Product data sheet JZ-HL-AL

Multileaf dampers
JZ-HL-AL

Opposed blades

Multileaf dampers made of aluminium for low-leakage

shut-off in air conditioning systems

Rectangular multileaf dampers for volume flow and pressure control as well as for
low-leakage shut-off of ducts and openings in walls and ceiling slabs
■ Maximum dimensions 1200 × 1000 mm
■ Closed multileaf damper air leakage to EN 1751, class 2
■ Casing air leakage to EN 1751, class C
■ Aerofoil opposed action blades
■ Blades interconnected by gears
■ Available in standard sizes and many intermediate sizes

Optional equipment and accessories

■ Actuators: Open/close actuators, modulating actuators
■ Powder-coated construction
■ Anodised construction

1 / 16 PD-03/2022 - DE/en
 Product data sheet JZ-HL-AL

General information 2 Dimensions 8

Function 3 Attachments 10
Technical data 4 Product details 13
Quick sizing 4 Installation details 15
Specification text 6 Nomenclature 16
Order code 7

General information
Application
▪ Multileaf dampers as a control element in volume flow rate Accessories
and differential pressure control in ventilation and air ▪ Installation subframes for the fast and simple installation of
conditioning systems multileaf dampers
▪ For low-leakage shut-off of ducts and openings in walls and
Construction features
ceiling slabs
▪ Rectangular casing, with screws, material thickness 1.5 mm
Special features ▪ Blades, material thickness 1.25 mm
▪ Aerofoil blades ▪ Flanges on both sides, suitable for duct connection, with
▪ Low-maintenance, robust construction corner holes
▪ No parts with silicone ▪ Gears on both blade ends
▪ Available in standard sizes and many intermediate sizes ▪ Damper blade shafts, Ø12 mm, with notch to indicate the
▪ Closed cell side seals meet increased hygiene requirements damper blade position (not for attachment ZS99)
▪ With drive shaft as an attachment: For the position of the
Classification drive shaft see 'Dimensions and weight'
Air leakage with closed multileaf damper according to EN 1751: ▪ With actuator as an attachment: The actuator position at the
test pressure up to 2000 Pa first blade from the top (with up to 3 blades) or at the third
▪ Class 2 blade from the top (with 4 or more blades)
▪ Blade tip seals
Nominal sizes
▪ B: 200 – 1200 mm, in increments of 1 mm Materials and surfaces
▪ H: 100, 150, 200, 250, 300, 350, 400, 450, 500, 550, 600, ▪ Casing and blades made of extruded aluminium sections
650, 700, 750, 800, 850, 900, 950, 1000 mm ▪ Shafts, bearing plate and position indicator made of
▪ Any combination of B × H galvanised steel
▪ Blade tip seals made of PE/PTV plastic
Parts and characteristics ▪ P1: Powder-coated, RAL CLASSIC colour
▪ Ready-to-install shut-off damper ▪ PS: Powder-coated, DB colour
▪ Blades with gears ▪ S3: Anodised, colour according to EURAS standard, E6-C-0
▪ Drive arm
▪ Quadrant stay with blade position indicator Standards and guidelines
▪ Operating temperature 0 to 60 °C ▪ Casing air leakage to EN 1751, class C
▪ Meets the general requirements of DIN 1946, Part 4, with
Attachments regard to the acceptable closed multileaf damper air leakage
▪ Quadrant stays and limit switches for the infinite adjustment
of the multileaf dampers and for capturing the end positions Maintenance
▪ Open/close actuators for opening and closing multileaf ▪ Maintenance-free as construction and materials are not
dampers subject to wear
▪ Modulating actuators for variable damper blade positions ▪ Contamination should be removed as it may lead to corrosion
▪ Pneumatic actuators for opening and closing multileaf and to increased closed multileaf damper air leakage
dampers

2 / 16 PD-03/2022 - DE/en
 Product data sheet JZ-HL-AL

Function
Multileaf dampers with gears can only have opposed action The internal gears transfer the synchronous rotational movement
blades. from the drive arm to the individual blades.

