Scribd
Upload
104 views1 page

Datasheet Matrox EX 60 en

This technical data sheet provides information on Matrox EX 60, an engineering plastic with an extremely low coefficient of friction and very good abrasion and wear resistance. It has a density of 0.94 g/cm3, water absorption below 0.01%, and a melting temperature of 135°C. The plastic has a tensile modulus of 700 MPa, Shore hardness of 63 on the D scale, and withstands wear in sand-slurry testing. It also has high volume and surface resistivity of 106 Ω*cm, making it suitable for applications requiring insulation.

Uploaded by

jhax90
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
104 views1 page

Datasheet Matrox EX 60 en

This technical data sheet provides information on Matrox EX 60, an engineering plastic with an extremely low coefficient of friction and very good abrasion and wear resistance. It has a density of 0.94 g/cm3, water absorption below 0.01%, and a melting temperature of 135°C. The plastic has a tensile modulus of 700 MPa, Shore hardness of 63 on the D scale, and withstands wear in sand-slurry testing. It also has high volume and surface resistivity of 106 Ω*cm, making it suitable for applications requiring insulation.

Uploaded by

jhax90
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

Technical Data Sheet

Matrox® EX 60

Product characteristics Product applications


Extremely low coefficient of friction Lining technology
Very good abrasion and wear resistance Environment and disposal technology
Antistatic

Test method Unit Guideline Value


General properties
Density DIN EN ISO 1183-1 g / cm3 0,94
Water absorption DIN EN ISO 62 % <0,01
Flammability (Thickness 3 mm / 6 mm) UL 94 HB
Molecular weight - 106 g/mol ~9
Mechanical properties
Yield stress DIN EN ISO 527 MPa 22
Elongation at break DIN EN ISO 527 % >50
Tensile modulus of elasticity DIN EN ISO 527 MPa 700
Notched impact strength DIN EN ISO 179 kJ / m2 no break
Shore hardness DIN EN ISO 868 scale D 63
Wear resistance Sand-slurry 100
Thermal properties
Melting temperature ISO 11357-3 °C 135
Thermal conductivity DIN 52612-1 W / (m * K) 0,41
Thermal capacity DIN 52612 kJ / (kg * K) 1,90
-6
Coefficient of linear thermal expansion DIN 53752 10 / K 150-230
Service temperature, long term Average °C -250 … 80
Service temperature, short term (max.) Average °C 130
Vicat softening temperature DIN EN ISO 306, Vicat B °C 79
Electrical properties
Volume resistivity DIN EN 62631-3-1 Ω * cm 106
Surface resistivity DIN EN 62631-3-2 Ω 106

The data stated above are average values ascertained by statistical tests on a regular basis. They are in accordance with DIN EN 15860. The data above are provided purely for
information and shall not be regarded as binding unless expressly agreed in a contract of sale.

Röchling Engineering Plastics SE & Co. KG


Röchlingstr. 1 • D-49733 Haren/Germany • Tel. +49 5934 701-0 • Fax +49 5934 701-299
[email protected] • www.roechling-industrial.com
Date: 19/09/2019 Version: 2.0.0
Page: 1/1

Powered by TCPDF (www.tcpdf.org)

You might also like