Usama Ali
MEEN -19111070
Assignment 01 (Part B)
Use the measuring tape to measure the dimensions in your house each for of the things
mentioned and fill the following table
Take all the dimensions in Metric system ( mm )
Observation No. Length Width Height Surface area (length x width)
Room NO.01 3124 2794 3048 8728456
Room No.02 4572 3657 3048 16719804
Main gate 3048 2133 127 6501384
Bed 2134 1828 432 3900952
Cupboard 762 508 508 387096
table 1220 915 762 1116300
Repeat the process for imperial systems
Take all the dimensions in Imperial system ( inches )
Please use fractions instead of decimals to records observation in inches
Observation No. Length Width Height Surface area (length x width)
Room NO.01 123 110 120 13530
Room No.02 180 144 120 25920
Main gate 120 84 5 10080
Bed 84 72 17 6048
Cupboard 30 20 20 600
table 48 36 30 1728
I have shared this format with CRs for both A and B section.
You have to submit this assignment to your CR.
Write your Registration number as name of the file.
CR will receive the assignments and make a zip file and mail me on following
mailing address before 10 am on 09th June, 2020.
[Link]@[Link]
Question no.1
Answer:
9,460,730,472,580,800 meters are in one light year.
Question no.2
Answer:
The velocity of the light is 300,000 km/[Link] light takes 1 minute and 21
seconds to reach the earth then the distance of the earth from the sun is given;
Velocity =displacement /time
Displacement=velocity *time
Displa cement=300000*81
Displacement=24300000 km
The distance of the earth from the sun is 24,300,000 or 2.43*10^7.
Question no.3
Answer:
275 acre has 0.69136 [Link] and 2074.10 [Link].
275 acre=0.429 [Link]
0.429 [Link]=(0.429)(0.609)[Link]
=[Link]
0.69136 [Link]=(0.69136)(1000)(3) [Link]
=2074.10 [Link].
Question no.4
Answer:
Volume of container=40*30*35
=42000 ft^3
Volume of o1 kg water=0.035 ft^3
Kg in the container=42000/0.035=1,200,000
1,200,000 kg of water can be accommodated in the container.
Question no.5
Answer:
If the zero of the vernier scale is on the right side to the zero of the main
scale then it is positive error and it should be subtracted from answer. If the zero
of the vernier scale is on the left side to the zero of the main scale then it is
negative error and it should be added to the answer.
In case of the screw gauge the error is positive when the zero of the
circular scale is below the reference line of the main scale. If the zero of the
circular scale is above the reference line of the main scale then the error is
negative and it is added to the answer.
