Page 1 of 18

Issuing date: January 10, 2021

Safety Data Sheet (SDS)

Prepared in accordance with Regulation (EC) No. 1907/2006 (REACH), Annex Ⅱ, as amended by
Commission Regulation (EU) 2020/878.

1. Identification of the substance/mixture and of the company/undertaking

1.1. Product identifier
Product name: Epoxy Part A
Product type：Resin
1.2. Relevant identified uses of the substance or mixture and uses advised against:
For sealing and bonding.
1.3. Details of the supplier of the safety data sheet
Company: Zhejiang Guoneng Technology Co., Ltd.
Address: NO.1518 MENGXI ROAD, HUZHOU, ZHEJIANG, CHINA
TEL: 0086-572-2109399
FAX: 0086-572-2352225
Email: [email protected]
1.4. Emergency telephone number
Emergency telephone number: 0086-572-2109399
Intended use: It is used for sealing and bonding.
Further information: Zhejiang Guoneng Technology Co., Ltd.

2. Hazards identification
2.1. Classification of the substance or mixture:
2.1.1. Classification according to Regulation (EC) No 1272/2008 (CLP):
Skin corrosion/irritation Category 2 - (H315)
Serious eye damage/eye irritation Category 2 - (H319)
Skin Sensitisation Category 1 - (H317)
Hazardous to the aquatic environment - chronic Category 2 - (H411)
2.1.2. Additional information: For full text of Hazard- and EU Hazard-statements: see SECTION 16.
2.2. Label elements
Labelling according to Regulation (EC) No 1272/2008 [CLP]: Not classified.
Hazard Pictograms:

Signal Word: Warning

Hazard Statements: H315 - Causes skin irritation.H317 - May cause an allergic skin reaction.
H319 - Causes serious eye irritation.H411 - Toxic to aquatic life with long lasting effects.
Precautionary Statements:P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several
minutes.Remove contact lenses, if present and easy to do. Continue rinsing.
P280 - Wear protective gloves/protective clothing/eye protection/face protection.
P302 + P352 - IF ON SKIN: Wash with plenty of soap and water.
P321 - Specific treatment (see supplemental first aid instructions on this label).
Response Precautionary Statements:No special requirements.
Storage precautionary statements:No special requirements.
Disposal precautionary statements:No special requirements.
 Page 2 of 18
Issuing date: January 10, 2021

2.3. Other hazards:

This product does not contain any PBT or vPvB substances.
Spills can represent a risk of slipping due to the grain shape.
Information of endocrine disrupting substances:No endocrine disruptors.

3. Composition/information on ingredients
Product description: substance ( ); preparation/mixture (√)

Ingredients/ CAS No. EC No. Index No. % by Classification

Components weight according to
Regulation (EC) No
1278/2008
(CLP).
Skin Irrit.2 H315
Epoxy resin 25068-38-6 500-033-5 Eye Irrit.2 H319
Not available 35-45%
Skin Sens.1 H317
Aquatic Chronic2 H411
Barium sulphate 13462-86-7 236-664-5 Not available 20-25% Not available
Calcuim carbonate 1317-65-3 215-279-6 Not available 10-20% Not available
Ferric oxide 1309-37-1 215-168-2 Not available 0-10% Not available

Note: The mixture does not contain endocrine disruptors.

4、First aid measures

4.1. Description of first aid measures:
General notes: No information available.
Following inhalation: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Call a
POISON CENTER or doctor/physician if you feel unwell.
Following skin contact: Rinse skin with water [or shower]. If skin irritation occurs: Get medical advice/attention.
Following eye contact: Remove contact lenses if present and easy to do, continue rinsing. If eye irritation
persists: Get medical advice/attention.
Following ingestion: Rinse mouth. Do not induce vomiting without professional instruction. Call a POISON
CENTER or doctor/physician if you feel unwell.
Self-protection of the first aider: No special requirement.
4.2. Most important symptoms/effects, acute and delayed: Acute effect: Not found. Delayed effect: Not found.
4.3. Indication of any immediate medical attention and special treatment needed: Treat according to
symptoms.

