G-CURE™ 17-0807
Technical Datasheet
INTRODUCTION
G-CURE 17-0807 (formerly G-CURE 806PT60) acrylic resin is a hydroxyl functional acrylic copolymer designed to react at room temperature with aliphatic
polyisocyanates to produce high performance coatings. Coatings formulated with G-CURE 17-0807 exhibit outstanding durability, chemical resistance and
color retention. Coatings produced with G-CURE 17-0807 are suitable for metal, wood and plastic, particularly when heat sensitivity is a concern.
TYPE FORM OF DELIVERY (F.O.D)
Acrylic Polyol 60.0% non-volatile in PM acetate / toluene (65 / 35 pbw)
x
PRODUCT DATA PERFORMANCE HIGHLIGHTS
Non-Volatile, by wt: 60.0 ± 1.0 % · Excellent chemical resistance and color retention
· Highly weatherable, durable and flexible
Viscosity, Brookfiled (77° F) : 50 - 75 P
x
Hydroxyl value, on n.v. 85 - 95 SUGGESTED USES
(theoretical):
· Automotive refinish
Color: 100 maximum APHA
· Construction machinery, recreational and furniture coatings
Appearance : Clean, clear and free from · Industrial maintenance coatings
extraneous matter; may turn x
opaque when stored below 30ºF:
STORAGE
if this occurs, warm above 40ºF
until clear At temperatures up to 100°F storage stability packed in original
containers amounts for 3 years.
Density: 8.80 ± 0.10 lbs/gal
x
HEW on n.v.: 625
CURING WITH POLYISOCYANATES
Non-volatiles, by vol: 55.0%
Based on 100% conversion of reactive groups the following equation can
Flash Point: 45° F Setaflash be used to calculate the quantity of polyisocyanate needed for
crosslinking 100 parts (G-Cure 17-0807) (on solids):
Polyisocyanate = 42 x 100 x OH% (solid resin)
(f.o.d.) 17 x NCO% (f.o.d.)
42 = molecular weight of the NCO-group
17 = molecular weight of the OH-group
Anhydrous solvents as well as solvents free of hydroxyl functional
groups should be used in the presence of polyisocyanates, as
dilution solvents.
x
PRECAUTIONS
Before using G-CURE 17-0807, see the Safety Data Sheet (SDS) for
information on the identified hazards of the material and the
recommended personal protective equipment and procedures.
2.1 / 12.10.2022 (replaces all previous versions) Worldwide Contact Info: [Link] Page 1/2
Disclaimer: allnex Group companies ('allnex') exclude all liability with respect to the use made by anyone of the information contained herein. The information contained herein represents allnex's best
knowledge but does not constitute any express or implied guarantee or warranty as to the accuracy, the completeness or relevance of the data set out herein. Nothing contained herein shall be construed as
conferring any license or right under any patent or other intellectual property rights of allnex or of any third party. The information relating to the products is given for information purposes only. No guarantee
or warranty is provided that the product and/or information is suitable for any specific use, performance or result. Any unauthorized use of the product or information may infringe the intellectual property
rights of allnex, including its patent rights. The user should perform his/her own tests to determine the suitability for a particular purpose. The final choice of use of a product and/or information as well as the
investigation of any possible violation of intellectual property rights or misappropriation of trade secrets of allnex and/or third parties remain the sole responsibility of the user.
Notice: Trademarks indicated with ® , TM or * as well as the allnex name and logo are registered, unregistered or pending trademarks of Allnex Netherlands B.V. or its directly or indirectly affiliated allnex Group
companies. ©2022 allnex Group. All Rights Reserved.
G-CURE™ 17-0807
Technical Datasheet
STORAGE AND HANDLING
Care should be taken not to expose the product to high temperature
conditions, direct sunlight, ignition sources, oxidizing agents, alkalis or
acids. Storage and handling should be in stainless steel, amber glass,
amber polyethylene or baked phenolic lined containers. Wash
thoroughly after handling. Keep container tightly closed. Use with
adequate ventilation. See the SDS for the recommended storage
temperature range for G-CURE 17-0807.
version 2.1 Worldwide Contact Info: [Link] Page 2/2
Disclaimer: allnex Group companies ('allnex') exclude all liability with respect to the use made by anyone of the information contained herein. The information contained herein represents allnex's best
knowledge but does not constitute any express or implied guarantee or warranty as to the accuracy, the completeness or relevance of the data set out herein. Nothing contained herein shall be construed as
conferring any license or right under any patent or other intellectual property rights of allnex or of any third party. The information relating to the products is given for information purposes only. No guarantee
or warranty is provided that the product and/or information is suitable for any specific use, performance or result. Any unauthorized use of the product or information may infringe the intellectual property
rights of allnex, including its patent rights. The user should perform his/her own tests to determine the suitability for a particular purpose. The final choice of use of a product and/or information as well as the
investigation of any possible violation of intellectual property rights or misappropriation of trade secrets of allnex and/or third parties remain the sole responsibility of the user.
Notice: Trademarks indicated with ® , TM or * as well as the allnex name and logo are registered, unregistered or pending trademarks of Allnex Netherlands B.V. or its directly or indirectly affiliated allnex Group
companies. ©2019 allnex Group. All Rights Reserved.
