MULTIFOAM

PRO 5145

Imported in India by Manufactured in

Germany,Europe by
PRODUCT DESCRIPTION

● 1C-PU Premium fixing and filling foam

● Flammability classification E according EN 13501-1
● German Building standard (B2 DIN4102)
● Expansion 30-100%
● Propellant base-HFC-free
● A natural ingredient is added to fend off insects,bugs & beetles
● Act as sound barrier
● Higher stability for door & window fixing
● Stable volume,non shrinking
● Foam strip per can of 750 ml (20x50mm) of approx.33+/-3m(50l)
● Safe, efficient and universal application
● Safety valve,TUV approved
● Increased volume allows for greater coverage and application efficiency
● Ability to create air, wind, water, gas-tight seals
● Sets it apart from other materials in its price range
 APPLICATION

• Installation of door frames with/without mechanical fasteners, improve overall stability

and reduce plaster cracks around the door frame & anchor fastener.
• Insulation of facade, window for air-wind-water-gas tightness,fixing with higher
stability.
• Filling and sealing of wall openings, connection joints, holes, etc.
• As back up material to expansion joints.
• Insulation in H.V.A.C./ M.E.P.
• Isolation and sealing of gaps in general
• Staircase cavities,duct shafts
• Insulate under ground cables to protect from water and rodents.
• Boat building,model making
• To absorb vibration and sound.
FEATURES AND CHARACTERISTICS

• A natural odour is added to fend off insects, bugs & beetles. (Patented)
• The closed cell structure forms an impermeable layer which is an effective barrier to water and vapour
• Thermal resistance of cured foam -40°C to +80°C briefly up to 120°C. Self adherence
• Non-toxic, environment friendly product (V.O.C.-124 gm/750 ml/50 L.)
• Very good sound barrier, reduces noise transmission and heat transfer
• High thermal insulation, helping to improve energy efficiency
• It can be cut, plastered and painted for a perfect finish
• Does not shrink, sag, crack, crumble or rot once cured and covered/ coated
• Track-free approximately 10 minutes. Stable after 4-6 hours
• Shelf life of can up to 24 months
• Foam yield per can of 750 ml using dispenser gun is up to 50 litres
Insulate upto 50 rft of door frames (100*65*12-15 mm) or 80-100 [Link] window frames/facade (50*-65*10-12 mm) per can of MULTIFOAM PRO 5145 using a dispenser gun.

Comparison of Door Frame Installation Methodologies in India

USING
USING HOLD -FAST USING MULTIFOAM
ANCHOR-FASTNER

S.N. ITEM ITEM APP. COST RS. ITEM APP. COST RS. ITEM APP. COST RS.
Cost Analysis
1 HOLD-FAST REQD NO NOT NECESSARY
2 ANCHOR-FASTNER NOT RQD. REQUIRED NOT REQUIRED

3 MULTIFOAM PRO 5145 MAY BE MAY BE REQUIRED

4 PLAIN CEMENT CONCRETE REQUIRD REQUIRED NOT REQUIRED
5 BLACK JAPAN PAINT REQUIRD REQUIRED NOT REQUIRED
6 COVERING OF ANCHOR HEAD NOT RQD. REQUIRED NOT REQUIRED
7 REPAIRING OF WOODEN FRAMES (Spoiled) REQUIRD REQUIRED NOT REQUIRED
8 REPLACMENT OF WOODEN FRAMES MAY BE MAY BE NOT REQUIRED

9 WOODEN FRAMES INSTALLED WITH SUPERSTRUCTURE REQUIRD REQUIRED NOT REQUIRED

10 CIVIL REPAIR (CHIPPING & PLASTERING) REQUIRD REQUIRED NOT REQUIRED
INTEREST ON FRAME COST([Link].2500-FOR 18
11 MONTHS) APPLICABLE 600 APPLICABLE NOT APPLICABLE
12 CRACK APPEARS AROUND DOOR FRAMES YES YES NO
13 LABOUR COST FOR INSTALLATION OF FRAME YES YES YES but much lesser
TOTAL COST FOR COMPARISON AND UNDERSTAND
EXISTING-COSTING FOAM & HOLD FAST FOAM & ANCHORS ONLY MULTIFOAM

ADDITIONAL BENEFITS USING MULTIFOAM PRO

1 AIR TIGHTNESS ASSURED NO NO YES
2 WATER TIGHTNESS ASSURED NO NO YES, < 2 Vol-%
3 SOUND INSULATION NO NO YES 61(-1;-4) Db
4 THERMAL CONDUCTIVITY AT 30 DEGREES. ? ? 0.041W/m-k
5 GREEN-PRODUCT NO NO YES,V.O.C. 0.124 KG./750 ML
6 VARIATION IN VINEAR DOOR & FRAME YES MAY BE NO CHANCE
7 INSTALLATION-TIME MORE MORE QUICK
8 COMPRESSIVE STRENGTH after 24 hrs.N/CM2 ? ? 7+/- 2
9 TENSILE STRENGTH after 24 hrs., N/CM2 ? ? 10+/- 2
10 SHEAR STRENGTH/CM2 ? ? 5+/- 2
11 SURFACE CRACKS YES YES NO
12 THE HOME GROUND FOR INSECTS TO LIVE, GROW, AND SPREAD. YES YES NO
13 BULK DENSITY,FOAM JOINT 20+/-2KG/M3
 DOOR FRAME INSTALLATION

