ITI Plumber 1st Year Module 1 Safety Hand tools

(1). What is the use of chain pipe wrench?

(A) Hold square and flat objects
(B) Assembly and disassembly of small jobs
(C) Gripping small diameter jobs
(D) Hold cylindrical and irregular jobs
Correct Answer : D

(2). What is the purpose of surface gauge?

(A) Scribing lines parallel to datum surface
(B) Transfer the dimensions of job
(C) Check the accuracy of job
(D) Measure the dimension of job
Correct Answer : A

(3). What is marked as ‘X’ of saw blade?

(A) Root
(B) Pitch
(C) Flank
(D) Crest
Correct Answer : B

(4). Which PPE is used for foot protection?

(A) Helmet
(B) Ear plug
(C) Safety shoes
(D) Hand gloves
Correct Answer : C

(5). What is the angle marked as ‘X’?

(A) 45°
(B) 71°
(C) 50°
(D) 60°
Correct Answer : D

(6). Why hacksaw blade is moved slowly at finishing of cut?

(A) Improve cutting action
(B) Prevent breakage of blade
(C) Avoid job damage
(D) Damage hacksaw frame
Correct Answer : B

(7). Which fire extinguisher is used to extinguish class ‘B’ fire?

(A) Halon extinguisher
(B) Foam extinguisher
(C) Dry powder extinguisher
(D) Carbon-dioxide extinguisher
Correct Answer : D

(8). Which marking media give very clear lines but take more time for drying?
(A) Copper sulphate
(B) Cellulose lacquer
(C) Prussian blue
(D) White wash
Correct Answer : C

(9). What is the advantage of universal surface gauge?

(A) Mark parallel lines on both inside and outside edges
(B) Light in weight
(C) Set the job on machine very easy
(D) Fine adjustment made quickly
Correct Answer : D

(10). What does the symbol denote?

(A) Stop
(B) Give way
(C) Pedestrian crossing
(D) Over taking prohibited
Correct Answer : B
(11). What is the name of tool?

(A) Pipe wrench

(B) Pipe cutter
(C) Multi wheel chain pipe cutter
(D) Pipe thread cutter
Correct Answer : B

(12). Which vice has movable jaw that works vertically?

(A) Pin vice
(B) Pipe vice
(C) Hand vice
(D) Quick releasing vice
Correct Answer : B
(13). What is the name of part marked as ‘X’?

(A) Nut
(B) Snug
(C) Clamp
(D) Holder
Correct Answer : B

(14). What is the name of vice?

(A) Pin vice

(B) Tool maker vice
(C) Pipe vice
(D) Hand vice
Correct Answer : D

(15). What is the colour code for plastic waste bin?

(A) Red
(B) Blue
(C) Green
(D) Yellow
Correct Answer : D

(16). What is the name of tool?

(A) Reamer
(B) Flat file
(C) Rasp cut file
(D) Single cut file
Correct Answer : C
(17). Which vice is operated by trigger to open the movable jaw?
(A) Bench vice
(B) Hand vice
(C) Quick releasing vice
(D) Tool maker’s vice
Correct Answer : C

(18). Which marking media is available in different colours?

(A) Whitewash
(B) Prussian blue
(C) Cellulose lacquer
(D) Copper sulphate
Correct Answer : C

(19). What is the name of part marked as ‘X’ in hand vice?

(A) Spring
(B) Wing nut
(C) Fixed plate
(D) Temper plate
Correct Answer : A

(20). What is the reason for damaged spindle in bench vice?

(A) Bent on spindle lever
(B) Over tightening the vice
(C) Without using the clamps
(D) Wrong handling of spindle
Correct Answer : B

(21). Why the tang portion should align in the slot while fixing drill in a socket or
sleeve?
(A) To facilitates easy removal of drill
(B) To hold the drill rigidly
(C) To prevent loosening to drill
(D) To prevent deviation from the point
Correct Answer : A
(22). What is the name of part marked as ‘X’ in pipe wrench?

(A) Pivot
(B) Spring
(C) Lever
(D) Adjusting nut
Correct Answer : D

(23). Which is used for filing leather gaskets?

(A) Rasp cut file
(B) Flat file
(C) Single cut file
(D) Double cut file
Correct Answer : A
(24). What does the safety sign indicates?

(A) Danger
(B) Do not smoke near by
(C) Inflammable material near by
(D) Do not make fire near by
Correct Answer : B

(25). What is the name of vice?

(A) Hand vice
(B) Pipe vice
(C) Engineer’s vice
(D) Tool makers vice
Correct Answer : B
 ITI Plumber 1st Year Module 2 Fitter Welder Mason

(1). What are the weld positions for pipes by gas welding?
(A) 1G, 2G and 5G
(B) 1G, 2G and 6G
(C) 1G, 2G and 3G
(D) 1G, 2G and 4G
Correct Answer : A

(2). What is use to close the pipe line that has an external thread?
(A) Plug
(B) Cap
(C) Coupling
(D) Reducer
Correct Answer : B
(3). What is the name of chisel?

(A) Flat chisel

(B) Web chisel
(C) Cross cut chisel
(D) Diamond point chisel
Correct Answer : B
(4). What is the name of caliper?

(A) Outside caliper

(B) Odd leg caliper
(C) Inside caliper
(D) Divider
Correct Answer : B
(5). What is the type of scaffolding?

(A) Independent scaffolding

(B) Dependent scaffolding
(C) Ladder scaffolding
(D) Needle scaffolding
Correct Answer : C
(6). Which type of filler metal does not require flux while gas welding?
(A) High silicon cast iron
(B) Mild steel - Type S - FSI
(C) Copper filler rod
(D) Medium nickel bronze
Correct Answer : B

(7). Which type of flux removes oxides on base metal surface?

(A) Inorganic fluxes
(B) Organic fluxes
(C) Resin
(D) Tallow
Correct Answer : A

(8). What is the percentage of strength for the cement in storage after 3 months?
(A) 48% strength
(B) 60% strength
(C) 75% strength
(D) 85% strength
Correct Answer : D

(9). Which bond, bricks are laid length wise half brick lap?
(A) Stretcher bond
(B) Header bond
(C) Raking bond
(D) Dutch bond
Correct Answer : A

(10). Why the cylinder key is not removed from the cylinder during welding?
(A) It is meant for either work also
(B) In case of emergency it helps to close the cylinders quickly
(C) It is used to balance the regulator operation
(D) It can be used as a small hammer
Correct Answer : B
(11). What is the name of machine?

(A) Pedestal drilling machine

(B) Bench drilling machine
(C) Bench grinder
(D) Pedestal grinder
Correct Answer : B

(12). Which type of bricks are used in construction such as bridges, storage
buildings etc.?
(A) Solid bricks
(B) Perforated bricks
(C) Heavy duty bricks
(D) Fire bricks
Correct Answer : C

(13). What is the recommended specification (1:1:6) for mixtures?

(A) 1 cement, 1 sand, 6 lime
(B) 1 cement, 1 lime, 6 sand
(C) 1 lime, 1 sand, 6 cement
(D) 1 lime, 1 cement, 6 clay
Correct Answer : C

(14). What is the name of surface joining the crest and root?
(A) Flank
(B) Depth
(C) Minor diameter
(D) Pitch diameter
Correct Answer : A

(15). What is the maximum permitted gap between the two joining surface in
brazing?
(A) 0.06 mm
(B) 0.07 mm
(C) 0.08 mm
(D) 1.00 mm
Correct Answer : C

(16). What is the inclination angle of chisel to cut mild steel?

(A) 22°
(B) 32°
(C) 34.5°
(D) 39.5°
Correct Answer : C

(17). Which type of filler rod contains copper, aluminium, tin along with zinc?
(A) Non ferrous filler rod
(B) Ferrous filler rod
(C) Alloy type filler rod for ferrous metals
(D) Alloy type filler rod for non ferrous
Correct Answer : A

(18). What is the root gap provided in pipe of wall thickness 3 mm for leftward
welding technique?
(A) 1.5-2.5 mm
(B) 2.5-3.0 mm
(C) 3.0-4.0 mm
(D) 4.0-5.0 mm
Correct Answer : B
(19). What is the name of punch?

