[ 0.

000000] Booting Linux on physical CPU 0x0

[ 0.000000] Linux version 3.14.0-xilinx-g16220c3 (lzq@armdev2) (gcc version
4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #83 SMP PREEMPT
Thu Jul 12 11:42:53 CST 2018
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction
cache
[ 0.000000] Machine model: Xilinx Zynq
[ 0.000000] cma: CMA: reserved 128 MiB at 27800000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 258048
[ 0.000000] free_area_init_node: node 0, pgdat c074ac00, node_mem_map e6fd8000
[ 0.000000] Normal zone: 1520 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 194560 pages, LIFO batch:31
[ 0.000000] HighMem zone: 496 pages used for memmap
[ 0.000000] HighMem zone: 63488 pages, LIFO batch:15
[ 0.000000] PERCPU: Embedded 8 pages/cpu @e6fc0000 s9088 r8192 d15488 u32768
[ 0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages:
256528
[ 0.000000] Kernel command line: noinitrd mem=1008M console=ttyPS0,115200
root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 884108K/1032192K available (5057K kernel code, 284K rwdata,
1928K rodata, 204K init, 258K bss, 148084K reserved, 253952K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc06da8ac (6987 kB)
[ 0.000000] .init : 0xc06db000 - 0xc070e380 ( 205 kB)
[ 0.000000] .data : 0xc0710000 - 0xc0757138 ( 285 kB)
[ 0.000000] .bss : 0xc0757144 - 0xc0797bfc ( 259 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] ps7-slcr mapped to f0004000
[ 0.000000] zynq_clock_init: clkc starts at f0004100
[ 0.000000] Zynq clock init
[ 0.000015] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every
3298534883328ns
[ 0.000293] ps7-ttc #0 at f0006000, irq=43
[ 0.000594] Console: colour dummy device 80x30
[ 0.000630] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[ 0.040198] pid_max: default: 32768 minimum: 301
[ 0.040408] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.040431] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.042575] CPU: Testing write buffer coherency: ok
[ 0.042901] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.042957] Setting up static identity map for 0x4cb118 - 0x4cb170
[ 0.043177] L310 cache controller enabled
[ 0.043197] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size:
512 kB
[ 0.120990] CPU1: Booted secondary processor
[ 0.210221] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.210349] Brought up 2 CPUs
[ 0.210368] SMP: Total of 2 processors activated.
[ 0.210376] CPU: All CPU(s) started in SVC mode.
[ 0.211036] devtmpfs: initialized
[ 0.213460] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9
rev 4
[ 0.214647] regulator-dummy: no parameters
[ 0.221522] NET: Registered protocol family 16
[ 0.223739] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.225988] cpuidle: using governor ladder
[ 0.226001] cpuidle: using governor menu
[ 0.233362] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff]
registered
[ 0.234868] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint
registers.
[ 0.234882] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.234991] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xf0080000
[ 0.256627] bio: create slab <bio-0> at 0
[ 0.258012] vgaarb: loaded
[ 0.258713] SCSI subsystem initialized
[ 0.259594] usbcore: registered new interface driver usbfs
[ 0.259767] usbcore: registered new interface driver hub
[ 0.259999] usbcore: registered new device driver usb
[ 0.260670] media: Linux media interface: v0.10
[ 0.260825] Linux video capture interface: v2.00
[ 0.261210] pps_core: LinuxPPS API ver. 1 registered
[ 0.261223] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
<[email protected]>
[ 0.261351] PTP clock support registered
[ 0.261704] EDAC MC: Ver: 3.0.0
[ 0.262887] Advanced Linux Sound Architecture Driver Initialized.
[ 0.265600] DMA-API: preallocated 4096 debug entries
[ 0.265614] DMA-API: debugging enabled by kernel config
[ 0.265691] Switched to clocksource arm_global_timer
[ 0.286673] NET: Registered protocol family 2
[ 0.287326] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.287421] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.287579] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.287637] TCP: reno registered
[ 0.287654] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.287703] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.287957] NET: Registered protocol family 1
[ 0.288295] RPC: Registered named UNIX socket transport module.
[ 0.288307] RPC: Registered udp transport module.
[ 0.288316] RPC: Registered tcp transport module.
[ 0.288324] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.288336] PCI: CLS 0 bytes, default 64
[ 0.288761] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters
available
[ 0.290748] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.292101] bounce pool size: 64 pages
[ 0.292975] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.293178] msgmni has been set to 1486
[ 0.293931] io scheduler noop registered
[ 0.293944] io scheduler deadline registered
[ 0.293981] io scheduler cfq registered (default)
