SAFETY DATA SHEET

KLEENMOLD 170
SDS # : 083071

Section 1. Identification
Product identifier : KLEENMOLD 170

Recommended use of the chemical and restrictions on use

Identified uses
Lubricants
Industrial applications
TOTAL
Supplier's details : TotalEnergies Marketing USA, Inc.
1201 Louisiana St. Suite 1800
Houston, TX 77002
Phone: 713-483-5000
See section 16 to have the contact details of the local supplier

Emergency telephone :
number
Asia-Pacific: +65 3158 1074
Middle-East: +44 1235 239671

Section 2. Hazard identification

Classification of the : SKIN CORROSION/IRRITATION - Category 3
substance or mixture

GHS label elements

Signal word : Warning
Hazard statements : H316 - Causes mild skin irritation.
Precautionary statements
Prevention : Not applicable.
Response : If skin irritation occurs: Get medical advice or attention.
Storage : Not applicable.
Disposal : Not applicable.

Other hazards which do not : Prolonged or repeated contact may dry skin and cause irritation.
result in classification

Section 3. Composition/information on ingredients

Substance/mixture : Mixture

Ingredient name % (w/w) Identifiers

sulfur ≤3 7704-34-9

calcium dioleate ≤3 142-17-6

Additional information : Mineral oil of petroleum origin. Product containing mineral oil with less than 3%
DMSO extract as measured by IP 346
There are no additional ingredients present which, within the current knowledge of the supplier and in the
concentrations applicable, are classified as hazardous to health or the environment and hence require
reporting in this section.

Date of revision : 2023/08/22 APMO ENGLISH Version : 1.01 1/11

 KLEENMOLD 170
SDS # : 083071

Occupational exposure limits, if available, are listed in Section 8.

Section 4. First aid measures

Description of necessary first aid measures
Eye contact : Immediately flush eyes with plenty of water, occasionally lifting the upper and lower
eyelids. Check for and remove any contact lenses. Continue to rinse for at least 10
minutes. Get medical attention.
Inhalation : Remove victim to fresh air and keep at rest in a position comfortable for breathing.
If not breathing, if breathing is irregular or if respiratory arrest occurs, provide
artificial respiration or oxygen by trained personnel. It may be dangerous to the
person providing aid to give mouth-to-mouth resuscitation. Get medical attention if
adverse health effects persist or are severe. If unconscious, place in recovery
position and get medical attention immediately. Maintain an open airway. Loosen
tight clothing such as a collar, tie, belt or waistband.
Skin contact : Wash skin thoroughly with soap and water or use recognized skin cleanser.
Remove contaminated clothing and shoes. Continue to rinse for at least 10 minutes.
Get medical attention if adverse health effects persist or are severe. Wash clothing
before reuse. Clean shoes thoroughly before reuse.
Ingestion : Wash out mouth with water. Remove dentures if any. If material has been
swallowed and the exposed person is conscious, give small quantities of water to
drink. Stop if the exposed person feels sick as vomiting may be dangerous. Do not
induce vomiting unless directed to do so by medical personnel. If vomiting occurs,
the head should be kept low so that vomit does not enter the lungs. Get medical
attention if adverse health effects persist or are severe. Never give anything by
mouth to an unconscious person. If unconscious, place in recovery position and get
medical attention immediately. Maintain an open airway. Loosen tight clothing such
as a collar, tie, belt or waistband.

Most important symptoms/effects, acute and delayed

Potential acute health effects
Eye contact : No known significant effects or critical hazards.
Inhalation : No known significant effects or critical hazards.
Skin contact : Causes mild skin irritation. Defatting to the skin.
Ingestion : No known significant effects or critical hazards.
Over-exposure signs/symptoms
Eye contact : Adverse symptoms may include the following:
pain or irritation
watering
redness
Inhalation : No specific data.
Skin contact : Adverse symptoms may include the following:
irritation
redness
dryness
cracking
Ingestion : No specific data.