(A) Centre punch

(B) Prick punch
(C) Number punch
(D) Letter punch
Correct Answer : C
(20). What is the name of caliper?

(A) Firm joint inside caliper

(B) Firm joint outside caliper
(C) Spring joint outside caliper
(D) Spring joint inside caliper
Correct Answer : C

(21). Which one is an indirect measuring instrument?

(A) Steel rule
(B) Jenny caliper
(C) Outside caliper
(D) Bevel protector
Correct Answer : C
(22). Which one is closed first while shutdown oxy-acetylene plant?
(A) Oxygen cylinder valve closed first
(B) Acetylene cylinder valve closed first
(C) Blow pipe oxygen valve closed first
(D) Blow pipe acetylene valve closed first
Correct Answer : B

(23). Which colour is painted on oxygen cylinder?

(A) Maroon colour
(B) Red colour
(C) Black colour
(D) Yellow colour
Correct Answer : C

(24). Which type of fitting is used for easy to dismantle and repair?
(A) Nipple
(B) Coupling
(C) Union
(D) Reduce
Correct Answer : C

(25). Which plaster thickness of not more than 25 mm finished surfaces resemble
very much as marble finish?
(A) Lime mortar plaster
(B) Rough coat plaster
(C) Pebble dash plaster
(D) Stucco plaster
Correct Answer : D

(26). Which grade of cement used for high strength concrete?

(A) 53 grade
(B) 33 grade
(C) 43 grade
(D) 48 grade
Correct Answer : A

(27). What is the diameter of filler rod used to weld 2.5mm thick mild steel by
leftward technique?
(A) 1.6mm
(B) 2.0mm
(C) 2.5mm
(D) 3.15mm
Correct Answer : B

(28). Which acid is used as a flux for stainless steel in soldering?

(A) Hydrochloric acid
(B) Nitric acid
(C) Phosphoric acid
(D) Sulphuric acid
Correct Answer : C
(29). Which inorganic flux is used in the form powder or mixed with water to
clean the iron or steel surfaces?
(A) Ammonium chloride
(B) Zinc chloride
(C) Phosphoric acid
(D) Hydrochloric acid
Correct Answer : A

(30). What is the type of hammer?

(A) Set hammer

(B) Plain hammer
(C) Cross hammer
(D) Straight pein hammer
Correct Answer : A

(31). What is the name of brazing if parts to be brazed are submerged in a molten
or chemical?
(A) Induction brazing
(B) Dip brazing
(C) Furnace brazing
(D) Torch brazing
Correct Answer : B

(32). What is the percentage by weight of crushed gravel sand through IS sieve
No.120?
(A) 0-10
(B) 5-30
(C) 25-60
(D) 45-85
Correct Answer : D

(33). What is the recommended proportion of mix by volume for RCC works to
machine foundation subject to vibration?
(A) Cement 1, Fine aggregate 2, Coarse aggregate 4
(B) Cement 1, Fine aggregate 3, Coarse aggregate 6
(C) Cement 1, Fine aggregate 4, Coarse aggregate 8
(D) Cement 1, Fine aggregate 2, Coarse aggregate 2
Correct Answer : A
(34). What is the name of part marked as ‘X’?

(A) Fixed jaw

(B) Twist drill
(C) Movable Jaw
(D) Parallel blocks
Correct Answer : B

(35). Which bond of bricks are laid cross wise with 5 cm lap each coarse?
(A) Stretcher bond
(B) Raking bond
(C) Header bond
(D) Dutch bond
Correct Answer : C
(36). Which is the important part in soldering iron?
(A) Handle
(B) Shank
(C) Head (copper bit)
(D) Edge
Correct Answer : C

(37). What is the type of elbow?

(A) 15° elbow

(B) 45° elbow
(C) 60° elbow
(D) 90° elbow
Correct Answer : B
(38). Which is the characteristics of first class bricks?
(A) It is yellow in colour
(B) It should be well burnt
(C) It should be with round edges
(D) It should be light in weight
Correct Answer : B

(39). What is the approximate period required in days for concrete should be kept
in curing?
(A) 1 to 7 days
(B) 7 to 28 days
(C) 28 to 35 days
(D) 35 to 45 days
Correct Answer : B

(40). Which flux is used in iron and steel while brazing?

(A) Mixture of 70% borax powder with 30% boric acid
(B) Mixture of 75% borax powder with 25% boric acid
(C) Mixture of 80% borax powder with 20% boric acid
(D) Mixture of 85% borax powder with 15% boric acid
Correct Answer : B

(41). Which is organic flux?

(A) Hydrochloric acid
(B) Zinc chloride
(C) Ammonium chloride
(D) Tallow
Correct Answer : D

(42). What is the minimum compressive strength of first-class bricks?

(A) 120 Kg/cm²
(B) 115 Kg/cm²
(C) 110 Kg/cm²
(D) 105 Kg/cm²
Correct Answer : D

(43). What is the reason for metal surface to be cleaned before soldering?
(A) Keep surface to bright
(B) Easy handling of the soldering iron
(C) Solder will never stick to a dirty surface
(D) Proper amount of heat absorbed
Correct Answer : C
(44). What is the name of die stock?

(A) Screw die stock

(B) Quick cut die stock
(C) Button pattern stock
(D) Ratchet type die stock
Correct Answer : D

(45). What is the pressure range between the dissolved acetylene gas cylinder?
(A) 14 to 15 Kg/cm²
(B) 15 to 16 Kg/cm²
(C) 120 to 150 Kg/cm²
(D) 110 to 120 Kg/cm²
Correct Answer : B

(46). What is the alloy of soft solder?

(A) Lead and copper
(B) Lead and bronze
(C) Lead and silver
(D) Lead and tin
Correct Answer : D

(47). Which is used for setting out and checking for squareness with the aid of a
straight edge or plumb rule?
(A) Mason’s square
(B) Builders square
(C) Try square
(D) Bevelled square
Correct Answer : B

(48). What is the formula used to calculate blank size of round rod before cutting
external thread?
(A) Blank size=Thread size -0.1% pitch of the thread
(B) Blank size=Thread size +0.1% pitch of the thread
(C) Blank size=Thread size -0.01% pitch of the thread
(D) Blank size=Thread size +0.01% pitch of the thread
Correct Answer : D

(49). What type of drill is fixed in the drilling machine?(

(A) Taper shank twist drill

(B) Straight shank twist drill
(C) Flat drill
(D) Square taper shank twist drill
Correct Answer : A
(50). What is the name of nut?

(A) Cap nut

(B) Square nut
(C) Hexagonal nut
(D) Self-locking nut
Correct Answer : D
 ITI Plumber 1st Year Module 3 Plumber tools and Symbols

(1). What does the plumbing symbol describe?

(A) Outlet up
(B) Reduce concentric
(C) Plug screwed
(D) Outlet down
Correct Answer : C

(2). Which die set is used in a confined space?

(A) Adjustable die set
(B) Split die set
(C) Solid die set
(D) Ratchet die set
Correct Answer : D

(3). What does the below given plumbing symbol describe?

(A) Flanged
(B) Cap
(C) Union
(D) Welded
Correct Answer : D

(4). What is the effect on pipe while bending a 6mm copper tube with the radius
less than 5 times of its diameter?
(A) Break
(B) Buckle
(C) Crack
(D) Cut
Correct Answer : B

(5). Which one gives larger flame?

(A) Propane torch
(B) Acetylene torch
(C) Kerosene blow lamp
(D) Oxy-acetylene torch
Correct Answer : C

(6). What is the purpose of slot cut provided in the circular split die?
(A) Adjust depth of cut
(B) Permit lubrication
(C) Permit chips to come out
(D) Permit slight variation in size
Correct Answer : A
(7). What is the purpose of chain pipe wrench?
(A) Gripping the irregular objects
(B) Gripping only 25 to 30mm dia pipes
(C) Gripping only 35 to 40mm dia pipes
(D) Gripping only 40 to 45 mm dia pipes
Correct Answer : A

(8). What is the name of part marked as ‘X’ in adjustable screw plate die?