Schematic illustration of JZ-HL-AL

① Casing
② Blade tip seal
③ Opposed blades
④ Gears
⑤ Bearing plate with quadrant stay
⑥ Actuator

3 / 16 PD-03/2022 - DE/en
 Product data sheet JZ-HL-AL

Technical data
The torque for actuating multileaf dampers must be dimensioned so that the damper can be safely opened and closed. For closure,
the torque must suffice to ensure complete shut-off by the blades. Opening is initiated without the impact of aerodynamic forces.
When air flows through the damper, the aerodynamic forces of the airflow create a closing force (torque) on the blades; this happens
independently of the direction of the airflow. This closing force must be countered, or overcome. The blade angle α with the largest
torque depends, among other things, on the fan characteristics.

Nominal sizes 200 × 100 mm – 1200 × 1000 mm

Maximum permitted static differential pressure for a closed
2000 Pa
multileaf damper
Operating temperature 0 to 60 °C

Minimum torques [Nm]

B
H
200 400 500 600 700 800 900 1000 1100 1200
100 – 450 5 5 5 5 5 5 5 5 5 5
500 – 1000 10 10 10 10 10 10 10 10 10 10

Free cross-sectional area [mm2]

B
H
200 300 400 500 600 700 800 900 1000 1100 1200
100, 150 0.014 0.022 0.03 0.038 0.047 0.055 0.063 0.071 0.079 0.087 0.095
200, 250 0.028 0.045 0.061 0.077 0.093 0.109 0.126 0.142 0.158 0.174 0.19
300, 350 0.043 0.067 0.091 0.115 0.14 0.164 0.188 0.213 0.237 0.261 0.286
400, 450 0.057 0.089 0.122 0.154 0.186 0.219 0.251 0.284 0.316 0.348 0.381
500, 550 0.071 0.111 0.152 0.192 0.233 0.273 0.314 0.354 0.395 0.435 0.476
600, 650 0.085 0.134 0.182 0.231 0.279 0.328 0.377 0.425 0.474 0.522 0.571
700, 750 0.099 0.156 0.213 0.269 0.326 0.383 0.439 0.496 0.553 0.61 0.666
800, 850 0.113 0.178 0.243 0.308 0.373 0.437 0.502 0.567 0.632 0.697 0.761
900, 950 0.128 0.2 0.273 0.346 0.419 0.492 0.565 0.638 0.711 0.784 0.857
1000 0.142 0.223 0.304 0.385 0.466 0.547 0.628 0.709 0.79 0.871 0.952
Intermediate sizes: Interpolate values between widths.

Sound power level for a closed multileaf damper LWA [dB(A)]

Δpt [Pa] Area B × H [m²]

Δpt [Pa] 0.04 0.09 0.16 0.25 0.36 0.64 0.81 1 1.2
100 28 32 34 36 38 40 41 42 43
200 37 41 44 46 47 50 51 51 52
500 49 53 56 58 59 >60 >60 >60 >60
1000 59 >60 >60 >60 >60 >60 >60 >60 >60
1500 >60 >60 >60 >60 >60 >60 >60 >60 >60
2000 >60 >60 >60 >60 >60 >60 >60 >60 >60

Quick sizing
Quick sizing tables provide a good overview of the sound power levels and differential pressures that can be expected. Approximate
intermediate values can be interpolated. Precise intermediate values and spectral data can be calculated with our Easy Product
Finder design program.
The sound power levels LWA apply to multileaf dampers with a cross-sectional area (B × H) of 1 m².
The differential pressures apply to multileaf dampers installed in ducts (installation type A).

