a precision of bar positioning which is unrivalled on the
market. It guarantees accurate bar feedout control with or without turret
help and prevents from hitting the turret with its soft touch positioning.

2
Space Saving Design
Large, over-sized machines consume valuable floor space. A machine occupying
less floor space creates minimal footprints and increases production.
The Quick Load Servo 80 S2 requires minimum floor space allowing the operators
to maneuver around the machine and bar feeder in ease.

No-Mess, No-Hassle Changeovers

Facility cleanliness can boost production morale and keep your production
running smoothly free from debris.
The machine has a loading ramp with adjustable inclination, which also acts as
an on board storage for arranging the spindle liners and pushers.
Standard Z or X axis retraction system can be chosen at time of installation and
allows E-Z spindle liner changes and machine access.

Increasing Production Efficiency Through Innovation

Any amount of time saved during production increases efficiency resulting in a
better ROI.
The Quick Load Servo 80 S2 has surpassed industry technology by incorporating
a “Parts Library”, which is a 500 parts storage feature. The “Parts Library” allows
the user to store specific parameter configurations that are unique to a machining
program.
Simply enter part parameters:
• Stock Shape
• Stock Diameter
• Part Length
• Any additional parameter information…
The part parameters are entered ONE time into the “Parts Library”. After all the
parameters have been entered, the configuration is saved as a unique number
that will be associated to a specific machining program.
Whether you need to run the job now or at a later time, simply selecting the
desired part number from the “Parts Library” will instantly restore the appropriate
data.
The “Parts Library” is a standard benefit and can be used with a Standard or
Ethernet interface.

3
 Specifications subject to change without notice

QUICK LOAD SERVO 80 S2 BARFEED

TECHNICAL SPECIFICATIONS

Capacity
Diameter mm 6 - 80
300 - 1600
Bar Length (14” to 63”) mm
not to exceed overall length of spindle
Loading System Side Load Rack
Loading Capacity mm 650
Loading Front / Rear
Shipping Weight lbs 1,150
Applications
Type of Headstock Fixed / Traveling
X or Z Axis Retraction mm 600
Changeovers
Partial changeover sec 15 or less
Complete changeover min 1 or less
Driving Systems and Bar Support
Motor Servo Barstock Straightness Specifications and Performance
For optimum rotational performance speeds, bar stock straightness needs to
Drive Notched Belt be .020” per 3.25 feet, non accumulative. Bar stock out of this tolerance
will not run at optimum RPM. Other factors such as material type (brass,
Other copper, bronze and other malleable materials), clamping efficiency of the
machine workholding, alignment of the bar feed, oil type, bar preparation
Parts Library 500 Parts Program Storage and spindle liners will affect optimum RPM capability of the system.

Specifications subject to change without notice / Quick Load Servo 80 S2 / 01-2017

YOUR “ONE-STOP-SHOP” FOR MACHINE-TOOL PERIPHERALS

LNS provides a full range of barfeeders, chip conveyors, coolant management systems, air filtration systems, and workholding systems that is second to none on the market. We are known in the industry for
the solid experience we have gained over several decades in an exceptionally wide range of applications, our excellent customer service, and our technical support. This support is ensured by highly qualified
technicians who are available throughout North America.

LNS America, Inc.

LNS America 513-528-5674 ISO 9001-10013185
LNS Turbo
ISO 9001-10000276
4621 East Tech Drive [email protected] Facilities covered by this mark have been
evaluated to international quality assurance
Cincinnati, Ohio 45245 www.LNS-america.com standards by UL DQS Inc.