Indication of immediate medical attention and special treatment needed, if necessary

Notes to physician : Treat symptomatically. Contact poison treatment specialist immediately if large
quantities have been ingested or inhaled.
Specific treatments : No specific treatment.
Protection of first-aiders : No action shall be taken involving any personal risk or without suitable training. It
may be dangerous to the person providing aid to give mouth-to-mouth resuscitation.
Date of revision : 2023/08/22 APMO ENGLISH Version : 1.01 2/11
 KLEENMOLD 170
SDS # : 083071

See toxicological information (Section 11)

Section 5. Fire-fighting measures

Extinguishing media
Suitable extinguishing : Use dry chemical, CO₂, water spray (fog) or foam.
media
Unsuitable extinguishing : Do not use water jet.
media

Specific hazards arising : No specific fire or explosion hazard.

from the chemical
Hazardous thermal : carbon monoxide
decomposition products carbon dioxide
Silicon Dioxide
sulfur oxides
Hydrogen sulfide
Mercaptans

Special protective actions : Promptly isolate the scene by removing all persons from the vicinity of the incident if
for fire-fighters there is a fire. No action shall be taken involving any personal risk or without
suitable training.
Special protective : Fire-fighters should wear appropriate protective equipment and self-contained
equipment for fire-fighters breathing apparatus (SCBA) with a full face-piece operated in positive pressure
mode.

Section 6. Accidental release measures

Personal precautions, protective equipment and emergency procedures
For non-emergency : No action shall be taken involving any personal risk or without suitable training.
personnel Evacuate surrounding areas. Keep unnecessary and unprotected personnel from
entering. Do not touch or walk through spilled material. Provide adequate
ventilation. Wear appropriate respirator when ventilation is inadequate. Put on
appropriate personal protective equipment.
For emergency responders : If specialized clothing is required to deal with the spillage, take note of any
information in Section 8 on suitable and unsuitable materials. See also the
information in "For non-emergency personnel".

Environmental precautions : Avoid dispersal of spilled material and runoff and contact with soil, waterways,
drains and sewers. Inform the relevant authorities if the product has caused
environmental pollution (sewers, waterways, soil or air).

Methods and materials for containment and cleaning up

Small spill : Move containers from spill area. Avoid dust generation. Using a vacuum with
HEPA filter will reduce dust dispersal. Place spilled material in a designated,
labeled waste container. Dispose of via a licensed waste disposal contractor.
Large spill : Move containers from spill area. Approach release from upwind. Prevent entry into
sewers, water courses, basements or confined areas. Avoid dust generation. Do
not dry sweep. Vacuum dust with equipment fitted with a HEPA filter and place in a
closed, labeled waste container. Dispose of via a licensed waste disposal
contractor. Note: see Section 1 for emergency contact information and Section 13
for waste disposal.

Date of revision : 2023/08/22 APMO ENGLISH Version : 1.01 3/11

 KLEENMOLD 170
SDS # : 083071

Section 7. Handling and storage

Precautions for safe handling
Protective measures : Put on appropriate personal protective equipment (see Section 8). Do not ingest.
Avoid contact with eyes, skin and clothing. Keep in the original container or an
approved alternative made from a compatible material, kept tightly closed when not
in use. Empty containers retain product residue and can be hazardous. Do not
reuse container.
Advice on general : Eating, drinking and smoking should be prohibited in areas where this material is
occupational hygiene handled, stored and processed. Workers should wash hands and face before
eating, drinking and smoking. Remove contaminated clothing and protective
equipment before entering eating areas. See also Section 8 for additional
information on hygiene measures.

Conditions for safe storage, : Store in accordance with local regulations. Store in original container protected
including any from direct sunlight in a dry, cool and well-ventilated area, away from incompatible
incompatibilities materials (see Section 10) and food and drink. Keep container tightly closed and
sealed until ready for use. Containers that have been opened must be carefully
resealed and kept upright to prevent leakage. Do not store in unlabeled containers.
Use appropriate containment to avoid environmental contamination. See Section 10
for incompatible materials before handling or use.

