REF # 290624-03 p.
CERTIFICATE
This is to certify that NELTEX Development Co., Inc. is producing Neltex Waterline uPVC Pipe
Series 8 with sizes 20mm, 25mm, 32mm, 40mm, 50mm, 63mm, 90mm, 100mm, with effective
length of 3 meters.
Neltex Waterline uPVC Pipe Series 8 are inspected and tested in conformance to PNS 65 : 1993
Standard Specification for Unplasticized PolyVinyl Chloride (uPVC) Pipes for Potable Water Supply.
This certification is being issued for whatever legal purposes it may serve.
Neltex Development Company Incorporated
Rey Mark Dee S. Quiatchon Redentor O. Manalo
QA Engineer QA Asst. Manager
.
REF # 290624-03 p.2
TECHNICAL SPECIFICATIONS
PRODUCT Neltex Waterline uPVC Pipe Series 8
PNS 65 : 1993 Standard Specification for Unplasticized PolyVinyl
REFERENCE STANDARD
Chloride (uPVC) Pipes for Potable Water Supply
A. DIMENSION
NOMINAL OUTSIDE DIAMETER
Wall Thickness (mm)
SIZE (mm) (mm) Effective Length (m)
MIN MAX MIN MAX
20 20.00 20.30 1.800 2.180 3.0
25 25.00 25.30 1.900 2.290 3.0
32 32.00 32.30 2.000 2.400 3.0
40 40.00 40.30 2.300 2.730 3.0
50 50.00 50.30 2.900 3.390 3.0
63 63.00 63.30 3.600 4.160 3.0
90 90.00 90.30 5.200 5.920 3.0
100 110.00 110.40 6.300 7.130 3.0
B. PHYSICAL PROPERTIES
PROPERTY STANDARD REQUIREMENT TEST METHOD
ISO 2507 Unplasticized Polyvinyl
Vicat Softening
Minimum 76° C Chloride (PVC) pipes and fittings –
Temperature
Vicat Softening temperature
No sign of delamination or ISO 9852 Unplasticized Polyvinyl
Resistance to
disintegration after 15 minutes of Chloride (PVC) pipes and fittings –
Dichloromethane
immersion Dichloromethane Resistance
5.00% maximum after 120 minutes ISO 2505 Thermoplastics Pipes -
Longitudinal Reversion
at 150° C Longitudinal Reversion
True Impact Rate (TIR) shall not ISO 3127 Thermoplastics Pipes –
Resistance to External exceed 10% where TIR = total number Determination of Resistance to
Blows of breaks / External Blows
(Impact Resistance) total number of blows Round - the - Clock Method
REF # 290624-03 p.3
B. PHYSICAL PROPERTIES
PROPERTY STANDARD REQUIREMENT TEST METHOD
No evidence of splitting, cracking or
ASTM D2241 Standard Specification
Flattening breaking when flattened to 40% of the
for Polyvinyl Chloride (PVC) Pressure-
outside diameter
Rated Pipe (SDR Series)
ISO 2508 Unplasticized Polyvinyl
Chloride (PVC) pipes and fittings
Water Absorption Maximum 40 g/m² - Water Absorption –
Determination and
Specification
ISO 3473 Unplasticized Polyvinyl
Mass of Specimen shall not increase Chloride (PVC) pipes
Resistance to Sulfuric Acid by more than 0.316g - Effect of Sulfuric Acid –
nor decrease by more than 0.013g Requirement and
Test Method
Burst Pressure –
The pipe shall withstand 4.56MPa for
ISO 1167 Thermoplastic Pipes Fittings
at least 60 seconds without failure
and Assemblies for the Conveyance
Hydrostatic Pressure of Fluids
Short Term Pressure –
Determination of the
The pipe shall withstand 4.30MPa for
Resistance to Internal Pressure
at least 1 hour without failure
Rey Mark Dee S. Quiatchon Redentor O. Manalo
QA Engineer QA Asst. Manager