5、Fire-fighting measures
5.1. Extinguishing Media
Suitable extinguishing media: Use water spray, dry chemicals, carbon dioxide, foam, dry sand for extinction.
Unsuitable Extinguishing Media: High volume water jet. Discharging cylinder shape water from fire hose
may lead to spread fire to the surroundings.
5.2. Special hazards arising from the substance or mixture: The product is not flammable, and has no special
danger.
Hazardous combustion products: It may release smoke, carbon monoxide, carbon dioxide and other
hazardous gas from thermal decomposition.
 Page 3 of 18
Issuing date: January 10, 2021

5.3. Advice for fire-fighters:

For initial fire, use dry powder, carbon dioxide, etc.
For large fire, it is effective to use fire foam, etc. to shut off air supply.
Fire-fighters must wear self-contained breathing apparatus and full protective equipment (e.g. fire-retardant
clothing).
Deny unnecessary entry to the place around the fire.
Remove containers from fire area if it can be done without risk.
Cool surrounding facilities, etc. with water spray.
Extinguish fire from upwind, and the fire extinguishing method should be appropriate to the situation in the
surroundings.

6. Accidental release measures

6.1. Personal precautions, protective equipment and emergency procedures: Use proper personal protective
equipment as indicated in Section 8.
6.2. Environmental Precautions: Keep cleaning run-offs out of municipal sewers and open bodies of water.
Comply with local and national laws and regulations.
6.3. Methods and materials for containment and cleaning up:
Small Spill:
Mop up or absorb with an inert dry material (e.g. sand, dry lime) and place in an appropriately labeled waste
disposal container.
Large Spill:
Isolate contaminated area and set up a warning board. The persons handling emergency are recommended
wearing protective clothing. Do NOT touch spilled material. Keep away from heat and sources of ignition.
Build up dike or dig pit for collection. Spray fog water to cool down and dilute vapor. Dilute the spilled liquid till it
is not combustible. Protect the working staff. Collect the spilled material with explosion-proof pump into an
appropriate container and transport the waste to the disposal place.
6.4. Reference to other sections:
For more information, please refer to Section 8 and Section 13.

7. Handling and storage

7.1. Precautions for safe handing:
Wash hands thoroughly after handling.
7.2. Conditions for safe storage, including any in compatibilities
Technical measures and storage conditions: Store it in a well-ventilated, cool and dry store room. Long-time
direct sunlight and high temperature. Keep out of the reach of children.
Incompatible materials: No information available.
Packaging materials: Aluminum plastic pipe or plastic pipe.
Requirements for storage rooms and vessels: Well-ventilated and dry.
Storage class
 Page 4 of 18
Issuing date: January 10, 2021

Further information on storage conditions: The storeroom should be equipped with proper facilities for
accidental fire.
7.3. Specific end use(s): It is used for sealing and bonding.

8. Exposure controls/personal protection

8.1. Control parameters:
Ingredients COSHH Workplace OSHA PEL-TWA ACGIH TLV-TWA
exposure limits-TWA
No ingredients have an exposure limit Not available Not available Not available

8.2. Exposure controls:

8.2.1. Appropriate engineering controls
Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below
recommended exposure limits. Install washer eyes and safety showers near to the handling and storage area.
8.2.2. Personal protection equipment:
Hand protection:
Recommend wearing protective gloves (e.g. rubber gloves).

Eye protection:
Wear safety glasses when liquid may splash.

Respiratory Protection:
Use an approved respirator if exposure limits are exceeded or if irritation or other symptoms occur.

Body Protection:
Recommend wearing general working clothing.
 Page 5 of 18
Issuing date: January 10, 2021

General protective and hygienic measures:

Keep away from foodstuffs, beverages and feed.
Wash hands before breaks and at the end of work.
Avoid contact with eyes and broken skin.
8.2.3 Environmental exposure controls:
Maintain levels below Community environmental protection thresholds.

9. Physical and chemical properties

9.1. Information on basic physical and chemical properties
General Information
Physical state
Liquid
Colour
White
Particle characteristics
Not applicable

Odour very slight epoxy odor

Odour threshold No data available

pH No data available

Melting point/freezing point No data available

Initial boiling point and boiling range ＞200℃（392ºF）ºF（at 760mm Hg）

Flash point ＞93℃（199ºF）

Evaporation rate No data available

Flammability (solid, gas) Non-flammable

Flammable/Explosive Limits-Lower Vol % No data available

Flammable/Explosive Limits-Upper Vol % No data available

Vapour pressure ≤ 27 psia [@ 131 ºF]

