CONSTRUCTION OF PROPOSED GUEST HOUSE IN PLOT # 69, BLOCK - D, RANGAPURI, NEW Delhi.

BILL OF QUANTITIES - SITE DEVELOPMENTS WORKS

S.NO DESCRIPTION QUANTITY UNIT RATE AMOUNT

(A) GENERAL CIVIL WORKS
GENERAL NOTES

The given rate is inclusive of all related

miscellaneous works like Housekeeping work,
Safety PPEs, Rest rooms, Debris removal Deep
cleaning etc to include for Costing and no extra
claim will be allowed

I FOUNDATION
1.1.0 EARTHWORKEXCAVATION&REMLLNG

Earthwork excavation in all kinds of soil strata

such as soft rock etc including all necessary
shuttering, necessary shoring, dressing of sides,
ramming of bottoms and bailing out water
wherever necessary. The cost to include the
back filling of excavated earth in foundation.
0.50m of working space will be allowed for
billing. al complete as per drawings,
specifications and / or as directed by the
engineer

1.1.1 Earth work excavation (Depth up to 1.50m) 500.00 Cum 225.00 112,500.00
Earth work excavation (Depth beyond 1.50m up
1.1.2 650.00 Cum 247.00 160,550.00
to 4.00m)

Providing and fixing Sheet pile shoring up to 4

meter & you may use must 6 meter full sheet.
Contractor should submit Shop drawing before
1.1.3 76.00 Rm 9950.00 756,200.00
execution, all complete as per specifications and
/
or as directed by the engineer

1.2.0 ANTITERMITE TREATMENT

Providing pre-constructional anti-termite

treatment, including supplying chemical
emulsion Chlorpyriphos emulsifiable
concentrate 20%, in sealed containers, and
applying it at 1% concentration by diluting
and injecting it, creating a continuous
chemical barrier under and all-round the column
1.2.1 pits, wall trenches basement excavation, top 260.00 Sqm 80.00 20,800.00
surface of plinth filling, junction of wal and floor,
along the external perimeter of building,
expansion joints over the top surface of
consolidated earth on which apron is to be laid,
surroundings of pipes and conduits, etc., all
complete as per specifications.(Treatment to be
covered by 10 years guarantee).

1.3.0 FILLING
 Supplying and filling sand, as directed, of
approved quality, under floors or in foundations
and plinth etc including cost of sand
transportation, all leads, loading, unloading,
spreading in layers at all depths, watering,
compacting to 90% max dry density or as
specified in drawing and as directed, as a
subgrade. all complete as per drawings,
specifications and / or as directed by the
engineer

1.3.1 M Sand Filling in Foundation/Plinth beam/Flooring 50.00 Cum 1490.00 74,500.00

1.3.2 Quarry Dust filling 10.00 Cum 1190.00 11,900.00

Earth filling in Basement using available
1.3.3 50.00 Cum 100.00 5,000.00
excavated earth
Earth filling in Basement using bought from
1.3.4 175.00 CUM 148.00 25,900.00
outside
1.4.0 PLAIN CEMENT CONCRETE (PCC)

Providing and laying Plain cement concrete

with Broken Granite 40mm and down size
graded stone aggregate and first quality M sand
mixed properly as leveling course, in
foundations, floorings and basement,
including placement and consolidation, but
excluding the use of shuttering as may be
required etc, complete in all depths and heights
as directed, all complete as per drawings
specifications and / or as directed by the
engineer

1.4.1 P.C.C 1:5:10 in Foundation 5.00 Cum 6778.00 33,890.00

1.4.2 P.C.C 1:4:8 in Foundation/Plinth beam/Flooring 50.00 Cum 7142.00 357,100.00
1.4.3 Supply & fixing of HDPE sheet below grade slab 300.00 Sqm 199.00 59,700.00