(A) Collar
(B) Split pieces
(C) Guide plates
(D) Leading sides
Correct Answer : D

(9). What is swaging?

(A) Same diameter pipe joined with fittings
(B) Same diameter pipe joined without fittings
(C) Different diameter pipe joined with fittings
(D) Different diameter pipe joined without fittings
Correct Answer : B

(10). What is the advantage of hand held pipe bender?

(A) Easy to operate
(B) Less expansion
(C) Less time consuming
(D) Less manpower required
Correct Answer : B
(11). What is the part marked as ‘X’?

(A) Inner former

(B) Back former
(C) Hydraulic ram
(D) Bleed screw
Correct Answer : D

(12). What is the name of welding equipment?

(A) PPR pipe cutter

(B) PPR welding machine
(C) Gas heated operated type machine
(D) Hot bending machine
Correct Answer : B

(13). What is the cause of flare defect?

(A) Flare is too large

(B) Flare is uneven
(C) Flare too small
(D) Flare has burrs on edge
Correct Answer : B

(14). What is the name of part marked as ‘X’ in radius collar unit?
(A) Movable collar
(B) Radius collar
(C) Yoke
(D) Clamp
Correct Answer : B

(15). What does the plumbing symbol indicate?

(A) Drain cock

(B) Hose bib
(C) Safety valve
(D) Gully
Correct Answer : A

(16). What is the minimum radius required for tubing bend?

(A) 2 times the diameter
(B) 3 times the diameter
(C) 4 times the diameter
(D) 5 times the diameter
Correct Answer : D
(17). What is the name of part marked as ‘X’?

(A) Yoke
(B) Fixed jaw
(C) Holding part
(D) Movable jaw
Correct Answer : A

(18). Which one is used to wash out the small particles of dirt in chain pipe cutter?
(A) Light oil
(B) Petrol
(C) Kerosene
(D) Turpentine
Correct Answer : C

(19). What is the percentage of silver content in copper to copper brazing rod?
(A) 15 to 25%
(B) 25 to 35 %
(C) 35 to 45 %
(D) 40 to 50 %
Correct Answer : C

(20). How to locate fluid supply systems on plumbing drawing?

(A) By symbols
(B) By the colour of pipe
(C) By the dia of pipe
(D) By material of pipe
Correct Answer : A
(21). What is the name of symbol as per I.S?

(A) Stop valve

(B) Safety valve
(C) Mixing valve
(D) Pump
Correct Answer : D

(22). What is the purpose of using hemp packing in the pipe thread?
(A) To provide cushioning effect
(B) To prevent leakage
(C) To prevent damage to thread
(D) To make proper joint
Correct Answer : B

(23). Which type of metal tube can be bent by using spring bender?
(A) G.I tube
(B) Copper tube
(C) Brass tube
(D) Steel tube
Correct Answer : B

(24). What is the name of part marked as ‘X’ in a portable hand operated pipe
bender?

(A) Inside former

(B) Pipe stop lever
(C) Pipe bend wheel
(D) Stop lever
Correct Answer : A
(25). What is the name of part marked as ‘X’ in the die stock?

(A) Pipe guide lever

(B) Die setting lever
(C) Adjustment lever
(D) Top piece tightening lever
Correct Answer : C

(26). What does the plumbing symbol refer?

(A) Outlet up
(B) Double sweep
(C) Outlet Down
(D) Side outlet
Correct Answer : A

(27). What is the working pressure usually made on joints for pressure test?
(A) 5 Kg/cm²
(B) 6 Kg/cm²
(C) 8 Kg/cm²
(D) 10 Kg/cm²
Correct Answer : D

(28). What is the reason for drop in gauge pressure during pressure testing of
flare joint?
(A) Leak
(B) Buckle
(C) Dent
(D) Bent
Correct Answer : A
(29). What is the name of part marked as ‘X’?

(A) Block
(B) Flaring bar
(C) Adaptor
(D) Flaring
Correct Answer : C
(30). What is the name of part marked as ‘X’?

(A) Grooved rollers

(B) Cutting wheel
(C) Reamer blade
(D) Tightening knob
Correct Answer : B
(31). What is the part marked as ‘X’?

(A) Yoke
(B) Base
(C) Clamp
(D) Movable collar
Correct Answer : D

(32). What does the plumbing symbol refer?

(A) Roll rim bath
(B) Slop sink
(C) Shower head
(D) Plain kitchen sink
Correct Answer : C

(33). Why die cutter one end is chamfered?

(A) For easy alignment
(B) Easy to assemble before threading
(C) To adjust slight misalignment
(D) To provide space for lubrication
Correct Answer : B

(34). What is the name of pipe fitting?

(A) Plug or cap

(B) Joint / socket
(C) Union unscrewed
(D) Reducer, concentric
Correct Answer : A

(35). What is the largest diameter of pipe that can be held in chain pipe vice?
(A) 125 mm
(B) 150 mm
(C) 175 mm
(D) 200 mm
Correct Answer : D

(36). What is the part marked as ‘X’?

(A) Tube
(B) Clamp
(C) Base plate
(D) Radius collar
Correct Answer : B

(37). What is the name of flared fitting?

(A) Flared tee fitting

(B) Cross
(C) Elbow
(D) Flared union coupling
Correct Answer : B
(38). What is the name of die stock?

(A) Quick cut die stock

(B) Button pattern stock
(C) Ratchet type die stock
(D) Adjusting screw die stock
Correct Answer : B

(39). What is the recommended cutting angle of chisel to chip in cast iron?
(A) 37.5°
(B) 55°
(C) 60°
(D) 90°
Correct Answer : C

(40). Which tool is used to clean and sharpen the jaw of pipe wrench?
(A) Flat file
(B) Rasp file
(C) Triangular file
(D) Half round file
Correct Answer : C

(41). What is the flare defect?

(A) Flare too large

(B) Flare is uneven
(C) Flare too small
(D) Flare has burrs on edge
Correct Answer : C

(42). What is the flare defect?

(A) Flare too large

(B) Flare is uneven
(C) Flare too small
(D) Flare has burrs on edge
Correct Answer : A

(43). How will you widen the gap between the jaws in a pipe wrench?
(A) Adjust the nut upwards
(B) Adjust the nut downwards
(C) Adjust the nut towards left
(D) Adjust the nut towards right
Correct Answer : B

(44). What is the name of joint?

(A) Collar joint

(B) Socket and spigot joint
(C) Expansion joint
(D) AC pipe joint
Correct Answer : D

(45). Which size of pipes are bent by cold bending method by using radius collar
bending unit?
(A) Up to 20 mm dia
(B) Up to 18 mm dia
(C) Up to 15 mm dia
(D) Up to 14 mm dia
Correct Answer : A

(46). What is the name of joint?

(A) Collar joint

(B) AC pipe joint
(C) Flexible joint
(D) Screwed joint
Correct Answer : D
(47). What is the name of symbol as per I.S?

(A) Hose tack

(B) Plain kitchen sink
(C) Double unit sink
(D) Stair
Correct Answer : B

(48). Which is the method to bend PVC pipe?

(A) Cold method
(B) Hot method
(C) Using bending machine
(D) Chilling method
Correct Answer : B

(49). What is the use of sawing fixture?

(A) To hold the job
(B) To cut the job
(C) To more the job
(D) To guide the tool
Correct Answer : D

(50). What is the name of part marked as ’X’?

(A) Roller wheel

(B) Cutting wheel
(C) Moving wheel
(D) Fixed wheel
Correct Answer : B
 ITI Plumber 1st Year Module 4 Plumber PVC pipe fitting

(1). What is the name of portion marked as ‘X’?

(A) Weep holes

(B) Infiltration gallery
(C) River
(D) Flow of ground water
Correct Answer : B

(2). What is the name of joint that has threads on both sides of the central piece?
(A) Barrel nipple
(B) Double nipple
(C) Reducer
(D) Socket
Correct Answer : B
(3). What is the name of part marked as ‘X’ in PVC flanged joint?

