MMA4Z00-NS400-C

Mellanox® MMA4Z00-NS400 Compatible TAA 400GBase-SR4 PAM4 OSFP112 RHS Transceiver (MMF, 850nm,
50m, MPO, DOM, CMIS 5.0)

Features:
• OSFP MSA Compliant
• Compliant with IEEE 802.3db 400GBASE-SR4
• Bi-directional operation: 4x Tx, and 4x Rx at 106.25Gbps
with 53.125GBd PAM4 modulation scheme
• Single MPO-12 Connector
• Commercial Temperature: 0 to 70 Celsius
• VCSEL Transmitter
• Built in DSP
• Hot Pluggable
• RoHS Compliant and Lead-Free

Applications:
• 400GBase Ethernet
• 1x Fibre Channel
• Access and Enterprise

Product Description
This Mellanox® MMA4Z00-NS400 compatible OSFP112 RHS transceiver provides 400GBase-SR4 throughput up
to 50m over multi-mode fiber (MMF) using a wavelength of 850nm via an MPO connector. It is guaranteed to
be 100% compatible with the equivalent Mellanox® transceiver. This easy to install, hot swappable transceiver
has been programmed, uniquely serialized and data-traffic and application tested to ensure that it will initialize
and perform identically. Digital optical monitoring (DOM) support is also present to allow access to real-time
operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality
of our products and proudly offer a limited lifetime warranty.

ProLabs’ transceivers are RoHS compliant and lead-free.

TAA refers to the Trade Agreements Act (19 U.S.C. & 2501-2581), which is intended to
foster fair and open international trade. TAA requires that the U.S. Government may
acquire only “U.S. – made or designated country end products.”
Rev. 021224
Absolute Maximum Ratings
Parameter Symbol Min. Typ. Max. Unit Notes

Power Supply Voltage Vcc -0.3 3.6 V

Storage Temperature Tstg -40 +85 o
C
Operating Case Temperature Tc 0 70 o
C 1
Relative Humidity (non-condensing) RH 5 85 %
Data rate DR 106.25 Gbps
ESD -1000 +1000 V High speed
-2000 +2000 V Others

Notes:
1. Exceeding the Absolute Maximum Ratings table may cause permanent damage to the device. This is just
an emphasized rating and does not involve the functional operation of the device that exceeds the
specifications of this technical specification under these or other conditions. Long-term operation under
Absolute Maximum Ratings will affect the reliability of the device.

Electrical Characteristics
Parameter Symbol / Min. Typ. Max. Unit Notes
Test Point
Power Supply Voltage Vcc 3.135 3.3 3.465 V
Transceiver Power Consumption TD 8.5 W
Transmitter Input Specifications

RX Signaling Rate TP1a GBd

Single-Ended Voltage Tolerance Range TP1a -0.4 3.3 V
DC Common-Mode Voltage TP1a -0.3 2.8 V
AC Common Mode Output Voltage (rms) TP1a 32 (LF) mV
80 (Full Band)
Eye Height TP1a 10 mV
Vertical Eye Closure (VEC) 12 dB
Effective Return Loss 7.3 dB
Differential Pk-Pk Input Voltage 35 750 mV
Rx Differential Termination Mismatch TP1 10 %
Receiver Output Specifications

AC Common Mode Output Voltage (rms) TP4 32 (LF) mV

80 (Full Band)
Differential Pk-Pk Output Voltage TP4 600 (short mode) mV
845 (long mode)
Eye Height, Differential TP4 15 mV
Effective Return Loss, ERL TP4 8.5 dB
Differential Termination Mismatch TP4 10 %
 Transition Time (min, 20% to 80%) TP4 8.5 ps
DC Common Mode Voltage TP4 -350 2850 mV

Optical Characteristics
Parameter Symbol Min. Typ. Max. Unit Notes

Transmitter (@TP2 Test Point)

Tx Optical Power TxP -4.6 4 dBm

Extinction Ratio ER 2.5 dB
Outer Optical Modulation POMA -2.6dBm max (TECQ, 3.5 dBm
Amplitude TDECQ) <1.8dB
(OMAouter)
-4.4dBm + max (TECQ,
TDECQ) 1.8<max
(TECQ,TDE CQ)<=4.4dB
Average Launch Power of OFF Poff -30 dBm
Transmitter, each Lane
Wavelength Range λ 840 868 nm
Spectral Width RMS 0.6 nm
RIN12OMA RIN12OMA -132 dB/Hz
Optical Return Loss Tolerance ORL 14 dB
Transmitter and Dispersion Eye 4.4 dB
Closure for PAM4 (TDECQ)
Receiver (@TP3 Test Point)

Damage Threshold 5 dBm 1

Average Receiver Power -6.4 4 dBm
Average Receiver Power, each Lane OMAouter 3.5 dBm
Center Wavelength λ 840 868 nm
Receiver Reflectance -15 dB
Receiver Sensitivity (OMAouter) SEN Max (-4.6, dBm
@2^10-4 SECQ-6.4)
Stressed Receiver Sensitivity -2 dBm
(OMAouter)
SECQ 4.4 dB
OMAouter of each aggressor lane 3.5 dBm

