Relay valve RE 66152/10.
03
Replaces: 07.03
1/4
Type LT 09
Series 1X
Features Function
– Relay valves are used in vehicles with very long brake lines or The hydraulic relay valve is a direct operated proportional pressu-
very large brake cylinder volumes. re reducing valve of 3-way design with hydraulic pilot.
– The connection is directly at the axis which is to be decelerated. The relay valve consists mainly of the housing (1), control spool
(2), return spring (3) and bleed screw (4).
The valve is controlled via a hydraulic control pressure in port G.
Symbol This control pressure directly effects the control spool (2). Firstly
the control land closes at port T, afterwards the through flow
5 1 2 4 from SP to BR is released.
BR
The pressure which builds up in the brake line BR simultaneously
pushes via the pilot oil drilling (5) behind the control spool (2)
against the control pressure so that the brake pressure rises in
proportion to the control pressure. With the control pressure
G being held constant, the control spool (2) moves into the control
position and holds the value set in channel BR constant. When
the control pressure decreases the return spring closes via the
control spool (2) from SP to BR and opens BR to T, so that the
braking circuit is unloaded.
3 SP T
2/4 Bosch Rexroth AG Mobile Hydraulics LT 09 RE 66152/10.03
Technical Data (for applications outside these parameters, please consult us!)
Technical data Supply pressure, max. bar 200
Control pressure, max. bar 100
Operating brake pressure, max. bar 100
Pressure fluid Mineral oil (HL, HLP) to DIN 51 524
Pressure fluid temperature range °C –20 to +80
Viscosity range mm2/s 2.8 to 380
Degree of contaminationm (maximum permissible) to ISO 4406 (C) class 20/18/15
Weight kg 1.3 (LT 09 HG-1X/...); 4,6 (LT 09 HA-1X/...)
Notes on installation
– The cross-sections of the transfer elements (pipes, hoses) – Preferrably the accumulators should be installed near the
must be selected so that, with low operating temperatures, relay valve.
the pressure loss between hydraulic accumulator and bra-
king cylinder is kept to a minimum.
Unit dimensions (in mm)
Type: LT 09 HG-1X/125/02M 114 60
Material No.: R900375749 27 21,5
2
SP T
14
57
G
BR
57,5 18
39,5
1
14
Ø60
28
14
93 21
Output pressure BR in bar
100
1 Bleed screw
80
2 Name plate
60
40
Port d1 Ød2 t1 t2 Ød2
t2 min
20 G M14x1.5 21 1.5 12 d1
SP M16x1.5 23 1.5 12
t1
0 20 40 60 80 100 BR M16x1.5 23 1.5 12
Control pressure G in bar T M16x1.5 23 1.5 12
RE 66152/10.03 LT 09 Mobile Hydraulics Bosch Rexroth AG 3/4
Unit dimensions (in mm)
Type: LT 09 HA11-1X/150/02V SW7
7A/F 1 2
Material No.: R900563937
T SP G
62
(87)
37
BR
40
25
34 70 12,5
94
(164)
45
2 x Ø 10,2
5
Port d1 Ød2 t1 t2 Ød2
52
G M16x1.5 27 5 12 t2 min
d1
72 ±0,1
SP M22x1.5 34 5 14
t1
BR M27x2 – – 16
52
T M33x2 50 4 18
49 2
1 Bleed screw
2 Name plate
Output pressure BR in bar
100
80
60
40
20
0 20 40 60 80 100
Control pressure G in bar
4/4 Bosch Rexroth AG Mobile Hydraulics LT 09 RE 66152/10.03
Notes
Bosch Rexroth AG © 2003 by Bosch Rexroth AG, Mobile Hydraulics, 97813 Lohr am Main
Mobile Hydraulics All rights reserved. No part of this document may be reproduced or stored,
Zum Eisengießer 1 processed, duplicated or circulated using electronic systems, in any form or
97816 Lohr am Main, Germany by any means, without the prior written authorisation of Bosch Rexroth AG.
Telefon +49 (0) 93 52 / 18-0 In the event of contravention of the above provisions, the contravening party
Telefax +49 (0) 93 52 / 18-23 58 is obliged to pay compensation.
[email protected] The data specified above only serves to describe the product. No state-
www.boschrexroth.de ments concerning a certain condition or suitability for a certain application
can be derived from our information.The details stated do not release you
from the responsibility for carrying out your own assessment and verifi-
cation. It must be remembered that our products are subject to a natural
process of wear and ageing.
