0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14

club 3 asia projects inc. A S B U I L T P L A N S

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14

11.30

1.00 4.65 5.65 1.00

6.54
1. ALL STRUCTURAL STEEL WORKS SHALL BE IN ACCORDANCE WITH AISC SPECIFICATIONS
1.00 5.54 1.00 FOR THE DESIGN, FABRICATION AND ERECTION OF STRUCTURAL STEEL FOR BUILDINGS.

1.08
RB-1 RB-1 RT-1
GIRDER RAFTER 2. ALL STRUCTURAL SHAPES AND PLATES SHALL CONFORM TO ASTM A36. THE
CONTRACTOR SHALL SUBMIT CERTIFIED MILL TEST REPORTS ON CERTIFIED REPORTS

2.68
1.08

OF TESTS MADE BY THE FABRICATOR OR A TESTING LABORATORY IN ACCORDANCE

RT-1 RB-1

RT-1
WITH ASTM A6 OR A568, AS APPLICABLE, AND THE GOVERNING SPECIFICATION SHALL

0.40
1.66

CONSTITUTE SUFFICIENT EVIDENCE OF CONFORMITY WITH ASTM STANDARDS.

RB-1
RT-1 TOP / BOT. 14" x 2" X 2" STD ADDITIONALLY, THE FABRICATOR SHALL PROVIDE AN AFFIDAVIT STATING THE

2.68
RB-1
STUCTURAL STEEL FURNISHED MEETS THE REQUIREMENTS OF THE GRADE SPECIFIED.
1.66

3
2- 2 x 2 x 16" RAFTER
RB-1
RB-1

RT-1 RT-1
3. ALL SPLICES AND CONNECTIONS SHALL BE DESIGNED FOR AT LEAST 125% OF
1.66

C-PURLINS @ 0.60 M.OC. THE CAPACITY OF THE MEMBER BEING JOINED OR A MINIMUM STRESS OF 6 KIPS.
2 x 3 x 6 m. x 1.2mm.

2.68
RT-1
4. ALL STRUCTURAL WELDINGS SHALL CONFORM TO E70XX.
RT-1
1.66

RB-1

2 x 3 x 6 C-PURLINS SPACED
RT-1 RB-1 @ 0.30 ON BOTH WAYS
3 1 1
16" x 1 2" x 2"
5. ALL STRUCTURAL BOLTS SHALL CONFORM TO ASTM STANDARDS FOR CHEMICAL BOLTS
MEMBER DIAGONAL
AND CAPSULES. THE CAPSULE SHALL BE EPOXY ACRYLATE AND THE ANCHOR SHALL
1.08

2.68
RB-1
BE ZINC ELECTRO-PLATED WITH CHROMATE CONVERSION COATING.

0.3
0
RB-1 RT-1 RB-1
6. THE CONTRACTOR SHALL SUBMIT SHOP / FABRICATION DRAWINGS OF ALL STEEL

1.08
FRAMING TO INCLUDE MATERIAL SCHEDULES, ERECTION SCHEMES, DETAIL OF
CONNECTIONS, AND SPLICES FOR REVIEW AND APPROVAL OF ENGINEER PRIOR TO

0.25
2 ANGLE BAR 1 "
x 2" x 2" ERECTION AND INSTALLATION.
1.08

RB-1 RT-1
1" x 10" x 8" HARDIFLEX 7. THE STRUCTURAL STEEL SURFACE SHALL BE APPLIED WITH A SHOP COAT OF ZINC
FASCIA BOARD
1.36

CHROMATE PRIMER PAINT AFTER FABRICATION AND PRIOR TO ERECTION AND SECOND
RT-1 VERIFY ACTUAL VERIFY ACTUAL
AND SECOND OF THE SAME PAINT AFTER WELDING AND / OR ERECTION
AND INSTALLATION.
2.72

RT-1
8. THE CONTRACTOR SHALL VERIFY ACTUAL DIMENSIONS SHOWN IN THIS DRAWINGS
RB-1

2 x 3 x 6 C-PURLINS SPACED
@ 0.30 ON BOTH WAYS
RT-1 AT JOB SITE PRIOR TO PREPARATION OF SHOP DRAWINGS.
RB-1
2.04

RT-1 2 RAFTER TRUSS DIAGRAM GUSSET VERTICAL

MEMBER BASE PLATE
N T S PLATE
2- 2 x 2 x 3
16" RAFTER S 2 VERTICAL MEMBER
RT-1 WELD
WELD GUSSET PLATE
2.04

WELDS BOLTS DIAGONAL MEMBERS

RT-1 RB-1
1.08

WELD BOTTOM CHORD

BEAM/SUPPORT
1.00 0.50 3.45 1.00 PLAN
TYPICAL (1A)
TOP CHORD
VERTICAL MEMBER
WELD GUSSET PLATE
1.00

WELD GUSSET PLATE WELDS

RT-1 RB-1 VERTICAL MEMBER
WELDS (1C)
RB-1

BOTTOM CHORD
DIAGONAL MEMBER
RB-1

TYPICAL (1C)
2.00

3 BASE PLATE
2- 2 x 2 x 16" RAFTER
RB-1 BOLTS
RT-1
TYPICAL (1B) VERTICAL MEMBER
BEAM/ SUPPORT
ELEVATION
2.00

2 x 3 x 6 C-PURLINS SPACED
DIAGONAL MEMBER
@ 0.30 ON BOTH WAYS
RB-1
RB-1

WELDS
RT-1 RB-1
VERTICAL MEMBER GUSSET PLATE
ANGLE BAR (METAL CLIP)
DIAGONAL MEMBER
1.00

BOTTOM CHORD
SLOTS FOR GUSSET PLATE
CONNECTING BOLT
1 ROOF FRAMING PLAN 1.00 4.65 1.00 FULL WELD
WELDS (1C)

S C A L E 1 : 1 0 0 M T S . TYPICAL (1B) DIAGONAL MEMBER

S 2 TOP CHORD

TOP CHORD WELDS

DIAGONAL MEMBER
PURLIN GUSSET PLATE
WELDS
TOP CHORD GUSSET PLATE
VERTICAL MEMBER
VERTICAL MEMBER
DIAGONAL MEMBER
DETAIL OF METAL CLIP
ARCHITECT REVISIONS SHEET CONTENTS SHEET NO.
AS-BUILT PLAN
AS BUILT PLANS

club 3 asia projects inc.

HOTEL VIDA AUXILIARY BUILDING
M.A. ROXAS HIGHWAY, CSEZ, CLARKFIELD, PAMPANGA
S2
ARCH. REYNOLD S. BASILIO
architects . interior designers . construction manager . builders
WIDUS INTERNATIONAL LEISURE, INC.,
2nd floor unit, 101- C FRDC Bldg. Greenfields Square,
Mc Arthur Highway, Sindalan City of San Fernando tel. no. 045-8614390
REG. NO.
PTR.
OO15407
2167316
T I N . 207 557 391000
DATE ISS. JAN. 22, 2009
REG.NO.
PTR.NO
TIN.
DATE ISS. OWNER
5