[ 0.307724] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[ 0.307745] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8
Num_Peri-4 Num_Events-16
[ 0.431251] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud =
3124999) is a xuartps
[ 1.003148] console [ttyPS0] enabled
[ 1.007402] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to f0068000
[ 1.014985] [drm] Initialized drm 1.1.0 20060810
[ 1.032053] brd: module loaded
[ 1.041510] loop: module loaded
[ 1.051083] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 1.056928] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 1.064652] libphy: XEMACPS mii bus: probed
[ 1.069105] ------------- phy_id = 0x3625e62
[ 1.073826] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq
54
[ 1.082631] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.089276] ehci-pci: EHCI PCI platform driver
[ 1.096679] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[ 1.103487] usbcore: registered new interface driver usb-storage
[ 1.110349] mousedev: PS/2 mouse device common for all mice
[ 1.116461] i2c /dev entries driver
[ 1.123339] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[ 1.128859] cpufreq_cpu0: failed to get cpu0 regulator: -19
[ 1.134727] Xilinx Zynq CpuIdle Driver started
[ 1.139597] sdhci: Secure Digital Host Controller Interface driver
[ 1.145723] sdhci: Copyright(c) Pierre Ossman
[ 1.150032] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.156860] mmc0: no vqmmc regulator found
[ 1.160877] mmc0: no vmmc regulator found
[ 1.205736] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio]
using ADMA
[ 1.214418] usbcore: registered new interface driver usbhid
[ 1.219925] usbhid: USB HID core driver
[ 1.224633] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[ 1.230931] nand: Micron MT29F2G08ABAEAWP
[ 1.234899] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[ 1.240841] Bad block table found at page 131008, version 0x01
[ 1.247067] Bad block table found at page 130944, version 0x01
[ 1.253115] 3 ofpart partitions found on MTD device pl353-nand
[ 1.258897] Creating 3 MTD partitions on "pl353-nand":
[ 1.263990] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[ 1.272023] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[ 1.279348] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[ 1.290064] TCP: cubic registered
[ 1.293299] NET: Registered protocol family 17
[ 1.298002] Registering SWP/SWPB emulation handler
[ 1.303920] regulator-dummy: disabling
[ 1.308228] UBI: attaching mtd1 to ubi0
[ 1.836101] UBI: scanning is finished
[ 1.847683] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[ 1.854738] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 1.861532] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 1.868210] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 1.875048] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[ 1.881058] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 1.888169] UBI: max/mean erase counter: 3/1, WL threshold: 4096, image sequence
number: 347537888
[ 1.897112] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for
bad PEB handling: 40
[ 1.906328] UBI: background thread "ubi_bgt0d" started, PID 1084
[ 1.906334] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.910226] ALSA device list:
[ 1.910230] No soundcards found.
[ 1.926630] UBIFS: background thread "ubifs_bgt0_0" started, PID 1086
[ 1.955873] UBIFS: recovery needed
[ 2.043912] UBIFS: recovery completed
[ 2.047593] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[ 2.053518] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes:
2048 bytes/2048 bytes
[ 2.062657] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size
9023488 bytes (8 MiB, 72 LEBs)
[ 2.072537] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 2.077576] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 6DB0ADD6-21CD-
4224-902F-9EE5F976D1A6, small LPT model
[ 2.089082] VFS: Mounted root (ubifs filesystem) on device 0:11.
[ 2.096508] devtmpfs: mounted
[ 2.099610] Freeing unused kernel memory: 204K (c06db000 - c070e000)
[ 2.941381] random: dd urandom read with 1 bits of entropy available
[ 3.325724]
[ 3.325724] bcm54xx_config_init
[ 3.935733]
[ 3.935733] bcm54xx_config_init
[ 6.936567] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[ 6.942653] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[ 21.733969] In axi fpga driver!
[ 21.737077] request_mem_region OK!
[ 21.740430] AXI fpga dev virtual address is 0xf0200000
[ 21.745533] *base_vir_addr = 0xc51e
[ 21.761083] In fpga mem driver!
[ 21.764151] request_mem_region OK!
[ 21.767799] fpga mem virtual address is 0xf3000000
[ 22.535710]
[ 22.535710] bcm54xx_config_init
[ 23.165738]
[ 23.165738] bcm54xx_config_init
[ 26.166559] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[ 26.172583] xemacps e000b000.ps7-ethernet: link up (100/FULL)
log_level = 4
This is XILINX board. Totalram: 1039753216
Detect 1GB control board of XILINX
mmap axi_fpga_addr = 0xb6fd2000
axi_fpga_addr data = 0xc51e
mmap fpga_mem_addr = 0xb5dcb000
forceFreq=-1 forceFlag=0
min work minertest[0]:912