ADVANTAGES:
• Door frame installed with Multifoam Pro exhibit higher stability and are resistant to shaking or [Link] impact force is distributed evenly all around the frame minimising the appearance of
cracks on the surface.
• By not requiring hold fast or anchor fasteners , there is a reduction in hardware cost.
• The omission of black japan coating further lowers expenses.
• Installing the door frame over the flooring eliminate the need to cut the frame profile in tiles, making the installation process easier ,cleaner,much faster and more efficient.
•Door frame installed with MULTIFOAM is almost unshakable and banging impact over door frame is shared equally hence
the cracks appearing on the surface are minimal.
•Offer significant cost savings,reduces repair & maintenance exp.,simplifies the installation process, enhances the stability and durability of the door frames.
WINDOW FRAME INSTALLATION

Install window frame Align window frame horizontally and Fix frame with Drill hole through

into wall leaving 10-12 vertically with 10-12 mm aluminum composite aluminum composite

mm gap all around thick aluminum panels. packing around frame to

over the rough composite panel packing be screwed through the

plastered masonry or any other hard metal wall and shall remain

wall. below track permanently

Dowel and screw Fill gaps between frame and

After total curing install window sill if
the frames onto wall. wall with Multifoam and cover necessary
(24h) you may hang
Hang in window and the P.U. Surface with cement
in window.
check all mechanism. plaster / Elastomeric Paint on

exterior side and cement

plaster/ P.O.P./ gypsum, putty

Fettle gaps for
with paint from inside.
protecting and

sealing PU-foam.
WALL CRACK FILLING

1. Deep open the cracks with the help of suitable tools.

2. Splash water on open crack and wipe it with sponge.
3. Apply MULTIFOAM PRO using dispenser
gun and nozzle into the open cracks.
4. Leave it to expand for about 24 hrs.
5. Apply putty/plaster after 24 hrs of applying
MULTIFOAM PRO to finish the work.
6. Wall surface is now ready to paint.
PLUMBING PIPE INSULATION

• MULTIFOAM is an
appropriate material for heat
insulation as it absorbs heat
radiation from -30°C to
+80°C (briefly up to 120°C).
• Due to heat absorption there
would be no cracks appearing
on plaster or tiles due to the
excess heat generated from
heater pipes.
• Thus power consumption
reduces to some extent since
there is no loss of heat, the
water in the pipe remains hot
for a longer duration.
OTHER USES

MULTIFOAM PROcan also be used in Window A/C installation and Staircase Cavity filling.
 One Component PU Foam – Short Product Information

Index Technical Description Advantages to the Customer

Application Universal formulation for all applications Cost effective due to multipurpose use

Yield Comparatively high yield per can Very economical cost/performance ratio

Fire Classification B2 in accordance with DIN 4102 Cured foam is self extinguishing

CFC Free 100% CFC Free propellant (ODP = 0) Protection of environment and user

Formaldehyde Free Contains no formaldehyde No health hazards

Solid Valve (Gun Foam) Patented solid valve with no rubber parts Trouble free and clean application

Handling Shake can and screw an adaptor or gun Use single handedly, no after flow
Material/Time Saving
(Gun) Optimum dosing possible with Puratool Gun Time saving and economical

Recycling Special waste, no DSD ( green spot), PDR PDR guarantees reasonable recycling

Greenhouse Effect Savings in thermal insulation causing this Protection of the environment

Thermal Insulation Good due to low thermal conductivity Maximum resulting in energy and cost saving

Future All alternatives are less advantageous Use of an Ecologically reasonable material
PURAPLAST
PURAPLAST
u PVC – Adhesive and Repair
Special adhesive used in bonding and repair of u PVC profile in window construction market and
bonding of profile materials such as runoff slats, striking slats, weather bars rolling blind parts,
resistance of ABS (pipes, plates, injection molded parts)

• Professional and easy application on job-site.

• Expanding welding agent based on vinyl chloride polymers.
• Patented formulation with additional UV-Protector for virtually no yellowing effect
• Quick curing by solvent welding system
• Gap filling and repair
• Good resistant to water, alcohol, oil, gasoline.
• Very precise dosing
• No dispenser/tool necessary
• Stop and Go application
PURASEAL 868

Window repair sealant for aluminium window market.

PURASEAL 868 is a special sealing and elastic bonding system for constructional work and
repair of aluminium, special plastic parts (like insulation bar), glass and stainless steel.
• Professional application
• Self levelling system
• Filling of small gaps
• Transparent for universal quick application
• Excellent weather and UV resistance
• Non Corrosive
• Very precise dosing
• No dispenser/tool necessary
• Stop and Go application
Testimonial
To watch the complete demo video of MULTIFOAM PRO application kindly click on the below
YouTube links.

[Link]
[Link]