Notes:
1. The receiver shall be able to tolerate, without damage, continuous exposure to an optical input signal
having this average power level on one lane. The receiver does not have to operate correctly at this
input power.
Pin Descriptions
Pin Logic Symbol Name/Description Plug Notes
Sequence
1 GND Module Ground. 1 1
2 CML-I Tx2+ Transmitter Non-Inverted Data. 3
3 CML-I Tx2- Transmitter Inverted Data. 3
4 GND Module Ground. 1 1
5 CML-I Tx4+ Transmitter Non-Inverted Data. 3
6 CML-I Tx4- Transmitter Inverted Data. 3
7 GND Module Ground. 1 1
8 CML-I Tx6+ Transmitter Non-Inverted Data. 3
9 CML-I Tx6- Transmitter Inverted Data. 3
10 GND Module Ground. 1 1
11 CML-I Tx8+ Transmitter Non-Inverted Data. 3
12 CML-I Tx8- Transmitter Inverted Data. 3
13 GND Module Ground. 1 1
14 LVCMOS-I/O SCL 2-Wire Serial Interface Clock. 3 2
15 Vcc +3.3V Power Supply. 2
16 Vcc +3.3V Power Supply. 2
17 Multi-Level LPWn/PRSn Low-Power Mode/Module Present. 3
18 GND Module Ground. 1 1
19 CML-O Rx7- Receiver Inverted Data. 3
20 CML-O Rx7+ Receiver Non-Inverted Data. 3
21 GND Module Ground. 1 1
22 CML-O Rx5- Receiver Inverted Data. 3
23 CML-O Rx5+ Receiver Non-Inverted Data. 3
24 GND Module Ground. 1 1
25 CML-O Rx3- Receiver Inverted Data. 3
26 CML-O Rx3+ Receiver Non-Inverted Data. 3
27 GND Module Ground. 1 1
28 CML-O Rx1- Receiver Inverted Data. 3
29 CML-O Rx1+ Receiver Non-Inverted Data. 3
30 GND Module Ground. 1 1
31 GND Module Ground. 1 1
32 CML-O Rx2+ Receiver Non-Inverted Data. 3
33 CML-O Rx2- Receiver Inverted Data. 3
34 GND Module Ground. 1 1
35 CML-O Rx4+ Receiver Non-Inverted Data. 3
 36 CML-O Rx4- Receiver Inverted Data. 3
37 GND Module Ground. 1 1
38 CML-O Rx6+ Receiver Non-Inverted Data. 3
39 CML-O Rx6- Receiver Inverted Data. 3
40 GND Module Ground. 1 1
41 CML-O Rx8+ Receiver Non-Inverted Data. 3
42 CML-O Rx8- Receiver Inverted Data. 3
43 GND Module Ground. 1 1
44 Multi-Level INT/RSTn Module Input/Module Reset. 3
45 Vcc +3.3V Power Supply. 2
46 Vcc +3.3V Power Supply. 2
47 LVCMOS-I/O SDA 2-Wire Serial Interface Data. 3 2
48 GND Module Ground. 1 1
49 CML-I Tx7- Transmitter Inverted Data. 3
50 CML-I Tx7+ Transmitter Non-Inverted Data. 3
51 GND Module Ground. 1 1
52 CML-I Tx5- Transmitter Inverted Data. 3
53 CML-I Tx5+ Transmitter Non-Inverted Data. 3
54 GND Module Ground. 1 1
55 CML-I Tx3- Transmitter Inverted Data. 3
56 CML-I Tx3+ Transmitter Non-Inverted Data. 3
57 GND Module Ground. 1 1
58 CML-I Tx1- Transmitter Inverted Data. 3
59 CML-I Tx1+ Transmitter Non-Inverted Data. 3
60 GND Module Ground. 1 1

Notes:
1. OSFP uses common ground (GND) for all signals and supply (power). All are common within the OSFP
module, and all module voltages are referenced to this potential unless otherwise noted.
2. Open-Drain with pull-up resistor on the host.
Electrical Pad Layout

Test Compliance Points

Reference link model and test compliance points used in product specifications are illustrated as follows.
Transceiver Block Diagram

Mechanical Specifications
About ProLabs
Our experience comes as standard; for over 15 years ProLabs has delivered optical connectivity solutions that
give our customers freedom and choice through our ability to provide seamless interoperability. At the heart
of our company is the ability to provide state-of-the-art optical transport and connectivity solutions that are
compatible with over 90 optical switching and transport platforms.

Complete Portfolio of Network Solutions

ProLabs is focused on innovations in optical transport and connectivity. The combination of our knowledge of
optics and networking equipment enables ProLabs to be your single source for optical transport and
connectivity solutions from 100Mb to 400G while providing innovative solutions that increase network
efficiency. We provide the optical connectivity expertise that is compatible with and enhances your switching
and transport equipment.

Trusted Partner
Customer service is our number one value. ProLabs has invested in people, labs and manufacturing capacity
to ensure that you get immediate answers to your questions and compatible product when needed. With
Engineering and Manufacturing offices in the U.K. and U.S. augmented by field offices throughout the U.S.,
U.K. and Asia, ProLabs is able to be our customers best advocate 24 hours a day.

Contact Information
ProLabs US
Email: sales@[Link]
Telephone: 952-852-0252

ProLabs UK
Email: salessupport@[Link]
Telephone: +44 1285 719 600