(A) Metal flange

(B) Rubber gasket
(C) PVC vane
(D) Tail piece
Correct Answer : B

(4). What is the use of collar joint?

(A) Joining big dia concrete and asbestos pipes
(B) Used for connecting small dia GI pipes
(C) Used for laying pipe on curved surface
(D) It can withstand vibration and shocks
Correct Answer : A

(5). What is the size of trench width for PVC pipes?

(A) O.D of pipe + 30 cm
(B) O.D of pipe + 28 cm
(C) O.D of pipe + 26 cm
(D) O.D of pipe + 25 cm
Correct Answer : A

(6). Why the space is left between the socket base and spigot end in the
expansion joint?
(A) Permit the rubber gasket to seat properly
(B) Allow free movement under temperature variation
(C) Permit lubrication media to pass through
(D) To adjust slight misalignment
Correct Answer : B

(7). Which ‘time parameter’ for joint to get cooled and free from physical stresses
in poly fusion welding?
(A) Hardening time
(B) Connection time
(C) Adoption time
(D) Warming up time
Correct Answer : A

(8). Which bicarbonates are the reason for temporary hardness of water?
(A) Sulphates
(B) Calcium and magnesium
(C) Chlorides
(D) Nitrates
Correct Answer : B
(9). What is the name of component used in boring tube wells?

(A) Strainer pipe

(B) Blind pipe
(C) Casing pipe
(D) Auger
Correct Answer : D
(10). What is the name of arrangement in water supply system?

(A) Pumping system

(B) Gravity system
(C) Dual system
(D) Continuous system
Correct Answer : A
(11). Identify the method of drilling tube wells?

(A) Rotary drilling

(B) Core drilling
(C) Percussion drilling
(D) Boring
Correct Answer : A
(12). What is the name of portion marked as ‘X’?

(A) Jack well

(B) Infiltration well
(C) Intake well
(D) Inspection well
Correct Answer : A

(13). What is done prior to fixing the PVC pipes on wall with wooden plugs and
clamps?
(A) Check for proper size
(B) Clean the pipes internally
(C) Align the pipes
(D) Check the accessories
Correct Answer : C
(14). What is the purpose of reducer in the pipe line?
(A) Connect two pipes of same dia
(B) Connect two pipes of different dia
(C) Connect one length to another
(D) Used for short extension of plumbing line
Correct Answer : B

(15). Which process works on the principle of diffusion in water softening

treatment?
(A) Demineralisation process
(B) Reverse osmosis process
(C) Lime soda process
(D) Zeolite process
Correct Answer : B

(16). Which process is used to remove the calcium and magnesium in hard water?
(A) Lime soda process
(B) Zeolite process
(C) Demineralisation process
(D) Reverse osmosis process
Correct Answer : B
(17). What is the name of part marked as ‘X’ in gas heated operated type
welding?

(A) Heat exchanger coil

(B) Gas supply
(C) Fuel heating gas inlet
(D) Hot gas nozzle
Correct Answer : C
(18). What is the name of pipe special fitting?

(A) Nipple
(B) Socket
(C) Branch tee
(D) Socket/spigot
Correct Answer : D

(19). Which gas is used to heat the torches in gas heated operated type welding?
(A) Butane
(B) Acetylene
(C) Methylene
(D) Ethylene
Correct Answer : A

(20). Which meter is used to measure the colour of water?

(A) Thermometer
(B) Tinto meter
(C) Monometer
(D) Hydrometer
Correct Answer : B

(21). What is the temperature range of heating tools used in plastic welding
process?
(A) 50 to 100°C
(B) 200 to 370°C
(C) 400 to 470°C
(D) 600 to 670°C
Correct Answer : B

(22). What is the name of pipe special fitting?

(A) Elbow
(B) Nipple
(C) Branch
(D) Socket
Correct Answer : D

(23). Which is the system of water distribution?

(A) Radial system

(B) Grid iron system
(C) Circle or ring system
(D) Tree or dead end system
Correct Answer : D

(24). Which is back filling material shall used for frenches to lay on PVC pipes?
(A) Sand
(B) Clay
(C) Cement
(D) Jelly
Correct Answer : A

(25). What is the main criteria for fixing a booster pump?

(A) Excess pressure
(B) Insufficient pressure
(C) High suction head
(D) Large supply line
Correct Answer : B

(26). How much gap is allowed from the end of pipe after 15° chamfering in ring
seal joint?
(A) 10 mm
(B) 12 mm
(C) 14 mm
(D) 15 mm
Correct Answer : A

(27). What is the desirable temperature of portable water?

(A) 5°C
(B) 6°C
(C) 8°C
(D) 10°C
Correct Answer : D

(28). Which pipe is used for carrying cold water?

(A) PVC pipe
(B) Steel pipe
(C) Copper pipe
(D) Lead pipe
Correct Answer : A

(29). Name the method of drilling tube wells?

(A) Rotary drilling

(B) Core drilling
(C) Percussion drilling
(D) Boring
Correct Answer : B

(30). What is the size of waste fitting in a bath tub?

(A) 40 mm
(B) 50 mm
(C) 60 mm
(D) 70 mm
Correct Answer : A

(31). What is the use of CI traps?

(A) Discharge the cleaning water
(B) Prevent foul air passing in to building
(C) Permit the water to flow freely
(D) Easy to clear the blockage
Correct Answer : B

(32). Which is the advantage of water supply in intermittent system?

(A) Water can be supplied to high level areas
(B) Water has to be stored for non supply hours
(C) Size of the pipes are required to be larger
(D) Size of the pipes are not required to be larger
Correct Answer : A

(33). What is the function of water hammer arrester?

(A) Release excess pressure
(B) Provide cushioning of air to absorb momentum
(C) Regulate water flow
(D) Increase the pressure
Correct Answer : B
(34). What is the size of concrete weep holes constructed in the infiltration
galleries?
(A) Size 3x10 cm
(B) Size 5x10 cm
(C) Size 7x10 cm
(D) Size 10x10 cm
Correct Answer : B

(35). What is the name of trap?

(A) S trap
(B) P trap
(C) Q trap
(D) Floor trap
Correct Answer : B

(36). Which is the process of water softening treatment works based on ion-
exchange process?
(A) Lime soda process
(B) Reverse osmosis process
(C) Zeolite process
(D) Demineralization process
Correct Answer : C

(37). What is the length of pipe projection required from the vice while threading
GI pipes?
(A) 100-125 mm
(B) 125-150 mm
(C) 150-200 mm
(D) 150-250 mm
Correct Answer : D

(38). Which material is used to make ferrules in dual system of treated water
supply?
(A) Lead
(B) Steel
(C) Brass
(D) Bronze
Correct Answer : C
(39). What is the name of component?

(A) Water hammer arrester

(B) Air valve
(C) Pressure gauge
(D) Poppet valve
Correct Answer : A

(40). Which type of joint is suitable for joining large size of PVC pipes with valve?
(A) Flare joint
(B) Flanged joint
(C) Brazed joint
(D) Compression joint
Correct Answer : B

(41). What is the natural colour of zeolite?

(A) Red
(B) Green
(C) Blue
(D) Yellow
Correct Answer : B

(42). What is the cause of permanent hardness in the water?

(A) Bicarbonates of calcium
(B) Clay, silt
(C) Sulphates, chlorides
(D) Garbage
Correct Answer : C

(43). Which has an exterior pipe thread end and used for fitting in the socket?
(A) Bend
(B) Elbow
(C) Tee
(D) Plug
Correct Answer : D
(44). What is the name of part marked as X ?