Section 8. Exposure controls/personal protection

Control parameters
Occupational exposure limits UN
None.
Biological exposure indices UN
No exposure indices known.
Occupational exposure limits Hong Kong
Product/substance Exposure limit values
Distillates (petroleum), hydrotreated heavy Labour Department, OS&H Branch (Hong Kong, 4/2002). [Oil
naphthenic mist, mineral]
STEL: 10 mg/m³ 15 minutes.
TWA: 5 mg/m³ 8 hours.
Synthetic graphite GBZ 2.1 (China, 8/2019).
PC-TWA: 2 mg/m³ 8 hours. Form: respirable dust
PC-TWA: 4 mg/m³ 8 hours. Form: total dust
Biological exposure indices Hong Kong
No exposure indices known.
Occupational exposure limits India
Product/substance Exposure limit values
None.
Biological exposure indices India
No exposure indices known.

Appropriate engineering : Good general ventilation should be sufficient to control worker exposure to airborne
controls contaminants.

Date of revision : 2023/08/22 APMO ENGLISH Version : 1.01 4/11

 KLEENMOLD 170
SDS # : 083071

Environmental exposure : Emissions from ventilation or work process equipment should be checked to ensure
controls they comply with the requirements of environmental protection legislation. In some
cases, fume scrubbers, filters or engineering modifications to the process
equipment will be necessary to reduce emissions to acceptable levels.
Advisory OEL : Mineral oil mist: USA: OSHA (PEL) TWA 5 mg/m3, NIOSH (REL) TWA 5 mg/m3,
STEL 10 mg/m3, ACGIH (TLV) TWA 5 mg/m3 (highly refined)

Individual protection measures

Hygiene measures : Wash hands, forearms and face thoroughly after handling chemical products, before
eating, smoking and using the lavatory and at the end of the working period.
Appropriate techniques should be used to remove potentially contaminated clothing.
Wash contaminated clothing before reusing. Ensure that eyewash stations and
safety showers are close to the workstation location.
Eye/face protection : Safety eyewear complying with an approved standard should be used when a risk
assessment indicates this is necessary to avoid exposure to liquid splashes, mists,
gases or dusts. If contact is possible, the following protection should be worn,
unless the assessment indicates a higher degree of protection: chemical splash
goggles.
Skin protection
Hand protection : Chemical-resistant, impervious gloves complying with an approved standard should
be worn at all times when handling chemical products if a risk assessment indicates
this is necessary. Considering the parameters specified by the glove manufacturer,
check during use that the gloves are still retaining their protective properties. It
should be noted that the time to breakthrough for any glove material may be
different for different glove manufacturers. In the case of mixtures, consisting of
several substances, the protection time of the gloves cannot be accurately
estimated.
Hydrocarbon-proof gloves
Fluorinated rubber
nitrile rubber
Please observe the instructions regarding permeability and breakthrough time which
are provided by the supplier of the gloves. Also take into consideration the specific
local conditions under which the product is used, such as the danger of cuts,
abrasion, and the contact time.
Body protection : Personal protective equipment for the body should be selected based on the task
being performed and the risks involved and should be approved by a specialist
before handling this product.
Respiratory protection : Ensure adequate ventilation and check that a safe, breathable atmosphere is
present before entry into confined spaces. In case of insufficient ventilation, wear
suitable respiratory equipment. The use of breathing apparatus must comply strictly
with the manufacturer's instructions and the regulations governing their choices and
uses.

Section 9. Physical and chemical properties and safety

characteristics
The conditions of measurement of all properties are at standard temperature (20°C / 68°F) and pressure (1013 hPa)
unless otherwise indicated
Appearance
Physical state : Solid. [Viscous paste]
Color : Black.
Odor : Petroleum distillates Characteristic.
Odor threshold : Not available.
pH : Not available.
Melting point/freezing point : Not available.
Date of revision : 2023/08/22 APMO ENGLISH Version : 1.01 5/11
 KLEENMOLD 170
SDS # : 083071

Boiling point : Not available.

Flash point : Open cup: ≥160°C (≥320°F) [Cleveland Open Cup (COC)]
Evaporation rate : <1 (butyl acetate = 1)
Flammability (solid, gas) : Not available.
Lower and upper explosive : Not applicable.
(flammable) limits
Vapor pressure : <0.02 kPa (<0.15 mm Hg)
Vapor density : >8 [Air = 1]
Relative density : 0.96
Density : 0.96 g/cm³
Solubility(ies) :
Media Result
water Not soluble

Miscible with water : No.