Vapour density ＞1.0

Density（20℃） 1.3±0.1 g/cm3

Kinematic viscosity（mm2/s） 30769-46154

Solubility (water) No data available

Partition coefficient: n-octanol/water No data available

Auto-ignition temperature No data available

Decomposition temperature No data available

Explosive properties No data available

Oxidizing properties No data available

9.2 Other information: Not available.

 Page 6 of 18
Issuing date: January 10, 2021

10. Stability and reactivity

10.1. Reactivity: This product is stable under normal ambient and anticipated storage and handling conditions of
temperature and pressure.
10.2. Chemical stability: No information available.
10.3. Possibility of hazardous reactions: The product is not flammable, and has no special danger.
10.4. Conditions to avoid: Long-time direct sunlight and high temperature.
10.5. Incompatible materials: No information available.
10.6. Hazardous decomposition products: It may release smoke, carbon monoxide, carbon dioxide and other
hazardous gas from thermal decomposition.

11. Toxicological information

11.1. Information on toxicological effects:
Acute toxicity: No classification for this product.

Skin corrosion/irritation: Causes skin irritation.

Serious eye damage/eye irritation: Causes serious eye irritation.

Respiratory sensitizer: No sensitization responses were observed.

Skin sensitizer: No sensitization responses were observed.

Germ cell mutagenicity: No classification for this product.

Carcinogenicity: No classification for this product.

Reproductive Toxicity: No classification for this product.

Specific target organ toxicity, single exposure: May cause respiratory irritation.

Specific target organ toxicity, repeated exposure: No classification for this product.

Aspiration hazard: No classification for this product.

Effects on or via lactation: No classification for this product.

11.2. Endocrine disruptor information: The mixture does not contain endocrine disruptors.
 Page 7 of 18
Issuing date: January 10, 2021

12. Ecological information

12.1. Toxicity: No data available for the whole product.
12.2. Persistence and Degradability: No data available for the whole product.
12.3. Bioaccumulative Potential: No data available for the whole product.
12.4 Mobility in Soil: No information available.
12.5 Results of PBT and vPvB Assessment: No information available.
12.6 Endocrine disruptor information: The mixture does not contain endocrine disruptors.
12.7 Additional information: No information available.

13. Disposal considerations

13.1. Waste treatment methods
13.1.1. Product / Packaging disposal:
It is recommended to use incineration method to dispose of waste.
After contents are completely removed, dispose of its container at hazardous or special waste collection point.
Waste codes / waste designations according to LoW
EWC code: 20 01 28
In other countries different conditions might be valid. All national and local laws have to be considered.
13.1.2. Waste treatment-relevant information:
Paste a label on the container indicating the possible hazards of the waste.
13.1.3. Sewage disposal-relevant information:
Do not discharge waste into sewage without any treatment.
13.1.4. Other disposal recommendations: Any disposal practice must be in compliance with country, local, state,
and federal laws and regulations.

14. Transport Information

ADR and RID / Air-Transportation- IATA/ICAO/Sea-Transportation-IMO/IMDG.:
14.1. UN number or ID number: Not applicable.
14.2. UN proper shipping name: Not regulated.
14.3. Transport hazard class (es): Not applicable.
14.4. Packing group: Not applicable.
14.5. Assigned Pictogram: Not applicable.
14.6. Environmental hazards (Marine Pollutant (Yes/No)): No.
14.7. EMS NO.: Not applicable
14.8. Special precautions for user: Check whether the package is completed or sealed before transporting;
make sure no damage of packages and prevent goods from falling down during transporting; the transport vehicle
should be equipped with facilities for fire-fighting and accidental release handling; do NOT transport this product
together with incompatible substances; stay away from fire and areas of high temperature during stopovers.
14.9. Transport in bulk according to Annex II of MARPOL and the IBC Code: Not applicable.
 Page 8 of 18
Issuing date: January 10, 2021

15.Regulatory information

15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture:

Candidate List of Substances of very high concern (SVHC) according to ECHA: Not listed.

REACH Regulation Annex XVII Regulation List: Not listed.

REACH Regulation Annex XIV Authorization List: Not listed.

Germany – WGK: Not classified.

15.2. Chemical Safety Assessment: A Chemical Safety Assessment has not been carried out.

Other relevant regulations:

Sara:

Section 355 (extremely hazardous substances): Not listed.

SARA 313: Not listed.