(A) River
(B) infiltration wells
(C) Jack well
(D) Shallow well
Correct Answer : C

(45). Which fitting is used to connect one length to another for continuation of
the pipe?
(A) Tee
(B) Reducer
(C) Socket
(D) Elbow
Correct Answer : C

(46). Which is the process of water softening treatment works based on ion-
exchange process?
(A) Lime soda process
(B) Reverse osmosis process
(C) Zeolite process
(D) Demineralization process
Correct Answer : C

(47). What is the minimum depth for deposit of sand and porous material above
the river bed to get filtered water?
(A) 3 meters
(B) 4 meters
(C) 5 meters
(D) 6 meters
Correct Answer : A

(48). Where the water hammer arresters are required?

(A) Near pressure release valve
(B) Near air valve
(C) On all fast closing valves
(D) Near NRV
Correct Answer : C

(49). What is the maximum temperature CPVC pipes can withstand heat?
(A) 140°F
(B) 160°F
(C) 170°F
(D) 190°F
Correct Answer : D
(50). What is the name of pipe fitting?

(A) Bend
(B) Offset
(C) Double bend
(D) Reducer elbow
Correct Answer : B
 ITI Plumber 1st Year Module 5 Piping system

(1). Which tool is used to fill the lead in Cl collar joint?

(A) Chisel
(B) Caulking tool
(C) Trowel
(D) Screw driver
Correct Answer : B

(2). What is the use of Hatchet type soldering iron?

(A) Used for straight soldering joint
(B) Used for angular soldering joint
(C) Used for light metals
(D) Used for heavy metals
Correct Answer : A

(3). What material is used to manufacture AC pipes?

(A) Asbestos fibre, clay, lime
(B) Asbestos fibre, Cement and silica
(C) Asbestos fibre, lime and cement
(D) Asbestos fibre, silica and lime
Correct Answer : B
(4). Which pipe fitting is used to connect two pipes of different diameters at an
angle of 90°?
(A) Coupling
(B) Reducer coupling
(C) Reducer elbow
(D) Reducer tee
Correct Answer : C

(5). What is the use of NP1 hummed pipes?

(A) For drainage use
(B) For gravity mains
(C) For pumping mains
(D) For high pressure
Correct Answer : A

(6). Which joint is used in temporary pipe lines?

(A) Flanged joint
(B) Collar joint
(C) Expansion joint
(D) Bell and spigot joint
Correct Answer : A

(7). Which pipe has the property of brittleness?

(A) Mild steel
(B) Polyvinyl chloride
(C) Asbestos cement
(D) Steel
Correct Answer : C

(8). What is the name of joint?

(A) Collar joint

(B) AC pipe joint
(C) Flexible joint
(D) Screwed joint
Correct Answer : A

(9). Why sewer pipes are not usually laid directly on the soil in the trenches?
(A) Life of pipe increase
(B) Diameter of pipe changes
(C) Alignment of pipe changes
(D) Life of pair decrease
Correct Answer : C

(10). Which makes the expansion joint water tight?

(A) Solvent cement
(B) Elastic rubber
(C) Hemp yarn
(D) Molten lead
Correct Answer : B

(11). What is the name of part marked as ‘X’?

(A) Tee
(B) Cross
(C) Elbow
(D) Coupling
Correct Answer : A
(12). Which type of flux is used for soldering steel sheets?
(A) Resin
(B) Zinc chloride
(C) Hydrochloric acid
(D) Ammonium chloride
Correct Answer : D

(13). What is the advantage of flux?

(A) Provide better appearance
(B) Provide smooth surface
(C) Promotes better joint
(D) Increase the strength
Correct Answer : C

(14). What are the metallic elements of solder?

(A) Lead and Tin
(B) Lead and Copper
(C) Lead and Zinc
(D) Copper and Tin
Correct Answer : A

(15). What is the movement of socket end in an expansion joint while the pipe
expands?
(A) No movements
(B) Moves backward
(C) Moves forward
(D) Both end moves
Correct Answer : C

(16). Which type of joints are used for the pipes subjected to severe changes in
temperature?
(A) Flanged joints
(B) Expansion joints
(C) Screwed joints
(D) Adhesive joints
Correct Answer : B

(17). Identify the type of pipe bedding given below.

(A) Concrete bedding

(B) Creating shaped to fit pipe
(C) Curating shaped to fit
(D) Earth cushion
Correct Answer : A

(18). Which pipe is banned in many countries due to health ground?

(A) Steel
(B) Cast iron
(C) Asbestos cement
(D) Galvanised iron
Correct Answer : C

(19). What is the advantage of concrete pipes?

(A) Problem of corrosion is not there
(B) They can withstand high pressure
(C) Easy to repair
(D) Easy to transport them
Correct Answer : A

(20). What is the type of pipe bedding shown below?

(A) Concrete bedding

(B) Creating shaped to fit pipe
(C) Curating shaped to fit
(D) Earth cushion
Correct Answer : D
(21). What is the name of pipe fitting?

(A) Union
(B) Coupling
(C) Tee
(D) Reducer
Correct Answer : A

(22). What is the test pressure of P1 class hummed pipes?

(A) 10 m head
(B) 20 m head
(C) 30 m head
(D) 40 m head
Correct Answer : B

(23). What type of joint is made in cast iron pipe?

(A) Socket and spigot
(B) Solvent cement
(C) Screwed
(D) Adhesive
Correct Answer : A
(24). Which type of pipe cannot be laid in exposed conditions?
(A) Steel pipe
(B) Cast iron pipe
(C) Asbestos cement pipe
(D) Galvanized iron pipe
Correct Answer : C

(25). Which type of joint is to be avoided to bear vibration or deflection of pipes?

(A) Collar joint
(B) Rubber ring joint
(C) Expansion joint
(D) Flanged joint
Correct Answer : D
 ITI Plumber 1st Year Module 6 Pumps PVC joints

(1). What is the TPI of 4” diameter pipe?

(A) 8 TPI
(B) 10 TPI
(C) 12 TPI
(D) 14 TPI
Correct Answer : A

(2). Which pump has a piston that moves in a cylinder for pumping?
(A) Centrifugal pump
(B) Reciprocating pump
(C) Rotary pump
(D) Booster pump
Correct Answer : B

(3). What is the name of PVC pipe joint?

(A) Flanged joint

(B) Rubber ring joint
(C) Collar joint
(D) Screwed joint
Correct Answer : A

(4). Which pump is used in pneumatic pressure system?

(A) Jet pump
(B) Centrifugal pump
(C) Reciprocating pump
(D) Booster pump
Correct Answer : C

(5). Which is the softest of heavy metal?

(A) Brass
(B) Copper
(C) Lead
(D) Tin
Correct Answer : C

(6). What is the angle of BSP pipe thread?

(A) 55°
(B) 60°
(C) 65°
(D) 50°
Correct Answer : A
(7). What is the advantage of mono block pump set?
(A) Decreased dimension and weight
(B) Increased dimension and weight
(C) No need of primary
(D) No suction limit
Correct Answer : A

(8). What is the suction limit of a centrifugal pump?

(A) 8.5 metres
(B) 7.9 metres
(C) 9.7 metres
(D) 5.8 metres
Correct Answer : B

(9). What is the minimum depth of trench for laying PVC pipe?
(A) 90 cm
(B) 80 cm
(C) 70 cm
(D) 60 cm
Correct Answer : A

(10). What is the maximum suction depth of an airlift pump?

(A) 6 meter
(B) 8 meter
(C) 80 meter
(D) 150 meter
Correct Answer : D

(11). Which pumps are called as vacuum pumps?

(A) Displacement pumps
(B) Centrifugal pumps
(C) Air lift pumps
(D) Booster pumps
Correct Answer : A

(12). What is the property of aluminium?

(A) Soft, ductile
(B) High tensile strength
(C) Brittle
(D) Resist wear and tear
Correct Answer : A

(13). Which pumps out water contained mud, silt etc?

(A) Air lift pump
(B) Reciprocating pump
(C) Rotary pump
(D) Compressor pump
Correct Answer : D
(14). What is meant by TPI screw thread?
(A) Trace Per Inch
(B) Thread Per Inch
(C) Throw Per Input
(D) Thought Per Input
Correct Answer : B

(15). Where the impeller is mounted in a pump?

(A) Hub
(B) Suction pipe
(C) Casing
(D) Shaft
Correct Answer : D

(16). Which pump consists of more than one impeller?