1.5.0 REINFORCED CEMENT CONCRETE (RCC)

Providing and laying cement concrete in

structure frame work M25 grade concrete by
cement, M sand and using 20 mm grade
aggregate in footings, pedestals, plinth beams,
columns, tie beams Grade Slab, pillars, piers,
abutments, posts, struts complete as directed
by the Engineer in-charge/ Consultant. Consider
minimum cement content of 400kg per cum (As
per design mix) including the cost of centering ,
shuttering , strutting, propping, removal of forms
and finishing but excluding reinforcement,
curing,finishing the top surface rough or smooth
as may be directed, all complete as per
drawings, specifications and / or as directed by
the engineer

Raft concrete (Basement pump

1.5.1 119.00 Cum 8955.00 1,065,645.00
room/Lift/Stack/DG) M-25
1.5.2 Lift Raft concrete M-25 3.00 Cum 8955.00 26,865.00
Column concrete up to Formed Ground level M-
1.5.3 18.00 Cum 9453.00 170,154.00
35
1.5.4 Plinth Beam concrete M-25 5.00 Cum 9453.00 47,265.00
beams
Horizontal 1.32
Vertical 2.16
1.00
Lift/Under ground basement walls/shear wall
1.5.5 105.00 Cum 9453.00 992,565.00
concrete M-35
1.5.6 Grade Slab concrete M-25 19.00 Cum 9453.00 179,607.00

viasiering wi‹n cemeni monar i:e \ i cemeni

e sana j wi n
approved " ROFFE - Hyguard EX" or "FOSROC" or
" SIKA “brush bond waterproofing compound
application on the outer concrete surface of
lift pit as per manufacturers specifications
1.6.0 including hacking the concrete surface brushing
cleaning, scaffolding curing etc., all complete
as per drawings, specifications and / or as
directed by the engineer . Note Contractor
should submit a warranty certificate for 10
years from the date of completion of the
water Dr0ofing work

Providing water proofing For Pump room

1.6.1 basement/lift/stack pit wal 840.00 Sqm 695.00 583,800.00
& floor

Providing and constructing Solid block

200mm tk in Cement Mortar 1:5 using uniform
size with true vertical and horizontal joints and to
plumb, not more than ten courses to be laid in a
day on any wall including providing
1.7.0 recesses,openings etc., the mortar joints of brick
work not more than 10mm thick, these joints to
be flush in block work below GL and including
curing the work etc. all complete as per
drawings, specifications and / or as directed by
the engineer

1.7.1 Up to Plinth level 8.00 Cum 16816.00 134,528.00

1.8.0 IRON AND STEEL WORK
 Supplying, fabricating and fixing in position
of all reinforcement conforming to Indian
standard GRADE OF STEEL Fe 550 (AS PER
IS 1786-2008)of approved brand (Tata or
Equivalent) for work including, wastage,
straightening, cleaning, bending to shape of
lengths as per details and drawings, binding
with 18 SWG black of double wired binding,
soft and annealed binding wire, placing with
proper cover blocks, providing and fixing
fanhooks etc. at complete as per drawings,
specifications and / or as directed by the
engineer

1.8.1 Steel Reinforcement for RCC 27.00 Mt 89550.00 2,417,850.00

TOTAL 7,236,319.00
11 STRUCTURE
2.1.0 REINFORCED CEMENT CONCRETE (RCC)

Providing and laying cement concrete in

structure frame work M25 grade concrete by
cement, M sand and using 20 mm grade
aggregate in columns, pillars, piers, posts,
struts, waist slab landing, roof slab & roof
beam, stringer beam with necessary provision
to fix the precast steps for staircase, Lintel,
Sunshade, Loft etc, Consider minimum cement
content of 400kg per cum (As per design mix)
including centering and shuttering,
reinforcement steel, but including, necessary
scaffolding, double height staging if required,
vibrating, curing, finishing the top surface
rough or smooth as may be directed. all
complete as per drawings specifications and /
or as directed by the engineer .