Toxic Substances Control Act (TSCA):

Ingredient (s) CAS No. TSCA Inventory

Epoxy resin 25068-38-6 Listed
Barium sulphate 13462-86-7 Listed
Calcuim carbonate 1317-65-3 Listed
Ferric oxide 1309-37-1 Listed

Clean Water Act:

Chemical Name CWA - Reportable CWA - Toxic CWA - Priority CWA –
Quantities Pollutants Pollutants Hazardous
Substances
Not applicable Not applicable Not listed Not listed Not listed

Carcinogenicity categories: Not listed by ACGIH, IARC and NTP.

 Page 9 of 18
Issuing date: January 10, 2021

16. Other information

DISCLAIMER:
All the information of this SDS is true and effective, and only for reference. Our company will not control
the way how people use it, neither will we be responsible for any consequence. The users shall decide
how to properly use the product or adopt certain production way for some special purpose. The above-
mentioned precautionary measures are helpful to avoid damage to the property or life safety during the
operation or use of this product.

References:
EC No.1907/2006 (REACH)
EC No. 1272/2008 (CLP)
Commission Regulation (EU) 2015/830

For full text of Hazard- and EU Hazard-statements:

Not applicable. Not applicable.
Classification and procedure used to derive the classification for mixtures according to Regulation (EC)
1272/2008 [CLP]:
Classification according to Regulation (EC) Nr.
Classification procedure
1272/2008
Not applicable. Not applicable.

Full description of some acronyms:

CAS-Chemical Abstracts Service

EINECS-European Inventory of Existing Commercial Chemical Substances
IMO-International Maritime Organization
IMDG-International Maritime Dangerous Goods
IATA-International Air Transport Association
ICAO-International Civil Aviation Organization
TSCA-Toxic Substances Control Act
OSHA-Occupational Safety and Health Administration
ACGIH-American Conference of Governmental Industrial Hygienists

The Issuing date: January 10, 2021

SDS Version: 1
************************************The End************************************
 Page 10 of 18
Issuing date: January 10, 2021

Safety Data Sheet (SDS)

Prepared in accordance with Regulation (EC) No. 1907/2006 (REACH), Annex Ⅱ, as amended by
Commission Regulation (EU) 2020/878.

1、Identification of the substance/mixture and of the company/undertaking

1.1. Product identifier
Product name: Epoxy Part B
Product type：Hardener
1.2. Relevant identified uses of the substance or mixture and uses advised against:
For sealing and bonding.
1.3. Details of the supplier of the safety data sheet
Company: Zhejiang Guoneng Technology Co., Ltd.
Address: NO.1518 MENGXI ROAD, HUZHOU, ZHEJIANG, CHINA
TEL: 0086-572-2109399
FAX: 0086-572-2352225
Email: [email protected]
1.4. Emergency telephone number
Emergency telephone number: 0086-572-2109399
Intended use: It is used for sealing and bonding.
Further information: Zhejiang Guoneng Technology Co., Ltd.

2、Hazards identification
2.1. Classification of the substance or mixture:
2.1.1. Classification according to Regulation (EC) No 1272/2008 (CLP):
Acute Toxicity - Oral Category 4 - (H302) Acute Toxicity - Dermal Category 4 - (H312)
Acute Toxicity - Inhalation Category 4 - (H332) Skin Corrosion / Irritation Category 1A - (H314)
Serious Eye Damage / Eye Irritation Category 1 - (H318) Serious eye damage/eye irritation Category 2 - (H319)
Specific target organ toxicity - Single Category 3 - (H335) Toxic to aquatic life with long lasting effects-（H411 ）
2.1.2. Additional information: For full text of Hazard- and EU Hazard-statements: see SECTION 16.
2.2. Label elements
Labelling according to Regulation (EC) No 1272/2008 [CLP]: Not classified.
Hazard Pictograms:

Signal Word: Warning

Hazard Statements: H315 - Causes skin irritation.H317 - May cause an allergic skin reaction.
H319 - Causes serious eye irritation.H411 - Toxic to aquatic life with long lasting effects.
Precautionary Statements:P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several
minutes.Remove contact lenses, if present and easy to do. Continue rinsing.
P280 - Wear protective gloves/protective clothing/eye protection/face protection.
P302 + P352 - IF ON SKIN: Wash with plenty of soap and water.
P321 - Specific treatment (see supplemental first aid instructions on this label).
P271 - Use only outdoors or in a well-ventilated area.
P501 - Dispose of contents/ container to an approved waste disposal plant.
P332 + P313 - If skin irritation occurs: Get medical advice/attention.
Response Precautionary Statements:No special requirements.
Storage precautionary statements:No special requirements.
 Page 11 of 18
Issuing date: January 10, 2021

Disposal precautionary statements:No special requirements.