(A) Reciprocating pump
(B) Stage pump
(C) Impulse pump
(D) Rotary pump
Correct Answer : B
(17). What is the name of part marked as X ?

(A) Bolt and nut

(B) PVC service saddle
(C) Metallic ferrule
(D) Sealing ring gasket
Correct Answer : C

(18). What pump is used for small discharge and high pressure head?
(A) Centrifugal pump
(B) Air lift pump
(C) Rotary pump
(D) Submersible pump
Correct Answer : C

(19). Which distribution system is used for water pumped directly to mains from
the treatment plant behind the hill?
(A) Gravity system
(B) Pumping system
(C) Dual system
(D) Radial system
Correct Answer : A

(20). Which distribution system is used for the source of water carried to the
treatment plant through pipes and earthen channel to elevated reservoir?
(A) Gravity system
(B) Pumping system
(C) Dual system
(D) Radial system
Correct Answer : C

(21). Which pump is operated by compressed air?

(A) Reciprocating pump
(B) Rotary pump
(C) Air lift pump
(D) Booster pump
Correct Answer : C

(22). What is the disadvantage of a centrifugal pump?

(A) Electrical driven
(B) Need priming
(C) Easy to repair
(D) No suction limit
Correct Answer : B
(23). What is filling of water in the suction pipe to pump before pumping?
(A) Cranking
(B) Warming
(C) Priming
(D) Filling
Correct Answer : C

(24). Which type of screw thread is formed on pipes?

(A) BSP
(B) BSW
(C) BA
(D) BP
Correct Answer : A

(25). What is the cause of fuse blown off when motor starts?
(A) Intake screen is partially plugged
(B) Check valve stuck
(C) Low or high voltage
(D) Well water may be pumping
Correct Answer : C
 ITI Plumber 1st Year Module 7 Drainage system

(1). What is the type of effluent system?

(A) Manhole
(B) Septic tank
(C) Soak pit
(D) Cess pool
Correct Answer : C
(2). What is the name of trap?

(A) Floor trap

(B) Intercepting trap
(C) Nahani trap
(D) Bottle trap
Correct Answer : B

(3). Why the bottom of leaching cess pool made water tight?
(A) To accommodate more effluents
(B) To retain the sludge and sewage
(C) To filter solid waste
(D) To reduce toxic effect
Correct Answer : B
(4). What is the name of part marked as ‘X’?

(A) Floor trap

(B) Bottle trap
(C) Gully trap
(D) Running trap
Correct Answer : B

(5). What is the method of testing drainage line?

(A) Mirror test

(B) Ball test
(C) A lead slide or plug test
(D) Air test
Correct Answer : C

(6). What is the advantage of interceptors?

(A) Provide ventilation
(B) Prevent air pollution
(C) Filter the solid matters
(D) Prevent harmful bacteria entering to house drain
Correct Answer : D

(7). What is the minimum standard size of gully trap?

(A) 100 x 100
(B) 200 x 90
(C) 100 x 80
(D) 100 x 70
Correct Answer : A

(8). What is the cause of formation of fold and cracking in the hot bending process
of pipes?
(A) Wrong method
(B) Poor compaction of sand
(C) Faulty pipe bender
(D) Uniform heating not followed
Correct Answer : B

(9). How do disposed effluents from a septic tank?

(A) Waste pipe
(B) Jack well
(C) Soak pit
(D) Soil pipe
Correct Answer : C

(10). Identify the method of testing drainage line?

(A) Chemical smell test

(B) Air test
(C) Smoke test
(D) Ball test
Correct Answer : A
(11). What is the name of trap?

(A) Intercepting trap

(B) Multi floor trap
(C) Gully trap
(D) Bottle trap
Correct Answer : B

(12). What is the advantage of air testing?

(A) Low expense
(B) Needs more water
(C) Repairing easy
(D) Equal pressure distributes in all
Correct Answer : D

(13). Identify the X marked pipe line layout?

(A) Waste Pipe (WP)

(B) Rain Water Pipe (RWP)
(C) Soil Pipe (SP)
(D) Inspection Chamber (IC)
Correct Answer : A

(14). What is the distance from gully trap to an inspection chamber?

(A) 5 meter
(B) 6 meter
(C) 7 meter
(D) 8 meter
Correct Answer : B
(15). Which test is used for testing drainage lines connections above ground?
(A) Smoke test
(B) Air test
(C) Water test
(D) Mirror test
Correct Answer : A

(16). What for the water seal is provided in the gully trap?
(A) Prevents the foul gases entering
(B) Waste water entering freely
(C) To save quantity of water
(D) To prevent unwanted insects
Correct Answer : A
(17). What is the type of sewer system appurtenance?

(A) Soak pit

(B) Manhole
(C) Septic tank
(D) Inspection chamber
Correct Answer : B
(18). What is the purpose of an inspection chamber in a house drainage system?
(A) Maintenance
(B) Fire fighting
(C) Pumping
(D) Clogging
Correct Answer : A
(19). What is the name of trap?

(A) Intercepting trap

(B) Bottle trap
(C) Gully trap
(D) Nahani trap
Correct Answer : B
(20). What is the part marked as ‘X’ in Deacons waste water meter?

(A) Disc
(B) Rotating device
(C) Metallic pencil
(D) Drum fitted with graph paper
Correct Answer : C

(21). Which is done to seal the copper tubing to isolate the connection of pipes?
(A) C- clamps
(B) Screw clamps
(C) Parallel clamps
(D) Pinch the pipe end for brazing
Correct Answer : D

(22). Which trap have a high depth of water seal?

(A) Floor trap
(B) Gully trap
(C) Nahani trap
(D) Intercepting trap
Correct Answer : D

(23). What type of cover is required for an inspection chamber?

(A) Cast iron light cover
(B) Cast iron medium cover
(C) Cast iron heavy cover
(D) PVC cover
Correct Answer : A

(24). Which test is suitable for a new underground sewer pipes?

(A) Smoke test
(B) Water test
(C) Small test
(D) Air test
Correct Answer : B

(25). What is the size of vent pipe provided in a septic tank?

(A) 100mm
(B) 125mm
(C) 150mm
(D) 175mm
Correct Answer : A
 ITI Plumber 1st Year Module 8 Water supply system

(1). What is the name of valve?

(A) Globe valve

(B) Gate valve
(C) Check valve
(D) Pressure release valve
Correct Answer : B

(2). What is the rectification to solve inadequate pressure in multi storey building?
(A) Repaint the pipe periodically
(B) Replace the defective section of pipe
(C) Install one pipe throughout first to fourth floor
(D) Replace with variable size pipes as each size pipe for every floor
Correct Answer : D

(3). Which pump have the suction pipe and pressure in the inlet side?
(A) Submersible pump
(B) Jet pump
(C) Centrifugal pump
(D) Rotary pump
Correct Answer : B

(4). What is the test conducted in waste water pipe line?

(A) Water test

(B) Smell test
(C) Pneumatic test
(D) Chemical test
Correct Answer : C

(5). Which valve is used in high pressure applications?

(A) Sluice valve
(B) Globe valve
(C) Needle valve
(D) Float valve
Correct Answer : C

(6). Which valve allows only one direction flow?

(A) Check valve
(B) Globe valve
(C) Float valve
(D) Air valve
Correct Answer : A

(7). What is the advantage of sensor system used in urinal and wash basin?
(A) Save water
(B) Save manpower
(C) Save electricity
(D) Low cost
Correct Answer : A
(8). Which fitting is used for closing the end of a GI pipe?
(A) Plug
(B) Cap
(C) Socket
(D) Elbow
Correct Answer : B

(9). What is the name of the sanitary fitting?

(A) Madras pattern

(B) Europe pattern
(C) Orissa pattern
(D) Bombay type long pattern
Correct Answer : C

(10). Which type of tap is used in kitchen sink?

(A) Pillar tap
(B) Plug tap
(C) Bib tap
(D) Self closing tap
Correct Answer : C

(11). What is the name of drainage system?