Partition coefficient: n- : Not applicable.

octanol/water
Auto-ignition temperature : Not applicable.
Decomposition temperature : Not available.
Viscosity : Kinematic (40°C (104°F)): Not applicable.
Flow time (ISO 2431) : Not available.
Particle characteristics
Median particle size : Not available.

Section 10. Stability and reactivity

Reactivity : No specific test data related to reactivity available for this product or its ingredients.

Chemical stability : Stable under recommended storage and handling conditions (see Section 7).

Possibility of hazardous : Under normal conditions of storage and use, hazardous reactions will not occur.
reactions

Conditions to avoid : No specific data.

Incompatible materials : Strong oxidizing agents

Hazardous decomposition : carbon monoxide

products carbon dioxide
Silicon Dioxide
sulfur oxides
Hydrogen sulfide
Mercaptans

Date of revision : 2023/08/22 APMO ENGLISH Version : 1.01 6/11

 KLEENMOLD 170
SDS # : 083071

Section 11. Toxicological information

Information on toxicological effects
Acute toxicity Not available.
Product/substance Result Species Dose Exposure Test
sulfur LC50 Inhalation Dusts Rat - Male, 5.43 mg/l 4 hours EPA OPP
and mists Female 81-3
LD50 Dermal Rat - Male, >2000 mg/kg - EPA OPP
Female 81-2
LD50 Oral Rat - Male, >2000 mg/kg - EPA OPP
Female 81-1
calcium dioleate LD50 Dermal Rat >2000 mg/kg - OECD 402
Read across
LD50 Oral Rat >2000 mg/kg - OECD 420
Read across
Conclusion/Summary : Based on available data, the classification criteria are not met.
Irritation/Corrosion Not available. Not available.
Skin : Based on available data, the classification criteria are met.
Eyes : Based on available data, the classification criteria are not met.
Respiratory : Based on available data, the classification criteria are not met.
Sensitization Not available. Not available.
Skin : Based on available data, the classification criteria are not met.
Respiratory : Based on available data, the classification criteria are not met.
Mutagenicity Not available. Not available.
Conclusion/Summary : Based on available data, the classification criteria are not met.
Carcinogenicity Not available.
Conclusion/Summary : Based on available data, the classification criteria are not met.
Reproductive toxicity Not available.
Conclusion/Summary : Based on available data, the classification criteria are not met.
Teratogenicity Not available.
Conclusion/Summary : Based on available data, the classification criteria are not met.
Specific target organ toxicity (single exposure)
Not available.
Conclusion/Summary : Based on available data, the classification criteria are not met.
Specific target organ toxicity (repeated exposure)
Not available.
Conclusion/Summary : Based on available data, the classification criteria are not met.
Aspiration hazard
Not available.
Conclusion/Summary : Based on available data, the classification criteria are not met.

Information on the likely : Not available.

routes of exposure
Potential acute health effects
Eye contact : No known significant effects or critical hazards.
Inhalation : No known significant effects or critical hazards.

Date of revision : 2023/08/22 APMO ENGLISH Version : 1.01 7/11

 KLEENMOLD 170
SDS # : 083071

Skin contact : Causes mild skin irritation. Defatting to the skin.

Ingestion : No known significant effects or critical hazards.

Symptoms related to the physical, chemical and toxicological characteristics

Eye contact : Adverse symptoms may include the following:
pain or irritation
watering
redness
Inhalation : No specific data.
Skin contact : Adverse symptoms may include the following:
irritation
redness
dryness
cracking
Ingestion : No specific data.

Delayed and immediate effects and also chronic effects from short and long term exposure
Short term exposure
Potential immediate : Not available.
effects
Potential delayed effects : Not available.
Long term exposure
Potential immediate : Not available.
effects
Potential delayed effects : Not available.
Potential chronic health effects
Not available.
General : Prolonged or repeated contact can defat the skin and lead to irritation, cracking and/
or dermatitis.
Carcinogenicity : No known significant effects or critical hazards.
Mutagenicity : No known significant effects or critical hazards.
Reproductive toxicity : No known significant effects or critical hazards.