2.3. Other hazards:
This product does not contain any PBT or vPvB substances.
Spills can represent a risk of slipping due to the grain shape.
Information of endocrine disrupting substances:No endocrine disruptors.

3. Composition/information on ingredients
Product description: substance ( ); preparation/mixture (√)
Ingredients/ CAS No. EC No. Index No. % by Classification
Components weight according to
Regulation (EC) No
1278/2008
(CLP).
Poly[oxy(methyl-1,2-
ethanediyl)], .alpha.-hydro-
.omega.-hydroxy-, ether
with 2,2-
bis(hydroxymethyl)-1,3-
72244-98-5 615-735-8 Not available 20-35% Not available
propanediol (4:1), 2-
hydroxy-3-mercaptopropyl
ether
Calcium salt 10101-39-0 233-250-6 Not available 35-45% Not available
Calcium carbonate 471-34-1 207-439-9 Not available 15-25% Not available
Note: The mixture does not contain endocrine disruptors.

4、First aid measures

4.1. Description of first aid measures:
General notes: No information available.
Following inhalation: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Call a
POISON CENTER or doctor/physician if you feel unwell.
Following skin contact: Rinse skin with water [or shower]. If skin irritation occurs: Get medical advice/attention.
Following eye contact: Remove contact lenses if present and easy to do, continue rinsing. If eye irritation
persists: Get medical advice/attention.
Following ingestion: Rinse mouth. Do not induce vomiting without professional instruction. Call a POISON
CENTER or doctor/physician if you feel unwell.
Self-protection of the first aider: No special requirement.
4.2. Most important symptoms/effects, acute and delayed: Acute effect: Not found. Delayed effect: Not found.
4.3. Indication of any immediate medical attention and special treatment needed: Treat according to
symptoms.

5、Fire-fighting measures
5.1. Extinguishing Media
Suitable extinguishing media: Use water spray, dry chemicals, carbon dioxide, foam, dry sand for extinction.
Unsuitable Extinguishing Media: High volume water jet. Discharging cylinder shape water from fire hose
may lead to spread fire to the surroundings.
5.2. Special hazards arising from the substance or mixture: The product is not flammable, and has no special
danger.
Hazardous combustion products: It may release smoke, carbon monoxide, carbon dioxide and other
hazardous gas from thermal decomposition.
 Page 12 of 18
Issuing date: January 10, 2021

5.3. Advice for fire-fighters:

For initial fire, use dry powder, carbon dioxide, etc.
For large fire, it is effective to use fire foam, etc. to shut off air supply.
Fire-fighters must wear self-contained breathing apparatus and full protective equipment (e.g. fire-retardant
clothing).
Deny unnecessary entry to the place around the fire.
Remove containers from fire area if it can be done without risk.
Cool surrounding facilities, etc. with water spray.
Extinguish fire from upwind, and the fire extinguishing method should be appropriate to the situation in the
surroundings.

7. Accidental release measures

6.1. Personal precautions, protective equipment and emergency procedures: Use proper personal protective
equipment as indicated in Section 8.
6.2. Environmental Precautions: Keep cleaning run-offs out of municipal sewers and open bodies of water.
Comply with local and national laws and regulations.
6.3. Methods and materials for containment and cleaning up:
Small Spill:
Mop up or absorb with an inert dry material (e.g. sand, dry lime) and place in an appropriately labeled waste
disposal container.
Large Spill:
Isolate contaminated area and set up a warning board. The persons handling emergency are recommended
wearing protective clothing. Do NOT touch spilled material. Keep away from heat and sources of ignition.
Build up dike or dig pit for collection. Spray fog water to cool down and dilute vapor. Dilute the spilled liquid till it
is not combustible. Protect the working staff. Collect the spilled material with explosion-proof pump into an
appropriate container and transport the waste to the disposal place.
6.4. Reference to other sections:
For more information, please refer to Section 8 and Section 13.

