Seated valves
Lifting modules and lifting/lowering valves
type HMB, HMC, HMT, and HSV, HZV etc.
These lifting modules and lifting/lowering valves were developed Nomenclature: Valve combination consist-
especially for the actuation of hoists e.g. turret trucks, order pickers, ing of (depending on type):
reach trucks and walkie stackers. They consist of a combination of vari- • 3-way flow control valve
ous valve types (flow control valves, throttles, directional valves) suited • 2-way flow control valve
for the control of the main lift and for other additional functions. The • 2-way seated valves
internal control layout of the main valve is very flexible and can be • Directional spool valves
tailored to meet exactly the requirements of the drive concept (constant
delivery or speed controlled pump) as well as the intended application. Design: Individual valve, connec-
This valve design can cope also with tion block for valve banks
additional functions being required by
simply adding directional seated or direc- Actuation: Solenoid
tional spool valve sections (e.g. type SWR
or SWS) to the main valve body. pmax: 315 bar
Qmax: 120 lpm
2 Selection table
2 Field of application and drive concept
Device type Drive concept Application
Scissor lift Miniature stacker, Counter balance Reach truck Order picker (warehouse)
1 2 3 Walkie stacker truck (no man aloft) (man aloft)
HSV ' ' '
HZV ' ' ' '
HSN ' ' '
HST ' ' ' (') '
HMB (') ' (') ' '
HMC ' (') ' '
HMT ' ' ' '
HMS ' ' ' ' '
HMF ' ' ' ' '
HMR ' ' ' '
SWR..SE ' ' ' ' '
HSW ' '
1 Constant delivery pump, lifting/lowering via flow controller (throttle)
2 Lifting via speed controlled pump, lowering via flow controller (throttle)
3 Lifting/lowering via speed controlled pump
2.2-30 2005
Lifting modules
Basic types and main parameter
Type Flow Pressure Note Tapped ports
Qmax (lpm) pmax (bar) DIN ISO 228/1 (BSPP)
HSV 21 20 P, R, A = G 3/8
HSV 22 30 P = G 3/8; A, R = G 1/2
HSV 41 40 P, R, A = G 1/2
HSV 61 60 315 Individual devices P, R, A = G 1/2
HSV 71 120 P, R, A = G 3/4
HZV 21 20 P, R, H, J = G 3/8
HSN 50 ... 100 H, R = G 3/4; P1 = G 3/8; P = (flange connection)
HST 2 20 ... 40 P, R, H = G 1/2; M = G 3/8
HST 3 30 ... 60 Connection blocks P, R, H = G 3/4; M = G 3/8
HMB 2 1) 30 of lifting module P, R = G 1/2; M = G 1/4
HMB 33 90 Add-on components: P, R = G 3/4; M, R1 = G 1/4
HMC 2 1) 30 • SWR/SWS - P, R, A = G 1/2; M = G 1/8
HMC 3 (33) 90 Valve sections P, R = G 3/4; M, R1 = G 1/4; C = G 3/8
HMT 3 70 - 90 315 • Intermediate H, P, R = G 1/2; M = G 3/8
HMT 34 70 - 90 blocks H = G 3/4; P, R = G 1/2; M = G 3/8
HMK 33 70 - 90 • End plates H, P, R = G 1/2; A, B, A1, B1 = G 1/4; M = G 3/8; H1, R1 = G 1/8
HMK 34 70 - 90 H, R = G 3/4; P = G 1/2; A, B, A1, B1 = G 1/4; M = G 3/8
HMS 4 100 R = G 3/4; C, R1 = G 3/8; M = G 1/4
HMF 4 100 R = G 3/4; C, R1 = G 3/8; M = G 1/4
HMR 4 100 P, R1, R 2 = G 3/4; P1, D = G 3/8; M = G 1/4
HSW 2 25 H, R = G 1/2; P1, P 2 = G 3/8; M = G 1/8
SWR 1 SE 1) 2) 12 P, R, R1 = G 1/4; M = G 1/8
SWR 2 SE 2) 25 P, R = G 3/8; M = G 1/4
1) Hole pattern SWR 1, T2; adaptor plates from X12 to SWR 2
2) Also for external additional functions
Symbols
Single devices: Lifting modules and connection blocks:
HSV HZV HST HMB HMC HMK
HSN HMT HMS HMF HMR HSW SWR
Further versions
• Connection blocks type SWR... with flow divider • Connection blocks type SWR... with shut-off valves for P and H (lifting)
• Connection blocks type SWR... with/without pressure limiting valve
2005 2.2-31
Seated valves
Symbols
Intermediate blocks (main and initial lift)
Size 2 3) Size 3 4)
T 23 T2 T 3, T 34, T 44 T 25
3) Hole pattern
SWR 1
4) Hole pattern
SWR 2 / SWS 2
Additional versions (intermediate blocks)
• Various intermediate blocks for turret forks at order pickers; • Directional spool valve sections type SWR1 with additional functions;
function rotate / reach / lifting / lowering Directional spool valve sections type SWS 2
(see also unter "Additional information")
End plates Additional versions (end plates)
Basic type 1 2 20E 30E • End plates with two pump ports and one return port
Size 1 and 2 1 and 2 2 2 • End plates with proportional idle circulation valve
Flow • End plate with solenoid valves to the control of a parking brake
pattern
symbols
2
2 Reach
Order examples
HMT 34-1/200-70F -G/M/0/2 AN40 BN130 Main lift Rotate
-D/M/0/02 -30E-P12/G 24
Lifting module type HMT, size 3, port size 4 with pressure
limiting valve (set for 200 bar), outflow controller with 70 lpm
metering throttle (blocked in idle position); section G with
shock and suction valves is part of the ancillary block
(settings 40 and 130 bar); end plate with idle circulation valve
(open in idle position), proportional-solenoid voltage for the
flow control valve 12V DC, solenoid voltage for directional
spool valve and directional seated valves 24V DC.
HMC 33-1/150-50/80F-T3 T3/D-20E-G 24 Main lift Initial lift Tilting
Lifting module type HMC, size 3, port size 3 (G 3/4 (BSPP))
with pressure limiting valve (set for 150 bar), 3-way flow con-
trol valve with metering throttle up to 50 lpm, 2-way flow
controller up to 80 lpm (blocked in idle position), two inter-
mediate blocks type T3 with seated valves and one directly
added directional spool valve section type SWR 2 flow
pattern D, end plate with additional port P and R as well as
a shut off valve for port P, solenoid voltage 24V DC.
2.2-32 2005
Lifting modules
Dimensions
(see order examples)
Type HMT 34 ... Directional spool
valve sections
Lifting module
End plate
Type HMC 33 .. Intermediate blocks (T3) Directional spool valve sections
Lifting module End
approx. 70
plate
All dimensions in mm, subject to
change without notice!
Basic type m (kg) Note
HMT 34 approx. 3.8 Main dimensions and weight of the missing
HMC 33 approx. 5.0 lifting modules (basic types) on inquiry!
Additional information
• Lifting module type HMC D 7650 • Plugs with LED's and others D 7163
type HMT Sk 7758 HMT • Plugs with economy circuit D 7813, D 7833
type HMB Sk 7650 B2, Sk 7650 B33 • See also section “Devices for special applications”
type HST Sk 7650 HST ++ (Devices for industrial trucks and hoists)
type HSW Sk 7650 HSW
• Directional spool valve type SWR D 7450, D 7451 For page and section of the devices additionally listed,
type SWS 2 D 7951 see type index
• Information on additional lifting modules on inquiry
2005 2.2-33
