MOC3040, MOC3041, MOC3042, MOC3043
MOC3040X, MOC3041X, MOC3042X, MOC3043X
OPTICALLY COUPLED BILATERAL
SWITCH LIGHT ACTIVATED ZERO
VOLTAGE CROSSING TRIAC
2.54 Dimensions in mm
APPROVALS
z UL recognised, File No. E91231 1 6
Package Code " GG " or " TT " 7.0
6.0 2 5
'X' SPECIFICATIONAPPROVALS
z VDE 0884 in 3 available lead form : - 3 4
- STD 1.2
- G form
7.62 7.62
- SMD approved to CECC 00802 6.62 4.0
3.0
DESCRIPTION 13°
0.5
Max
3.0
The MOC304_ Series are optically coupled 0.26
isolators consisting of a Gallium Arsenide 0.5 3.35
infrared emitting diode coupled with a monolithic
silicon detector performing the functions of a
zero crossing bilateral triac mounted in a ABSOLUTE MAXIMUM RATINGS
standard 6 pin dual-in-line package. (25 °C unless otherwise noted)
FEATURES
z Options :- Storage Temperature -550C - +1500C
10mm lead spread - add G after part no. Operating Temperature -400C - +1000C
Surface mount - add SM after part no. Lead Soldering Temperature 2600C
Tape&reel - add SMT&R after part no. (1.6mm from case for 10 seconds)
z High Isolation Voltage (5.3kVRMS ,7.5kVPK )
z Zero Voltage Crossing
z 400V Peak Blocking Voltage
z All electrical parameters 100% tested INPUTDIODE
z Custom electrical selections available
Forward Current 50mA
APPLICATIONS Reverse Voltage 6V
z CRTs Power Dissipation 120mW
z Power Triac Driver (derate linearly 1.41mW/0C above 250C)
z Motors
z Consumer appliances OUTPUT PHOTO TRIAC
z Printers
Off-State Output Terminal Voltage 400V
OPTION SM OPTION G Peak Repetitive Surge Current
SURFACE MOUNT 7.62 (PW=100μs, 120pps) 1A
Power Dissipation 150mW
(derate linearly 1.76mW/0C above 250C)
0.6 POWER DISSIPATION
0.1 1.25 0.26
0.75
10.46 Total Power Dissipation 250mW
10.16 (derate linearly 2.94mW/0C above 250C)
9.86
ISOCOM COMPONENTS 2004 LTD
Unit 25B, Park View Road West,
Park View Industrial Estate, Brenda Road
Hartlepool, TS25 1UD England Tel:
(01429)863609 Fax : (01429) 863581 e-mail
sales@isocom.co.uk http://www.isocom.com
28/11/08 DB91048
ELECTRICAL CHARACTERISTICS ( TA = 25°C Unless otherwise noted )
PARAMETER MIN TYP MAX UNITS TEST CONDITION
Input Forward Voltage (VF) 1.2 1.4 V IF = 20mA
Reverse Current (IR) 10 μA VR = 6V
Output Peak Off-state Current ( IDRM ) 500 nA VDRM = 400V (note 1 )
Peak Blocking Voltage ( VDRM ) 400 V IDRM = 500nA
On-state Voltage ( VTM ) 3.0 V ITM = 100mA ( peak )
Critical rate of rise of
off-state Voltage ( dv/dt ) 600 1500 V/μs
Coupled Input Current to Trigger ( IFT )(note 2 )
MOC3040 30 mA VTM = 3V ( note 2 )
MOC3041 15 mA
MOC3042 10 mA
MOC3043 5 mA
Holding Current , either direction ( IH ) 400 μA
Input to Output Isolation Voltage VISO 5300 VRMS See note 3
7500 VPK See note 3
Zero Inhibit Voltage ( VIH ) 20 V IF= Rated IFT
Crossing MT1-MT2 Voltage
Charact- above which device
-eristic will not trigger
Leakage in Inhibited State ( IS ) 500 μA IF= Rated IFT
VDRM = Rated VDRM
Off-state
Note 1. Test voltage must be applied within dv/dt rating.
Note 2. Guaranteed to trigger at an IF value less than or equal to max. IFT , recommended IF lies
between Rated IFT and absolute max. IF .
Note 3. Measured with input leads shorted together and output leads shorted together.
28/11/08 DB91048m-AAS/A8