8. Handling and storage

7.1. Precautions for safe handing:
Wash hands thoroughly after handling.
7.2. Conditions for safe storage, including any in compatibilities
Technical measures and storage conditions: Store it in a well-ventilated, cool and dry store room. Long-time
direct sunlight and high temperature. Keep out of the reach of children.
Incompatible materials: No information available.
Packaging materials: Aluminum plastic pipe or plastic pipe.
Requirements for storage rooms and vessels: Well-ventilated and dry.
Storage class
 Page 13 of 18
Issuing date: January 10, 2021

Further information on storage conditions: The storeroom should be equipped with proper facilities for
accidental fire.
7.3. Specific end use(s): It is used for sealing and bonding.

12. Exposure controls/personal protection

8.1. Control parameters:
Ingredients COSHH Workplace OSHA PEL-TWA ACGIH TLV-TWA
exposure limits-TWA
No ingredients have an exposure limit Not available Not available Not available

8.2. Exposure controls:

8.2.1. Appropriate engineering controls
Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below
recommended exposure limits. Install washer eyes and safety showers near to the handling and storage area.
8.2.2. Personal protection equipment:
Hand protection:
Recommend wearing protective gloves (e.g. rubber gloves).

Eye protection:
Wear safety glasses when liquid may splash.

Respiratory Protection:
Use an approved respirator if exposure limits are exceeded or if irritation or other symptoms occur.

Body Protection:
Recommend wearing general working clothing.
 Page 14 of 18
Issuing date: January 10, 2021

General protective and hygienic measures:

Keep away from foodstuffs, beverages and feed.
Wash hands before breaks and at the end of work.
Avoid contact with eyes and broken skin.
8.2.3 Environmental exposure controls:
Maintain levels below Community environmental protection thresholds.

13. Physical and chemical properties

9.1. Information on basic physical and chemical properties
General Information
Physical state
Liquid
Colour
Balck
Particle characteristics
Not applicable

Odour very slight epoxy odor

Odour threshold No data available

pH No data available

Melting point/freezing point No data available

Initial boiling point and boiling range ＞193℃（379ºF）ºF（at 760mm Hg）

Flash point ＞80℃（176ºF）

Evaporation rate No data available

Flammability (solid, gas) Non-flammable

Flammable/Explosive Limits-Lower Vol % No data available

Flammable/Explosive Limits-Upper Vol % No data available

Vapour pressure ≤27 psia [@ 131 ºF]

Vapour density ＞1.0

Density（20℃） 1.5±0.1 g/cm3

Kinematic viscosity（mm2/s） 33333-53333

Solubility (water) No data available

Partition coefficient: n-octanol/water No data available

Auto-ignition temperature No data available

Decomposition temperature No data available

Explosive properties No data available

Oxidizing properties No data available

9.2 Other information: Not available.

 Page 15 of 18
Issuing date: January 10, 2021

10.Stability and reactivity

10.1. Reactivity: This product is stable under normal ambient and anticipated storage and handling conditions of
temperature and pressure.
10.2. Chemical stability: No information available.
10.3. Possibility of hazardous reactions: The product is not flammable, and has no special danger.
10.4. Conditions to avoid: Long-time direct sunlight and high temperature.
10.5. Incompatible materials: No information available.
10.6. Hazardous decomposition products: It may release smoke, carbon monoxide, carbon dioxide and other
hazardous gas from thermal decomposition.

11. Toxicological information

11.1. Information on toxicological effects:
Acute toxicity: No classification for this product.

Skin corrosion/irritation: Causes skin irritation.

Serious eye damage/eye irritation: Causes serious eye irritation.

Respiratory sensitizer: No sensitization responses were observed.

Skin sensitizer: No sensitization responses were observed.

Germ cell mutagenicity: No classification for this product.

Carcinogenicity: No classification for this product.

Reproductive Toxicity: No classification for this product.

Specific target organ toxicity, single exposure: May cause respiratory irritation.

Specific target organ toxicity, repeated exposure: No classification for this product.

Aspiration hazard: No classification for this product.

Effects on or via lactation: No classification for this product.

11.2. Endocrine disruptor information: The mixture does not contain endocrine disruptors.
 Page 16 of 18
Issuing date: January 10, 2021

12.Ecological information
12.1. Toxicity: No data available for the whole product.
12.2. Persistence and Degradability: No data available for the whole product.
12.3 Bioaccumulative Potential: No data available for the whole product.
12.4 Mobility in Soil: No information available.
12.5 Results of PBT and vPvB Assessment: No information available.
12.6 Endocrine disruptor information: The mixture does not contain endocrine disruptors.
12.7 Additional information: No information available.

