NOTES

1. ALL LEVELS AND DIMENSIONS TO BE CHECKED ON SITE.

2. THIS DRAWING TO BE READ IN CONJUNCTION WITH
THE ARCHITECTURAL DRAWINGS.
3. ALL CONCRETE WORK TO COMPLY WITH SABS 1200G.
3 4 4. CONCRETE CLASS :-
9 10 a) PILECAPS & GROUND BEAMS
b) STRIP FOOTINGS & BASES
= 25 MPa
= 25 MPa
c) COLUMNS, SHEAR & LIFT WALLS = 30 MPa
d) SLABS, BEAMS & STAIRCASES = 25 MPa
e) RETAINING WALLS = 25 MPa
N N G G f) SURFACE BEDS = 30 MPa
g) BLINDING = 10 MPa
5. COVER TO REINFORCEMENT :-
AS INDICATED ON DRAWING

6. ALL FOUNDATION EXCAVATIONS TO BE INSPECTED BY

THE ENGINEER PRIOR TO CASTING OF CONCRETE.

3730
3820
7. ALL REINFORCING FIXING TO BE INSPECTED BY
THE ENGINEER PRIOR TO CASTING OF CONCRETE.
A A 8. SIX CUBES TO BE TAKEN PER POUR.
EXISTING FIRST FLOOR SLAB
THREE TO BE TESTED AT SEVEN DAYS, THE
3360 o/a steel angle
3015 o/a steel angle REMAINDER AT TWENTY EIGHT DAYS. THE RESULTS
180 500 500 500 500 500 500 180 TO BE FORWARDED TO THE ENGINEER.
200 500 500 500 500 500 315 M20 chemical anchors @ 500mm centres as shown. 9. CONTRACTOR TO CONSTRUCT A BLINDING LAYER
M20 chemical anchors @ 500mm centres as shown.

185
IF SOIL CONDITIONS RESULT IN REINFORCEMENT

I.J.
See chemical anchor specification. (Typical)

10
140
I.J.

See chemical anchor specification. (Typical)

10

COVER NOT BEING MAINTAINED.

l l 10. ALL STRUCTURAL CONCRETE TO BE CURED FOR
ne ne

500
500
a Slab Infilll Steel Support Angle : a
ll p
i ll p
i
A MINIMUM OF FIVE DAYS.
in f 100x100x10L welded to A in f

2850 o/a concrete slab

2760 o/a concrete slab

2870 o/a steel angle

A

2780 o/a steel angle

b b 11. BRICKWORK SHOWN HATCHED ARE LOAD BEARING.
s la s .

500
a

500
Slab Infilll Steel Support Angle : sl s 100x100x10mm thk. flat with
100x100x10L welded to r .c. n gle 6mm full penetration bevel weld .r c. ngle ALL LOAD BEARING BRICKWORK TO BE 14MPa NFX.
) a a) el a TOP OF ALL BRICKWORK TO RECEIVE 2 LAYERS OF
P a te e l
10380

10380
P

2870

500
2780

100x100x10mm thk. flat with fixed to the side of the existing r.c. slab M te

500
M
25 s (2 5 o n s 3 PLY MALTHOID ON SMOOTH RENDERED SURFACE.
6mm full penetration bevel weld k . ( d on with M20 chemical anchors. .
th k rte d
t h te 12. ALL SINGLE SKIN BRICKWORK TO BE STOPPED 2
m p or m

500
fixed to the side of the existing r.c. slab See chemical anchor specification. o

500
m A A 5m u pp A A COURSES BELOW SOFFIT OF SLAB AND COMPLETED
with M20 chemical anchors. 2 5 5 su
p
A Soffit of steel angle @ +1352,550 lvl. w
2 5 s A AFTER PROPS HAVE BEEN REMOVED.
ew Ne

500
See chemical anchor specification. (Typical).

500
N
Soffit of steel angle @ +1352,550 lvl. 13. ALL CONCRETE PLASTER AND BRICKWORK PLASTER
INTER-FACES TO RECEIVE V-JOINTS.
(Typical).
I.J.

I.J.
10

10
14. THE ENGINEER REQUIRES 24HRS NOTICE FOR ALL

185
140 INSPECTIONS.
200 500 500 500 500 500 315
3005 o/a concrete slab 10
180 500 500 500 500 500 500 180
3015 o/a steel angle I.J. 2510
3350 o/a concrete slab 10
EXISTING FIRST FLOOR SLAB I.J.
3360 o/a steel angle 2040
3780

3780
125 5400 5400

A A
REV DESCRIPTION BY DATE

O O J J

3 4
9 10 T1 FOR TENDER PURPOSES S.A. 24/06/2020

professional person [Link] PrTechEng registration 200670211

PLAN PLAN PROJECT MANAGER | PRINCIPAL AGENT

R.C. SLAB INFILL PANEL ON EXISTING FIRST FLOOR R.C. SLAB INFILL PANEL ON EXISTING FIRST FLOOR

M20 CHEMICAL ANCHOR SPECIFICATION :

Fischer M20 (8.8) galvanised H.D. Anchor Studs CLIENT
(with embedment length = 200mm) with Fischer
FIS-V-360 Chemical Mortar or equally approved
Chemical Anchors with 'ETA' ( European Technical
Approval).

CL CL CL
anchor anchor anchor
PROJECT
500 500 500 500 10mm deep x 10mm wide
centres centres 'Dow Corning 813C' silicone UMALUSI OFFICES
typical typical
All structural steel angles and flats New 255mm thk. (25MPa)
sealant (or equally approved) ADDITIONS AND ALTERATIONS
on 10mm thk. polystyrene backing.
100 to be grade S355JR hot-dipped r.c. slab infill panel
First floor t.o.c. Existing first floor slab. galvanised to ISO 1461 or EN 10240. supported on steel angles. First floor t.o.c. Existing first floor slab.
50 50 DETAILS
@ + 1352,805 lvl. @ + 1352,805 lvl.
EXISTING MAIN BUILDING
55

55
NEW R.C. SLAB IN-FILL PANELS

50 50
100

100
CL CL
ON THE EXISTING FIRST FLOOR SLAB
255

255
50

200
255
150
200

150

STRUCTURAL LAYOUT & DETAILS

100

100
Slab Infill Steel Support Angle : 100x100x10mm thk. flat fixed to the side of the
100x100x10L welded to existing r.c. slab with 1 No. M20 chemical anchor. Slab Infilll Steel Support Angle : 100x100x10mm thk. flat fixed to the side of
100x100x10mm thk. flat with 100x100x10L welded to r.c. slab with 1 No. M20 chemical anchor.
6mm full penetration bevel weld.
Soffit of steel angle @ +1352,550 lvl.
TYPICAL ELEVATION See chemical anchor specification.
100x100x10mm thk. flat with See chemical anchor specification.
6mm full penetration bevel weld
R.C. SLAB INFILL PANEL fixed to the side of the existing r.c. slab
with M20 chemical anchors.
SUITE 106, ESSENVIEW BUILDING, STRATHMORE PARK,

STEEL SUPPORT ANGLE DETAIL See chemical anchor specification.

Soffit of steel angle @ +1352,550 lvl.
305 MUSGRAVE ROAD, DURBAN, 4001
e-mail : admin@[Link]
FAX (031) 3092929 TEL. (031) 3095831

SECTION A - A DESIGNED K.L.

COPYRIGHT RESERVED
SCALES

DRAWN K.L. 1:25 1:10

APPROVED M.N. PL DATE 30/01/2020

FOR TENDER PURPOSES DRAWING No.

200-309 / 304 REV
T1