4 / 16 PD-03/2022 - DE/en
 Product data sheet JZ-HL-AL

Quick sizing – differential pressure and sound power level

Damper blade position α
v [m/s] OPEN 20° 40° 60° 80°
Δpt [Pa] LWA [dB(A)] Δpt [Pa] LWA [dB(A)] Δpt [Pa] LWA [dB(A)] Δpt [Pa] LWA [dB(A)] Δpt [Pa] LWA [dB(A)]
0.5 <5 <30 <5 <30 <5 <30 22 42 245 67
1 <5 <30 <5 <30 8 35 90 58 985 83
2 <5 <30 <5 32 32 51 350 74 >2000 >90
4 <5 43 12 48 125 67 1390 90 >2000 >90
6 <5 52 24 57 275 76 >2000 >90 >2000 >90
8 10 59 45 64 490 83 >2000 >90 >2000 >90

Installation type

A = Ducts on both sides

B = Air discharge
C = Air intake
D = Air transfer

5 / 16 PD-03/2022 - DE/en
 Product data sheet JZ-HL-AL

Specification text
This specification text describes the general properties of the product. Texts for variants can be generated with our Easy Product
Finder design program.

▪ Shafts, bearing plate and position indicator made of

Rectangular multileaf dampers for volume flow and pressure galvanised steel
control as well as for low-leakage shut-off of ducts and openings ▪ Blade tip seals made of PE/PTV plastic
in walls and ceiling slabs. Ready-to-operate unit which consists ▪ P1: Powder-coated, RAL CLASSIC colour
of the casing, aerofoil blades and the blade mechanism. Flanges ▪ PS: Powder-coated, DB colour
on both sides, suitable for duct connection. The blade position is ▪ S3: Anodised, colour according to EURAS standard, E6-C-0
indicated externally by a notch in the blade shaft extension.
Closed multileaf damper air leakage according to EN 1751, Technical data
Class 2. Casing leakage according to EN 1751, Class C. ▪ Nominal sizes: 200 × 100 mm – 1200 × 1000 mm
▪ Maximum permitted static differential pressure for a closed
Special features multileaf damper: 2000 Pa
▪ Aerofoil blades ▪ Operating temperature: 0 to 60 °C
▪ Low-maintenance, robust construction
▪ No parts with silicone Sizing data
▪ Available in standard sizes and many intermediate sizes ▪ qv (m³/h)
▪ Closed cell side seals meet increased hygiene requirements ▪ Δpt [Pa]
Air-regenerated noise
Materials and surfaces ▪ LPA [dB(A)]
▪ Casing and blades made of extruded aluminium sections

6 / 16 PD-03/2022 - DE/en
 Product data sheet JZ-HL-AL

Order code
JZ-HL-AL / 1200 × 800 / ER / Z64 / NO / P1 – RAL …
| | | | | |
1 2 3 4 5 6

1 Type 5 Damper blade safety function

JZ-HL-AL Low-leakage multileaf damper made of aluminium, Only for spring return actuators or pneumatic actuators
closed multileaf damper air leakage to EN 1751, class 2 NO Pressure off/power off to OPEN
NC Pressure off/power off to CLOSE
2 Nominal size [mm]
B×H 6 Surface
No entry required: Standard construction
3 Installation subframe P1 Powder-coated, specify RAL CLASSIC colour
No entry required: None S3 Anodised to EURAS standard E6-C-0
ER With installation subframe
Gloss level
4 Attachments RAL 9010 50 %
Z04 Hold open device RAL 9006 30 %
Z05 – Z07 Quadrant stay and limit switches All other RAL colours 70 %
Z12 – Z51 Actuators
ZF01 – ZF15 Spring return actuators
Z60 – Z77 Pneumatic actuators

Order example: JZ-HL-AL/800×500/Z04/S3

Nominal size 800 × 500 mm
Installation subframe None
Attachments Hold open device
User interface Anodised, EURAS E6-C-0, natural colour

7 / 16 PD-03/2022 - DE/en
 Product data sheet JZ-HL-AL

Dimensions
JZ-HL-AL, standard sizes

JZ-AL, JZ-HL-AL, standard sizes

Spindle position
H No. of blades
X Damper blade
100 1 50 1
200 2 50 1
300 3 50 1
400 4 250 3
500 5 250 3
600 6 250 3
700 7 250 3
800 8 250 3
900 9 250 3
1000 10 250 3

8 / 16 PD-03/2022 - DE/en
 Product data sheet JZ-HL-AL

JZ-HL-AL, intermediate sizes

JZ-AL, JZ-HL-AL, intermediate sizes

Spindle position
H No. of blades
X Damper blade
150 1 50 1
250 2 50 1
350 3 50 1
450 4 250 3
550 5 250 3
650 6 250 3
750 7 250 3
850 8 250 3
950 9 250 3

