Scribd
Upload
134 views1 page

25NB X Heavy

This document is a test certificate from APL Apollo Tubes Ltd. for steel tubes supplied to Ali Steel and Tubes Co. in Chennai, confirming compliance with IS 1239 (Part-I) 2004 in terms of chemical composition and mechanical properties. The certificate includes test results, dimensional characteristics, and confirms that the tubes have passed hydrostatic testing.

Uploaded by

Sarvanan Nb
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
134 views1 page

25NB X Heavy

This document is a test certificate from APL Apollo Tubes Ltd. for steel tubes supplied to Ali Steel and Tubes Co. in Chennai, confirming compliance with IS 1239 (Part-I) 2004 in terms of chemical composition and mechanical properties. The certificate includes test results, dimensional characteristics, and confirms that the tubes have passed hydrostatic testing.

Uploaded by

Sarvanan Nb
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

ANNEXURE - 1 IS 1239( Part-1) Format No:F/QA-18

(Para 5 of the Scheme of Testing and Inspection) Rev No:02


APL APOLLO TUBES LTD.,UNIT-II,HOSUR Issue Date:01/09/14
CML/3323544
Manufacturer of : ERW GALVANIZED & BLACK STEEL TUBES & PIPES & HOLLOW SECTIONS
No. 332-338,Alur, Perandapalli-Po,Hosur - 635109 ( TN) INDIA , Email : hosur@[Link] Website : [Link]
TEST CERTIFICATE FOR STEEL TUBES
M/S…ALI STEEL AND TUBES CO - CHENNAI Test certificate No. APL/QA..2024-25/8251
Certificate Date…02.03.2025
Invoice no…2402021785
We certify that material described below fully confirms to IS 1239 (Part-I) 2004 Chemical composition & Mechanical properties of the products tested in accordance with the scheme of testing and inspection contained
in BIS certification mark license No. CM/L 3323544 as indicate against each order No. etc
(Please refer to IS 1239 (Part-I) 2004 for detail of specification requirements)
TEST RESULTS
CHEMICAL COMPOSITION MECHANICAL PROPERTIES GALVANIZING

Tensile % Elongation Zinc coating Uniformity 5


LENGTH Cast No./Heat Batch No./Coil Quantity Mn% (Size ≤25mm Bend test/
Order No. SIZE NB. MM CLASS/TYPE C% max- S% max- P% max- Strength Mpa weight g/m² Dip
( MM ) No. No. (Mt/Pcs.) max- Min-12%& size Flattening REMARKS
0.20 0.040 0.040 (min-320 (Min - (1Dip/
1.30 ≥ 150mm Min test
Mpa) 20%) 360g/m²) Minute)

25mmNB BLK - HEAVY /PE 6000 D993225 25010842 4.200 0.062 0.30 0.006 0.016 382 32% PASS NA NA

80mmNB BLK -MEDIUM /PE 6000 I100518 25202131 2.980 0.070 0.37 0.015 0.022 378 33% PASS NA NA

This is to certify that dimensional characteristic (outside diameter / thickness / straightness / length / end condition) and workmanship confirms the requirement of IS : 1239 (Part-I) 2004
This is to certified that each tube have been hydrostatically tested as a leak tightness test at a pressure of 5 MPa for 3 seconds and found satisfactory

SHIPPING ADVICE NO : SIGNATURE OF AUTHORISED SIGNATORY


WAGON NO : DESIGNATION -SENIOR MANAGER

TRUCK NO…TN54B7788 For APL APOLLO TUBES LTD

1. Abbreviations : [Link] - Screwed tubes & socketed,pipe threads conforming to IS:554-1999 ,2. PE- Plain square cut ends [Link] - Beveled ends, 4. SWS - Screwed with caps threads conforming to IS 554- 1999.

You might also like