13.Disposal considerations
13.1 Waste treatment methods
13.1.1. Product / Packaging disposal:
It is recommended to use incineration method to dispose of waste.
After contents are completely removed, dispose of its container at hazardous or special waste collection point.
Waste codes / waste designations according to LoW
EWC code: 20 01 28
In other countries different conditions might be valid. All national and local laws have to be considered.
13.1.2. Waste treatment-relevant information:
Paste a label on the container indicating the possible hazards of the waste.
13.1.3. Sewage disposal-relevant information:
Do not discharge waste into sewage without any treatment.
13.1.4. Other disposal recommendations: Any disposal practice must be in compliance with country, local, state,
and federal laws and regulations.

14.Transport Information
ADR and RID / Air-Transportation- IATA/ICAO/Sea-Transportation-IMO/IMDG.:
14.1. UN number or ID number: Not applicable.
14.2. UN proper shipping name: Not regulated.
14.3. Transport hazard class (es): Not applicable.
14.4. Packing group: Not applicable.
14.5. Assigned Pictogram: Not applicable.
14.6. Environmental hazards (Marine Pollutant (Yes/No)): No.
14.7. EMS NO.: Not applicable
14.8. Special precautions for user: Check whether the package is completed or sealed before transporting;
make sure no damage of packages and prevent goods from falling down during transporting; the transport vehicle
should be equipped with facilities for fire-fighting and accidental release handling; do NOT transport this product
together with incompatible substances; stay away from fire and areas of high temperature during stopovers.
14.9. Transport in bulk according to Annex II of MARPOL and the IBC Code: Not applicable.
 Page 17 of 18
Issuing date: January 10, 2021

15.Regulatory information
15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture:

Candidate List of Substances of very high concern (SVHC) according to ECHA: Not listed. REACH

Regulation Annex XVII Regulation List: Not listed.

REACH Regulation Annex XIV Authorization List: Not listed.

Germany – WGK: Not classified.

15.2. Chemical Safety Assessment: A Chemical Safety Assessment has not been carried out.

Other relevant regulations:

Sara:

Section 355 (extremely hazardous substances): Not listed.

SARA 313: Not listed.

Toxic Substances Control Act (TSCA):

Ingredient (s) CAS No. TSCA Inventory

Poly[oxy(methyl-1,2-ethanediyl)], .alpha.-
hydro-.omega.-hydroxy-, ether with 2,2-
bis(hydroxymethyl)-1,3-propanediol (4:1), 2-
72244-98-5 Listed
hydroxy-3-mercaptopropyl ether
Calcium salt 10101-39-0 Listed
Calcium carbonate 471-34-1 Listed

Clean Water Act:

Chemical Name CWA - Reportable CWA - Toxic CWA - Priority CWA –
Quantities Pollutants Pollutants Hazardous
Substances
Not applicable Not applicable Not listed Not listed Not listed

Carcinogenicity categories: Not listed by ACGIH, IARC and NTP.

 Page 18 of 18
Issuing date: January 10, 2021

16.Other information
DISCLAIMER:
All the information of this SDS is true and effective, and only for reference. Our company will not control
the way how people use it, neither will we be responsible for any consequence. The users shall decide
how to properly use the product or adopt certain production way for some special purpose. The above-
mentioned precautionary measures are helpful to avoid damage to the property or life safety during the
operation or use of this product.

References:
EC No.1907/2006 (REACH)
EC No. 1272/2008 (CLP)
Commission Regulation (EU) 2015/830

For full text of Hazard- and EU Hazard-statements:

Not applicable. Not applicable.
Classification and procedure used to derive the classification for mixtures according to Regulation (EC)
1272/2008 [CLP]:
Classification according to Regulation (EC) Nr.
Classification procedure
1272/2008
Not applicable. Not applicable.

Full description of some acronyms:

CAS-Chemical Abstracts Service

EINECS-European Inventory of Existing Commercial Chemical Substances
IMO-International Maritime Organization
IMDG-International Maritime Dangerous Goods
IATA-International Air Transport Association
ICAO-International Civil Aviation Organization
TSCA-Toxic Substances Control Act
OSHA-Occupational Safety and Health Administration
ACGIH-American Conference of Governmental Industrial Hygienists

The Issuing date: January 10, 2021

SDS Version: 1

************************************The End************************************