Numerical measures of toxicity

Acute toxicity estimates
Product/substance Oral (mg/ Dermal Inhalation Inhalation Inhalation
kg) (mg/kg) (gases) (vapors) (dusts
(ppm) (mg/l) and mists)
(mg/l)
KLEENMOLD 170 163338.4 163338.4 N/A N/A N/A
sulfur N/A N/A N/A N/A 5.43
calcium dioleate 2500 2500 N/A N/A N/A

Other information :
Not available.

Date of revision : 2023/08/22 APMO ENGLISH Version : 1.01 8/11

 KLEENMOLD 170
SDS # : 083071

Section 12. Ecological information

Toxicity
Product/substance Result Species Exposure Test
sulfur Acute LC50 14 mg/l Fish 96 hours -
Acute LC50 >100 ppm Fish - Oncorhynchus 96 hours US EPA
Fresh water mykiss

Persistence and degradability

Not available.

Bioaccumulative potential
Product/substance LogKow BCF Potential
calcium dioleate 0.9 - Low

Mobility in soil
Soil/water partition : Not available.
coefficient (KOC)
Mobility in soil : Given its physical and chemical characteristics, the product has no soil mobility.
The product is insoluble and floats on water Loss by evaporation is limited

Other adverse effects : No known significant effects or critical hazards.

Section 13. Disposal considerations

Disposal methods : The generation of waste should be avoided or minimized wherever possible.
Disposal of this product, solutions and any by-products should at all times comply
with the requirements of environmental protection and waste disposal legislation and
any regional local authority requirements. Dispose of surplus and non-recyclable
products via a licensed waste disposal contractor. Waste should not be disposed of
untreated to the sewer unless fully compliant with the requirements of all authorities
with jurisdiction. Waste packaging should be recycled. Incineration or landfill
should only be considered when recycling is not feasible. This material and its
container must be disposed of in a safe way. Care should be taken when handling
emptied containers that have not been cleaned or rinsed out. Empty containers or
liners may retain some product residues. Avoid dispersal of spilled material and
runoff and contact with soil, waterways, drains and sewers.

Section 14. Transport information

ADR IMDG ICAO/IATA
UN/ID No Not regulated. Not regulated. Not regulated.

UN proper - - -
shipping name
Transport hazard - - -
class(es)

Packing group - - -

Date of revision : 2023/08/22 APMO ENGLISH Version : 1.01 9/11

 KLEENMOLD 170
SDS # : 083071

Environmental No. No. No.

hazards
ICAO/IATA

Special precautions for user : Transport within user’s premises: always transport in closed containers that are
upright and secure. Ensure that persons transporting the product know what to do in
the event of an accident or spillage.

Transport in bulk according : Not available.

to IMO instruments

Section 15. Regulatory information

International regulations
Chemical Weapon Convention List Schedules I, II & III Chemicals
Not listed.
Montreal Protocol
Not listed.
Stockholm Convention on Persistent Organic Pollutants
Not listed.
Rotterdam Convention on Prior Informed Consent (PIC)
Not listed.
UNECE Aarhus Protocol on POPs and Heavy Metals
Not listed.
Inventory list
Australia inventory (AIIC) : At least one component is not listed.
Canada inventory (DSL/NDSL) : Not determined.
China inventory (IECSC) : Not determined.
Europe inventory (EC) : All components are listed or exempted.
Japan inventory : Japan inventory (CSCL): Not determined.
Japan inventory (ISHL): Not determined.
New Zealand Inventory of Chemicals (NZIoC) : Not determined.
Philippines inventory (PICCS) : Not determined.
Korea inventory (KECI) : Not determined.
Taiwan Chemical Substances Inventory (TCSI) : Not determined.
Thailand inventory : Not determined.
Turkey inventory : Not determined.
United States inventory (TSCA 8b) : All components are listed or exempted.
Vietnam inventory : Not determined.
The information stated in this section relates solely to the conformity of the chemical product with the
countries Inventories. The information used to confirm the inventory status of this product may be based on
additional data to the chemical composition shown in Section 3. Other regulations may apply for importation
or marketing authorizations.

