PROJECT TITLE [Max.
70 Character]
Project Report submitted in partial fulfillment of the
requirements for the award of the degree
of
BACHELOR OF TECHNOLOGY (HONS.)
by
NAME OF CANDIDATES
under the guidance
of
NAME OF SUPERVISOR
DEPARTMENT OF CIVIL ENGINEERING
NATIONAL INSTITUTE OF TECHNOLOGY,
JAMSHEDPUR
MAY 2020
NATIONAL INSTITUTE OF TECHNOLOGY
JAMSHEDPUR
CANDIDATE’S DECLARATION
We hereby declare that the work submitted in the project entitled “Project Title” in
partial fulfillment of the requirement for the award of degree of Bachelor of
Technology (Hons.) in the Department of Civil Engineering, National Institute of
Technology, Jamshedpur has been carried out under the supervision and guidance of
(write Supervisor name, Designation), Department of Civil Engineering, N. I. T.
Jamshedpur.
The matter presented in this work has not been submitted by us for the award of any
other degree to this or any other University.
NAME OF CANDIDATES
(ROLL NOS.)
This is to certify that the above statement made by the candidate is true and correct to
the best of my knowledge and belief.
(Name of Supervisor)
Supervisor
Date : ……..
i
NATIONAL INSTITUTE OF TECHNOLOGY
JAMSHEDPUR - 831014
Ref. No …………… Date …….
CERTIFICATE
This is to be certified that the minor/major project work entitled “Project Title”
submitted by
Name of candidates Roll No.
has been carried out under my supervision, as partial fulfillment for the award of the
degree of Bachelor of Technology (Hons.) in Civil Engineering at the National
Institute of Technology Jamshedpur, Jharkhand.
(Name of Supervisor)
NIT Jamshedpur Designation
Date: Department of Civil Engg.
NIT Jamshedpur
COUNTERSIGNED BY
(Dr. A. K. Singh)
Head
Department of Civil Engineering
NIT Jamshedpur
ii
APPROVAL
The project reported entitled “ --------------------------------“ submitted by
Name of students and Roll Numbers (All)
is hereby approved as a creditable study of engineering subject carried out and
presented in a manner satisfactory to warrant its acceptance as a pre requisite in the
degree of Bachelor of Technology (Hons.) in Civil Engineering of National
Institute of Technology, Jamshedpur – 831014 is a bonafide record of the work
carried out by them.
By this approval the undersigned do not necessarily endorse any statement and
opinion expressed or conclusion drawn therein but approve the project report only for
the purpose for which it has been submitted.
The viva-voce examination of – Name of Candidates ---, Bachelor of Technology
(Hons.), has been held on ………………………….
BOARD OF PROJECT REPORT EXAMINARS
iii
ACKNOWLEDGEMENTS
[Not more than one (01) page]
iv
ABSTRACT
[Not more than one (01) page]
v
CONTENTS
CANDIDATE’S DECLARATION ................................................................................ i
CERTIFICATE
APPROVAL
ACKNOWLEDGEMENTS .......................................................................................... iv
ABSTRACT................................................................................................................... v
LIST OF FIGURES .....................................................................................................vii
LIST OF TABLES ..................................................................................................... viii
NOTATIONS/ABBREVIATIONS .............................................................................. ix
CHAPTER 1 ................................................................................................................ 10
1.1............................................................................................................................. 11
APPENDIX - A............................................................................................................ 19
A.1............................................................................................................................ 19
REFERENCES ............................................................................................................ 20
vi
LIST OF FIGURES
Fig. 1.1 : Intensity-Duration-Frequency Graph ........................................................... 18
vii
LIST OF TABLES
Table 1.1 : Calculated Value of Frequency Factor ...................................................... 17
viii
NOTATIONS/ABBREVIATIONS
ix
Chapter – 1
INDRODUCTION
1.1 GENERAL
1.1.1 Sub – heading
[Link] Tertiary heading
Last Article – IMPORTANCE OF THE PROJECT
Chapter – 2
REVIEW OF LITERATURE
Last Article - CONCLUDING REMARKS
Chapter – 3
EXPERIMENTAL WORK
OR
COMPUTER PROGRAMME
OR
METHODOLGY
Chapter – 4
RESULT AND DISCUSSION
Chapter – 5
CONCLUSION AND FUTURE SCOPE
INSTRUCTIONS FOR WRITING
▪ Cover Page (Front and Back) Colour: Green Colour with Silver
Writing on Synthetic sheet
▪ Title page - One printing page (A4) size as same matter of cover
page with transparent sheet
▪ Copy right page
▪ Fonts Selection:
Chapter Number: Times New Roman- 16 pts (Bold, Title Case).
Chapter Title: Times New Roman- 14 pts (Bold, UPPERCASE).
Heading 1: Times New Roman- 12 pts (Upper case Bold).
Heading 2: Times New Roman- 12 pts (Bold, Capitalise each word).
Heading 3: Times New Roman- 12 pts (Italic, First letter Capital).
Normal Text: Times New Roman- 12 pts.
▪ Line spacing – 1.5.
▪ Custom Margins: Left- 3.8 cm, Right – 2 cm, Top – 2 cm, Bottom – 2 cm.
▪ Paper Size- A4.
▪ All the equations should be typed in equation editor. You can use equations tools
or editor for writing equations. It should not be pasted as images. All equations
should be numbered in right side.
▪ All pages except first page (cover page) should be numbered as given in the
template.
▪ All tables and figures should be titled and numbered, and all should be listed as
given in the format.
▪ Table and Figure should be discussed first and then it will appear at proper place.
▪ Please list out all the references such as journal papers, books, websites, data
sources that you have cited in your project. Both citation and reference should
tally.
▪ Please use appendix if you want to give additional details of some topics/method.
It is optional.
▪ Plagiarism – Should not be more than 20 %. A copy of the certificate from
Institute approved software must be attached in the last.
▪ Minimum no. of Pages – Not less than 40.
▪ Minor Project – Spiral binding
▪ Major Project – Hard binding
Note
1. Good printing on A4 size & GSM not less than 100 paper and Xerox should
also be standard of same quality.
2. Project should be printed single side of the paper, but new chapter should start
from a new front page (odd page).
Equations, Articles, Tables & Figures should be numbered chapter wise.
Writing Equation:
In chapter - 1
6 𝑇
KT = − 𝜋 [0.5772 + ln {ln (𝑇−1)}] (1.1)
XT = x̅ + KTS (1.2)
where, XT is random variable
T is the return period
x̅ is the mean and S is the standard deviation
and KT is the frequency factor
Creating Tables:
Table 1.1 Calculated Value of Frequency Factor
T 2 15 30 60 80
KT -0.164 1.635 2.189 2.736 2.962
Inserting Figures:
Fig. 1.1 Intensity-Duration-Frequency Graph
APPENDIX - A
A.1
19
REFERENCES
1. Michael, A. M. (1978), : “Irrigation Theory and Practice”, Vikas Publishing House
Pvt. Ltd., New Delhi, pp --.
2. Rao N. H., Sarma P. B. S., and Chander S. (1992), : “Real-time Adaptive Irrigation
Scheduling under a Limited Water Supply”, Agricultural Water Management, 20(4),
267-279.
3. Survey, of India. (1987), : “1:36 Million Plain Outline Map of India”,
<[Link] >.
20