9 / 16 PD-03/2022 - DE/en
 Product data sheet JZ-HL-AL

JZ-HL-AL, weight [kg]

B
H
200 300 400 500 600 700 800 900 1000 1100 1200
100 2 2 2 3 3 3 3 3 3 4 4
200 3 3 3 4 4 4 4 4 5 5 5
300 3 4 4 4 5 5 5 6 6 6 7
400 4 4 5 5 6 6 6 7 7 8 8
500 4 5 5 6 6 7 8 8 9 9 10
600 5 5 6 7 7 8 9 9 10 11 11
700 5 6 7 7 8 9 10 11 11 12 13
800 6 6 7 8 9 10 11 12 13 14 14
900 6 7 8 9 10 11 12 13 14 15 16
1000 7 8 9 10 11 12 13 14 15 17 18

Attachments

Quadrant stays and limit switches

Order code detail Description Limit switch Function
Z04 Hold open device –
Damper blade position
Z05 Hold open device 1
CLOSED
Z06 Hold open device 1 Damper blade position OPEN
Damper blade positions
Z07 Hold open device 2
CLOSED and OPEN

Open/close actuators
Order code detail Description Function Supply voltage Torque Auxiliary switch
1-wire-control
Z12 SM230A 100 – 240 V AC 20 Nm –
2-wire-control (3-point)
1-wire-control
Z14 SM24A 24 V AC/DC 20 Nm –
2-wire-control (3-point)
1-wire-control
Z16 SM230A 100 – 240 V AC 20 Nm S2A
2-wire-control (3-point)
1-wire-control
Z18 SM24A 24 V AC/DC 20 Nm S2A
2-wire-control (3-point)
1-wire-control
Z42 LM230A 100 – 240 V AC 5 Nm –
2-wire-control (3-point)
1-wire-control
Z43 NM230A 100 – 240 V AC 10 Nm –
2-wire-control (3-point)
1-wire-control
Z44 LM24A 24 V AC/DC 5 Nm –
2-wire-control (3-point)
1-wire-control
Z45 NM24A 24 V AC/DC 10 Nm –
2-wire-control (3-point)
1-wire-control
Z46 LM230A 100 – 240 V AC 5 Nm S2A
2-wire-control (3-point)
1-wire-control
Z47 NM230A 100 – 240 V AC 10 Nm S2A
2-wire-control (3-point)
1-wire-control
Z48 LM24A 24 V AC/DC 5 Nm S2A
2-wire-control (3-point)
1-wire-control
Z49 NM24A 24 V AC/DC 10 Nm S2A
2-wire-control (3-point)
Minimum torque of multileaf damper has to be considered when selecting the actuator.

10 / 16 PD-03/2022 - DE/en
 Product data sheet JZ-HL-AL

Open/Close actuators, fast-running

Order code detail Description Function Supply voltage Torque Auxiliary switch
ZS21 SMQ24A 1-wire-control 24 V AC/DC 16 Nm –
ZS22 SMQ24A 1-wire-control 24 V AC/DC 16 Nm S2A

Open/close actuators, spring return

Order code detail Description Function Supply voltage Torque Auxiliary switch
ZF01 NF24A Supply voltage on/off 24 V AC/DC 10 Nm –
24 – 240 V AC
ZF02 NFA Supply voltage on/off 10 Nm –
24 – 125 V DC
ZF03 NF24A-S2 Supply voltage on/off 24 V AC/DC 10 Nm integrated
24 – 240 V AC
ZF04 NFA-S2 Supply voltage on/off 10 Nm integrated
24 – 125 V DC

Modulating actuators
Order code detail Description Function Supply voltage Torque Auxiliary switch
Z20 SM24A-SR 2 – 10 V DC 24 V AC/DC 20 Nm –
Z50 LM24A-SR-F 2 – 10 V DC 24 V AC/DC 5 Nm –
Z51 NM24A-SR 2 – 10 V DC 24 V AC/DC 10 Nm –