Date of revision : 2023/08/22 APMO ENGLISH Version : 1.01 10/11

 KLEENMOLD 170
SDS # : 083071

Section 16. Other information

History
Date of revision : 2023/08/22
previous revision date : 2023/03/24
Version : 1.01
Key to abbreviations : ATE = Acute Toxicity Estimate
BCF = Bioconcentration Factor
GHS = Globally Harmonized System of Classification and Labelling of Chemicals
IATA = International Air Transport Association
IBC = Intermediate Bulk Container
IMDG = International Maritime Dangerous Goods
LogPow = logarithm of the octanol/water partition coefficient
MARPOL = International Convention for the Prevention of Pollution From Ships,
1973 as modified by the Protocol of 1978. ("Marpol" = marine pollution)
N/A = Not available
SGG = Segregation Group
UN = United Nations
Procedure used to derive the classification
Classification Justification
SKIN CORROSION/IRRITATION - Category 3 Calculation method
Additional details on the supplier of the product
SAUDI TOTAL PETROLEUM PRODUCTS CO. TotalEnergies Marketing (FIJI) Pte Ltd TotalEnergies Marketing (Cambodia) Co., TOTAL JORDAN
LTD Rona Street, Walu Bay Ltd. Reem Center, 4th Floor
704, Zahran Business Center GPO Box 168 ANINA Building 6th Floor, No 240, St. 271, 244 Arar Street, Wadi Saqra
Sultan street - Tower A , 7th floor Suva - Fiji Islands B.P600, P.O. Box 831285, Amman 11183
PO Box 4861, Jeddah 21463 Tel: +679 3313 933 12351 Phnom Penh, Cambodia Jordan
K.S.A Fax: +679 330 2279 Tel: +855 23 218 630 Tel: +962 6 500 80 05
Tel: +966 12 22 56 300
Fax: +855 23 217 662 Fax: +962 6 500 80 08
Fax: +966 12 22 56 311

TotalEnergies Marketing Lebanon SAL TotalEnergies Marketing Middle East FZE TotalEnergies Marketing Asia-Pacific TotalEnergies Marketing India Private Limited
Rue Achrafieh, Imm. Tilal Bloc B, 2ème Office 3901, 39th Floor, Middle East Pte Ltd 3rd Floor, The Leela Galleria,
Etage Ubora Commerical Tower, McGregor Street Lot.19 Sec.8 Andheri - Kurla Road,
B.P. 11-3636 Beyrouth - Liban Business Bay, Al Abraj Street, Level 7, Deloitte Haus Andheri (East), Mumbai
Tel : + 961 1 21 22 50 PO Box 14871 PO BOX 1784, Port Moresby, NCD Maharashtra State,
Fax: + 961 1 21 21 33 Dubai, United Arab Emirates Papua New Guinea INDIA 400059
Tel: +91 22 6723 2500
Tel: +675 7999 6001
Fax: +91 22 6723 2600

TotalEnergies Marketing Pacifique TOTAL PARCO PAKISTAN LTD TotalEnergies Marketing Polynésie
Immeuble Le Centre 10 Tariq Block, New Garden Town Fare Ute
30 route de la Baie des Dames, Imm. Le Lahore 54700, Pakistan Papette
Centre, Ducos Tel: +92 42 111 709 709 Postal address: B.P. 64, 98713 Papeete
BP 717, 98845 Noumea Cedex Fax: +92 42 354 683 66 Tel: +689 40 48 50 50
Tel: +687 27 90 50 Fax: +689 40 48 05 03
Fax: +687 27 29 90

References : Not available.

Indicates information that has changed from previously issued version.
Notice to reader
To the best of our knowledge, the information contained herein is accurate. However, neither the above-
named supplier, nor any of its subsidiaries, assumes any liability whatsoever for the accuracy or
completeness of the information contained herein.
Final determination of suitability of any material is the sole responsibility of the user. All materials may
present unknown hazards and should be used with caution. Although certain hazards are described herein,
we cannot guarantee that these are the only hazards that exist.

Date of revision : 2023/08/22 APMO ENGLISH Version : 1.01 11/11