(A) Two pipe system

(B) One pipe system
(C) Single stack system (Indian type)
(D) Single stack system (Western type)
Correct Answer : C

(12). Where is stop cock fitted in the pipe line?

(A) In between
(B) At the end
(C) Near gate valve
(D) Near air valve
Correct Answer : A

(13). Which dissolved impurities causes rotten egg odour?

(A) Oxygen
(B) Hydrogen
(C) Carbon-di-oxide
(D) Hydrogen sulphide
Correct Answer : D

(14). What is the standard height from floor to the top of the sink?
(A) 90cm
(B) 95cm
(C) 100cm
(D) 105cm
Correct Answer : A

(15). What is the advantage of waterless urinals?

(A) Save water
(B) Save Electricity
(C) Easy for maintenance
(D) Easy installation
Correct Answer : A
(16). What is the name of the pipe fitting?

(A) Coupling
(B) Elbow
(C) Tee
(D) Union
Correct Answer : A
(17). What is the name of piping system adopted in plumbing of drainage?

(A) One pipe system

(B) Two pipes system
(C) Single stack system (western type)
(D) Partially ventilated single stack system
Correct Answer : C
(18). What is the name of part marked as ‘X’?

(A) Inlet pipe

(B) Overflow
(C) Lightening arrestor
(D) Water level indicator
Correct Answer : C

(19). What is the outside diameter of 1” G.I pipe?

(A) 20.96 mm
(B) 26.44 mm
(C) 33.25 mm
(D) 41.91 mm
Correct Answer : C

(20). How the size of bib taps are designated?

(A) Nominal bore of the pipe to fix the tap
(B) Outer diameter of the pipe to fix the tap
(C) Outer diameter of the inlet of the tap
(D) Weight of the tap
Correct Answer : A

(21). Which valve is fixed in the dead ends of distribution system for washing out?
(A) Scour valve
(B) Check valve
(C) Non - return valve
(D) Ball valve
Correct Answer : A
(22). What is the name of part marked as ‘X”?

(A) Mixer tap

(B) Bib tap
(C) Push tap
(D) Plug tap
Correct Answer : A
(23). What is the repairing work sequence is given in the figure?

(A) Removing bonnet from water tap

(B) Inspecting washer
(C) Unscrew washer nut
(D) Replacing repaired bonnet
Correct Answer : B
(24). What is the name of part marked as ‘X’?

(A) Inlet pipe

(B) Overflow
(C) Scour outlet
(D) Water level indicator
Correct Answer : B
(25). What is the type of water tank?

(A) Sump
(B) Over head tank
(C) Horizontal cylindrical tank
(D) Rotational moulded polyethylene storage tank
Correct Answer : D
(26). What is the name of valve?

(A) Butterfly valve

(B) Gate valve
(C) Mud valve
(D) Globe valve
Correct Answer : C
(27). What is the name of part marked as X ?

(A) Stopper
(B) Operating rod
(C) Stuffing box unit
(D) Tail piece
Correct Answer : C

(28). Which type of fitting is used while laying pipes for service connection?
(A) Cast iron pipe
(B) PVC saddles
(C) Steel pipe
(D) Wrought iron pipe
Correct Answer : B
(29). What is the part marked as ‘X’ in water tap?

(A) Valve seat

(B) Spindle
(C) Packing washer
(D) Disc holder
Correct Answer : C
(30). Which pipe line is connected to storm water sewer in the layout of drainage
system?

(A) Ventilation pipe

(B) Waste pipe
(C) Sanitary pipe
(D) Rain water pipe
Correct Answer : D

(31). What is the another name for water tap?

(A) Bib cock
(B) Stop cock
(C) Angle cock
(D) Finish cock
Correct Answer : A

(32). What is the remedy to rectify the leakage of water in stuffing box?

(A) Tighten the gland nut

(B) Shut off the water supply
(C) Open main gate valve
(D) Replace packing material
Correct Answer : D

(33). Which is used in a cast iron bell and spigot joint?

(A) Union
(B) Socket
(C) Solvent cement
(D) Hemp yarn
Correct Answer : D

(34). What is the name of part marked as X ?

(A) Pipe shoe apron

(B) Metal shoe gutter
(C) Wall plate steel
(D) Swan neck pipe
Correct Answer : A
(35). What is the name of part marked as ‘X’?

(A) Coupling
(B) Elbow
(C) Reducer
(D) Extension nipple
Correct Answer : D

(36). Which controls the unauthorised connection in pipe line?

(A) Less water pressure
(B) Metering supply system
(C) Bad joints and connection
(D) Increase water pressure
Correct Answer : B

(37). Where the air relief valve is fixed in the pipe line?
(A) At the lowest point
(B) At the end of pipe line
(C) At the highest point
(D) At the depressions
Correct Answer : C

(38). What is the name of part marked as ‘X’?

(A) Tee
(B) Cross
(C) Reducer
(D) Elbow
Correct Answer : C

(39). What is the name of drainage system?

(A) Two pipe system

(B) One pipe system
(C) Single stack system
(D) Partially ventilated single stack system
Correct Answer : A
(40). What is the name of sanitary fitting?

(A) Water less urinal

(B) Corner urinal
(C) Stall urinal slope
(D) Sensor urinal
Correct Answer : C

(41). What is the name of valve?

(A) Air relief valve
(B) Drain valve
(C) Plug valve
(D) Pressure relief valve
Correct Answer : D

(42). Which dissolved impurities cause mottled enamel of teeth in contaminated

well water?
(A) Sodium Bicarbonate
(B) Calcium carbonate
(C) Sodium fluoride
(D) Sodium chloride
Correct Answer : C

(43). Which valve allows unobstructed flow?

(A) Stop cock
(B) Globe valve
(C) Check valve
(D) Sluice valve
Correct Answer : D

(44). What is the instrument to find out the quantity of flow through pipe line?
(A) Odometer
(B) Anemometer
(C) Clinometer
(D) Water meter
Correct Answer : D

(45). What is the name of part marked as ‘X’?

(A) Check valve

(B) Gate valve
(C) Plunger valve
(D) Needle valve
Correct Answer : C
(46). What is the test to check the straightness of sewer pipe by placing a lamp at
its one end and other end by reflection of the light?
(A) Smoke test
(B) Air test
(C) Water test
(D) Mirror test
Correct Answer : D

(47). What is the packing material used in the stuffing box?

(A) Rubber washer
(B) Leather gaskets
(C) Asbestos rope
(D) Cotton thread
Correct Answer : C

(48). Which type of washer to be used in hot water tap?

(A) Rubber washer
(B) Fiber washer
(C) Metal washer
(D) Leather gasket
Correct Answer : B
(49). What is the pipe appurtenance?

(A) Air valve

(B) Hydraulic valve
(C) Air receiver
(D) Air compressor
Correct Answer : A
(50). What is the name of part marked ‘X’?

(A) Bib cock

(B) Globe valve
(C) Gate valve
(D) Cross
Correct Answer : B
 ITI Plumber 1st Year Module 9 Tank installation and Maintenance

(1). What for chilling carried after bending in pipe?

(A) Cool the pipe after hot bending
(B) Empty the pipe after hot bending
(C) Fill the pipes before bending
(D) Hold the pipes in bending machine
Correct Answer : A

(2). What is the type of leak test equipment in pipes?

(A) Hydro tester

(B) Manotester
(C) Smoke generator
(D) Pungent chemical container
Correct Answer : C

(3). Why dry sand is filled before bending the pipe by hot bending method?
(A) Preventing the tube from cracking
(B) Preventing the tube from lengthening
(C) To avoid colour change
(D) To avoid formation
Correct Answer : A

(4). What is the name of water heater?

(A) Kitchen water heater

(B) Horizontal water heater
(C) Solar water heater
(D) Tank type water heater
Correct Answer : A

(5). What is the diameter of the fire hose nozzle?

(A) 25 mm
(B) 28 mm
(C) 32 mm
(D) 40 mm
Correct Answer : B

(6). What is the symbol?