DETECT HW version=0000c51e
miner ID : 81486c2e2c00885c
Miner Type = S9
AsicType = 1387
real AsicNum = 63
use critical mode to search freq...
get PLUG ON=0x00000080
Find hashboard on Chain[7]
Check chain[7] PIC fw version=0x03
read pic freq and badcore num...
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[7] has freq in PIC and will jump over...
Chain[7] has core num in PIC
Chain[7] ASIC[6] has core num=2
Chain[7] ASIC[8] has core num=3
Chain[7] ASIC[11] has core num=1
Chain[7] ASIC[15] has core num=1
Chain[7] ASIC[16] has core num=15
Chain[7] ASIC[26] has core num=15
Chain[7] ASIC[33] has core num=2
Chain[7] ASIC[40] has core num=1
Chain[7] ASIC[42] has core num=15
Chain[7] ASIC[48] has core num=1
Check chain[7] PIC fw version=0x03
get PIC voltage=6 on chain[7], value=940
chain[7] temp offset record: 62,0,0,0,0,0,35,28
chain[7] temp chip I2C addr=0x98
chain[7] has no middle temp, use special fix mode.
total_exist_chain_num = 1
CRC error counter=0
set command mode to VIL

--- check asic number

After Get ASIC NUM CRC error counter=0
set_baud=0
The min freq=700
set real timeout 52, need sleep=379392
After TEST CRC error counter=0
search freq for 1 times, completed chain = 1, total chain num = 1
single_board_frq_tuning enter
min_rate, des_rate, fix_volt:13800, 14000, 880
force_freq not set, don't need tuning
restart Miner chance num=2
waiting for receive_func to exit!
waiting for pic heart to exit!
bmminer not found= 1369 root 0:00 grep bmminer

bmminer not found, restart bmminer ...

This is user mode for mining
Detect 1GB control board of XILINX
Miner Type = S9
Miner compile time: Wed Dec 5 15:12:44 CST 2018 type: Antminer
S9set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
miner ID : 81486c2e2c00885c
set_reset_allhashboard = 0x0000ffff
Checking fans!get fan[3] speed=5760
get fan[3] speed=5760
get fan[3] speed=5760
get fan[4] speed=4920
get fan[3] speed=5760
get fan[4] speed=4920
get fan[3] speed=5760
get fan[4] speed=4920
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=2 : 2
Chain[J8] has backup chain_voltage=880
Check chain[7] PIC fw version=0x03
Chain[J8] orignal chain_voltage_pic=6 value=940
Chain[J8] will use backup chain_voltage_pic=880 [108]
Chain[J8] get working chain_voltage_pic=108
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
Chain[J8] has 0 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 0 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 0 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 0 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 0 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 0 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 0 asic
miner total rate=0GH/s fixed rate=0GH/s

Miner fix freq ...

max freq = 100
set baud=1
do heat board 8xPatten for 1 times
setStartTimePoint total_tv_start_sys=106 total_tv_end_sys=107
restartNum = 2 , auto-reinit enabled...
do read_temp_func once...
do check_asic_reg 0x08
Done check_asic_reg
set FAN speed according to: temp_highest=0 temp_top1[PWM_T]=0
temp_top1[TEMP_POS_LOCAL]=0 temp_change=0 fix_fan_steps=0
set full FAN speed...
FAN PWM: 100
read_temp_func Done!
CRC error counter=0