MAKE YOUR CREATIVITY STICK
CARD STAR
KIRIGAMI
KIRIGAMI CARD STAR
Gluing
Decorating Paper
CRYSTALLIZED Swarovski Elements
Article Product Group Flat Backs No Hotfix Flat Backs No Hotfix Crystal-it Crystal-it Article No. 2709 2709 75011 75011 Amount 6 pcs. 6 pcs. 86 pcs. 52 pcs. Size 10x6 mm 13x8 mm SS06 SS10 Colour Black Diamond Black Diamond Crystal Dorado Crystal Dorado Colour Code 215 215 001 DOR 001 DOR
Supplies & Tools
Supplies Cardboard, gold, DIN A4 Paper, dark brown,DIN A4, 2 pcs. Transparent paper Tools Cutter, Compass, Glue, Needle, Pencil, Ruler, Scissors, Stapler Tweezers
Level of Design: INTERMEDIATE Have a look at the text instruction at the last page!
STEP 1
1:2
[Link]
2/15
STEP 2
STEP 3
[Link]
3/15
STEP 4
STEP 5
[Link]
4/15
STEP 6
STEP 7
[Link]
5/15
STEP 8
1:1
[Link]
6/15
STEP 9
[Link]
7/15
STEP 10
[Link]
8/15
STEP 11
6x 6x
13 mm 10 mm
Gl
ue
1:2
[Link]
9/15
STEP 12
Repeat steps 1 - 5 :
Repeat step 6
STEP 13
[Link]
10/15
STEP 14
[Link]
Gl
ue
11/15
STEP 15
21.5 cm
15.2 cm
[Link]
12/15
[Link]
Gl
ue
13/15
[Link]
14/15
CREATE YOUR STYLE with CRYSTALLIZED Swarovski Elements Design Elements Design Project Kirigami Card Star
Step 1: Step 2: Step 3: Step 4: Step 5: Step 6: Step 7: Step 8:
Construct pattern on paper using ruler, compass and a pencil. The blue lines fold down and red lines fold up. Draw pattern on transparent paper with a bit of overlapping lines for edges of the star, so the point where two lines meet is the edge of the star. Staple the pattern onto the cardboard as shown in the illustration. Pin the points with a needle as shown in the illustration. Remove the transparent paper; you would notice the holes on the cardboard in the illustration. With the help of holes on the cardboard recreate the shape of the star. Cut the surface area of red and blue lines as shown in the picture with a cutter (do not cut all the way through the cardboard) and fold the partially cut parts as you can see in magnifiers in illustration. Cut and carefully pull out the sides that are supposed to come up as shown in the illustration. Apply CRYSTALLIZED Crystal-it onto areas as shown in the illustration. Glue the CRYSTALLIZED Flat Backs No Hotfix article 2709 on to the star with tweezers (see illustration). Repeat steps 1 5 to staple on the pattern used in the layout prepared earlier on to a brown paper this time as shown in the illustration. Now repeat step 6 and remove the transparent paper. Cut out the star shape from the brown paper with the help of a cutter as shown in the illustration. Glue the brown paper onto the front side of the gold cardboard as shown in the illustration. Cut out a piece of brown paper 21.5x15.2 cm and glue the star onto it as shown in the illustration. Remember to glue it on the cardboard in the folded shape as shown in the illustration so that the proportions stay intact.
Step 9: Step 10: Step 11: Step 12:
Step 13: Step 14: Step 15:
[Link]
15/15