Modulating actuators, spring return

Order code detail Description Function Supply voltage Torque Auxiliary switch
ZF05 NF24A-SR 2 – 10 V DC 24 V AC/DC 10 Nm –

Double acting pneumatic actuators

Damper blade safety Operating
Order code detail Description Torque at 6 bar Limit switch Solenoid valve
function pressure
Z60 DR030 – 1.2 – 6 bar 35 Nm – –
Z61 DR030 power off to close/open 1.2 – 6 bar 35 Nm – 24 V DC
Z62 DR030 power off to close/open 1.2 – 6 bar 35 Nm – 230 V AC
Z63 DR030 – 1.2 – 6 bar 35 Nm 2
Z64 DR030 power off to close/open 1.2 – 6 bar 35 Nm 2 24 V DC
Z65 DR030 power off to close/open 1.2 – 6 bar 35 Nm 2 230 V AC
Z66 DR060 – 1.2 – 6 bar 70 Nm –
Z67 DR060 power off to close/open 1.2 – 6 bar 70 Nm – 24 V DC
Z68 DR060 power off to close/open 1.2 – 6 bar 70 Nm – 230 V AC
Z69 DR060 – 1.2 – 6 bar 70 Nm 2
Z70 DR060 power off to close/open 1.2 – 6 bar 70 Nm 2 24 V DC
Z71 DR060 power off to close/open 1.2 – 6 bar 70 Nm 2 230 V AC
Z60 – Z65: At 1.2 bar operating pressure only up to height H ≤ 650 mm

11 / 16 PD-03/2022 - DE/en
 Product data sheet JZ-HL-AL

Single acting pneumatic actuators

Damper blade safety Operating
Order code detail Description Torque at 6 bar Limit switch Solenoid valve
function pressure
SC060 pressure off to close/
Z72 6 bar 30 Nm
SO060 open
SC060 power off and pressure
Z73 6 bar 30 Nm 24 V DC
SO060 off to close/open
SC060 power off and pressure
Z74 6 bar 30 Nm 230 V AC
SO060 off to close/open
SC060 pressure off to close/
Z75 6 bar 30 Nm 2
SO060 open
SC060 power off and pressure
Z76 6 bar 30 Nm 2 24 V DC
SO060 off to close/open
SC060 power off and pressure
Z77 6 bar 30 Nm 2 230 V AC
SO060 off to close/open

12 / 16 PD-03/2022 - DE/en
 Product data sheet JZ-HL-AL

Product details

▪ Drive shafts (special accessory) upon request

Aluminium multileaf dampers, corner holes

B + 76

B
X X
20

13
38

19
H + 76
H

19

38

13 / 16 PD-03/2022 - DE/en
 Product data sheet JZ-HL-AL

JZ-LL-AL, JZ-HL-AL, drive shafts

x x

~120
Ø12

Ø12
~70

① ②

x
25
Ø12
□9

~70

① Standard shaft
② ZS99 – extended drive shaft
③ ZS991 – square shaft 9 mm

14 / 16 PD-03/2022 - DE/en
 Product data sheet JZ-HL-AL

Installation details

Installation and commissioning

▪ With horizontal or vertical blades
▪ With or without installation subframe
▪ Torsion-free installation
▪ Only for installation in internal spaces

Duct installation Wall installation without installation subframe

15 / 16 PD-03/2022 - DE/en
 Product data sheet JZ-HL-AL

Nomenclature
B [mm] α [kPa]
Duct width Damper blade position, 0°: OPEN, 90°: CLOSED

H [mm] A [m²]
Duct height Upstream cross section

Lengths v [m/s]
All lengths are given in millimetres [mm] unless stated otherwise Airflow velocity based on the upstream cross section (B × H)

n[] qv [m³/h]; [l/s]

Number of flange screw holes Volume flow rate

m [kg] Δpt [Pa]

Weight Differential pressure

LWA [dB(A)] Δpmax t [Pa]

A-weighted sound power level of air-regenerated noise for the Maximum differential pressure
multileaf damper

16 / 16 PD-03/2022 - DE/en