(A) Water meter

(B) Safety valve
(C) Fire extinguisher
(D) Hot water cylinder
Correct Answer : C
(7). What is template in pipe bending?
(A) Pipe heating device
(B) Pipe bending machine
(C) Pipe cooling device
(D) Pattern for bending
Correct Answer : D

(8). What is the procedure to prevent crushing or bulging of pipe while hot
bending?
(A) Compacting, plugging, filling, heating
(B) Filling, compacting, plugging, heating
(C) Heating, filling, compacting, plugging
(D) Plugging, filling compacting, heating
Correct Answer : B

(9). How much internal pressure can withstand in a brass pillar tap?
(A) 10 Kg/cm²
(B) 20 Kg/cm²
(C) 30 Kg/cm²
(D) 50 Kg/cm²
Correct Answer : B
(10). What is the type of heating system?

(A) Solar water heater

(B) Forced circulation water heater
(C) Hot air industrial process heat system
(D) Solar process steam system
Correct Answer : B
(11). What is the name of pipe special fitting?

(A) Cross
(B) Nipple
(C) Branch
(D) Branch Tee
Correct Answer : D
(12). What is the part marked as ‘X’?

(A) Sensor
(B) Collector
(C) Controller
(D) Heat exchanger
Correct Answer : B
(13). What is the symbol?

(A) Wall hung urinal

(B) Indian type water closet
(C) Corner hung urinal
(D) European type water closet
Correct Answer : A

(14). What is the name of symbol?

(A) Turning down/away

(B) Turning up/towards
(C) Side outlet (outlet down)
(D) Side outlet (outlet up)
Correct Answer : D

(15). How many numbers of 4” PVC Tee’s required?

(A) 2
(B) 3
(C) 4
(D) 6
Correct Answer : B

(16). Which type of fire hydrant is installed in U.G chamber?

(A) Post hydrant
(B) Flush hydrant
(C) Water heater
(D) Fire engine
Correct Answer : B

(17). Which type of piping system uses one main vertical pipe through branch
pipes for carrying night soil as well as sullage?
(A) One pipe system
(B) Two pipes system
(C) Single stack system
(D) Partially ventilated single stack system
Correct Answer : A

(18). What is the reason for increased leakage in water supply system?
(A) Excess water pressure
(B) Perfect joints and connection
(C) Intermittent water supply
(D) Metering water connection
Correct Answer : A

(19). Which instrument used to measure temperature of red hot metals up to

3000°C?
(A) Thermostat
(B) Radiation pyrometer
(C) Joules meter
(D) Galvanometer
Correct Answer : B
(20). What is the IS code of practice for installation of septic tank?
(A) IS : 1742 : 1983
(B) IS : 5329 : 1983
(C) IS : 2470 : 1985
(D) IS : 3076 : 1985
Correct Answer : C

(21). What is the symbol?

(A) Safety valve

(B) Water meter
(C) Sluice valve
(D) Drain cock
Correct Answer : B

(22). What is the IS code of basic requirements for water supply, drainage and
sanitation?
(A) IS : 1172 : 1993
(B) IS : 1536 : 2001
(C) IS : 1537 : 1976
(D) IS : 1742 : 1983
Correct Answer : A

(23). What is the part marked as ‘X’?

(A) Back forward

(B) Hydraulic raw
(C) Pressure release valve
(D) Bleed screw
Correct Answer : C

(24). Which sanitary fitting prevents the passage of foul gases from the pipes to
the outside?
(A) Door bends
(B) Vent cowl
(C) Foot rest
(D) Traps
Correct Answer : D

(25). What is the name of symbol?

(A) Turning down/away

(B) Turning up/towards
(C) Side outlet (outlet down)
(D) Side outlet (outlet up)
Correct Answer : B
(26). What does the plumbing symbol indicates?

(A) Pressure gauge

(B) Temperature gauge
(C) Thermo pressure gauge
(D) Running trap
Correct Answer : B

(27). What is the estimated length of 4” PVC pipe?

(A) 3 metres
(B) 6 metres
(C) 10 metres
(D) 12 metres
Correct Answer : C

(28). Which is device used for tapping water from mains for fire fighting?
(A) Sluice valve
(B) Fire hydrant
(C) Fire extinguisher
(D) Fire engine
Correct Answer : B

(29). What is the cause for leakage in pipe line?

(A) Metering supply system
(B) Less water pressure
(C) Intermittent supply system
(D) Bad joints and connection
Correct Answer : D

(30). Which is used to magnify the noise to locate the leakage in pipe?
(A) Osmoscope
(B) Sonoscope
(C) Micro phone
(D) Decrease meter
Correct Answer : B
(31). What is the normal pressure head in the nozzle of the fire hose?
(A) 20 m
(B) 25 m
(C) 30 m
(D) 35 m
Correct Answer : D

(32). What is the name of symbol?

(A) Turning down/away

(B) Turning up/ towards
(C) Side outlet (outlet down)
(D) Side outlet (outlet up)
Correct Answer : C

(33). What is the size of smaller drain pipes for kitchen sink?
(A) Ø 32 mm
(B) Ø 34 mm
(C) Ø 36 mm
(D) Ø 38 mm
Correct Answer : C

(34). What is the type of heating system?

(A) Solar water heater

(B) Forced circulation water heater
(C) Hot air industrial process heat system
(D) Solar process steam system
Correct Answer : A

(35). How to repair damaged PVC pipe?

(A) PVC pipe cannot be repaired
(B) Clean and apply epoxy
(C) Cut the damaged part and join
(D) Replace the new pipe
Correct Answer : B

(36). What is filling in pipe bending?

(A) Cool the pipes after bending
(B) Dry fine silican sand
(C) Hold the pipes in template
(D) Hold the pipes in bending machine
Correct Answer : B

(37). What is the reason for water flow from the over flow the pipe of the cistern?
(A) Loose check nut
(B) Broken float
(C) Defective washer
(D) Worn out valve seat
Correct Answer : B
(38). What is the name of tool?

(A) Valve spindle

(B) Reseating tool
(C) Hand grinder
(D) Spindle assembly
Correct Answer : B
(39). What is the name of part marked ‘X’ in vent terminology?

(A) Cowl
(B) Trap
(C) Vent
(D) Basin
Correct Answer : A

(40). What is the remedy to remove accumulated air from water line?
(A) Check valve
(B) Sluice valve
(C) Air relief valve
(D) Pressure valve
Correct Answer : C

(41). What is the name of part marked as X ?

(A) Yoke
(B) Hand lever
(C) Movable collar
(D) Radius collar
Correct Answer : A

(42). Which tap is preferable while hot and cold water supply is available?
(A) Bib cock
(B) Stop cock
(C) Mixing tap
(D) Waste - not tap
Correct Answer : C

(43). How airlock in a pump can be removed?

(A) Fix foot valve
(B) Prime the pump
(C) Fix air valve
(D) Open outlet
Correct Answer : B

(44). How many number of 4”Elbows required?

(A) 1
(B) 2
(C) 3
(D) 4
Correct Answer : B
(45). What is the name of part marked as X ?

(A) Collector
(B) Controller
(C) Heat exchanger
(D) Sensor
Correct Answer : B

(46). How much is distance between fire hydrants provided along the roads?
(A) 50 to 100 meters
(B) 100 to 130 meters
(C) 150 to 200 meters
(D) 200 to 230 meters
Correct Answer : B

(47). How much a barrel of pillar hydrant is projected above the ground surface?
(A) 70 cm
(B) 50 cm
(C) 100 cm
(D) 120 cm
Correct Answer : A

(48). Which causes the corrosion in iron with hardness in water and red colour?
(A) Oxygen
(B) Hydrogen
(C) Nitrogen
(D) Hydrogen sulphide
Correct Answer : A

(49). Which is the water tap used in wash basin?

(A) Bib tap
(B) Waste not tap
(C) Pillar tap
(D) Stop cock
Correct Answer : C
(50). What is the name of sewer section?

(A) V - section
(B) U - section
(C) Semicircular section
(D) Rectangular section
Correct Answer : C