2.1.1 Column concrete - M35 40.00 Cum 9552.00 382,080.00

2.1.2 Lift Walls concrete M-35 28.00 Cum 9552.00 267,456.00
2.1.3 Roof Slab concrete -M25 245.00 Cum 8955.00 2,193,975.00
2.1.4 Roof Beam concrete -M25 130.00 Cum 8955.00 1,164,150.00
2.1.5 Staircase waist concrete - M25 13.00 Cum 8955.00 116,415.00
2.1.6 Lintel Concrete 21.00 Cum 8955.00 188,055.00
2.1.7 Toilet / Kitchen Counter concrete 18.00 Sqm 398.00 7,164.00
2.1.8 Siil slab Concrete for 40mm thick 70.00 Sqm 398.00 27,860.00
Parapet Top sill Concrete for 40mm thick x 200
2.1.9 75.00 Rm 100.00 7,500.00
mm width
2.1.10 Sunshade concrete for 75mm thick 25.00 Sqm 398.00 9,950.00

2.2.0 IRON AND STEEL WORK

 Supplying, fabrlcating and fixing in position
of all reinforcement
conforming to Indian standard GRADE OF
STEEL Fe 550 (AS PER IS 1786-2008)of
approved brand (Tata or Equivalent) for work
including, wastage, straightening, cleaning,
bending to shape of lengths as per details and
drawings, binding with 18 SWG black of double
wired binding, soft and annealed binding wire,
placing with proper cover blocks, providing
and fixing fanhooks etc. al complete as per
drawings, specifications and / or as directed by
the
enqineer

Steel Reinforcement for RCC ( from stilt to

2.2.1 60.00 Mt 89550.00 5,373,000.00
terrace)
2.3.0 AEROCON BLOCKS

Providing Aerocon block work of required

thickness in cement mortar 1:6 (1 part of
cement and 6 parts of coarse sand) of
approved quality and make. The rate includes
cost of necessary scaffolding, chips packing
between beam/ column and wall, mixing raking
of joints, lead & lift and curing etc., all
complete as per drawings, specifications and /
or as directed by the engineer ( from stilt to
terrace)

2.3.1 Aerocon blocks 600x200x200 mm thk 330.00 Cum 7960.00 2,626,800.00

2.3.2 Aerocon blocks 600x200x100 mm thk 700.00 Sqm 846.00 592,200.00

Providing brick work masonry of required

thickness in cement
mortar 1:6 (1 part of cement and 6 parts of
coarse sand) using red bricks of approved quality
and make with compressive strength 50
kg/sqcm, including cost of scaffolding and
curing all complete as per drawings ,
specifications and /or as directed by architect
/
enqineer

2.3.3 For staircase steps using bricks 10.00 Cum 7960.00 79,600.00

Providing Parapet level 3" thick band including

finishing with CM 1:3 all complete as per
2.3.4 80.00 Rm 672.00 53,760.00
drawings, specifications and / or as directed
by the engineer

2.3.5 Providing Column chamfering in Ground floor 120 Rm 40.00 4,800.00

Providing drip band in sunshades at all levels
2.3.6 including finishing 25.00 Rm 299.00 7,475.00
with CM 1:3
2.5.0 CEMENT PLASTERING
PLASTER TO CONCRETE SURFACES
 Providing and plastering of ceiling for slab,
beams & stair waist slab
using cement mortar 1:3 to the thickness of
12mm. The rate to be included of hacking the
concrete surfaces, cleaning, Button marking,
2.5.1 scaffolding, curing and surface shall be 1500.00 Sqm 398.00 597,000.00
smooth trowe finish as per standard
specifications. (from stilt floor to terrace) at
complete as per drawings, specifications and / or
as directed by the
enqineer

INTERNAL PLASTERING VERTICAL MASONRY

SURFACES

Providing and plastering of internal walls using

cement 1:5 to the thickness of 15mm. The rate
to be included of Electrical chasing groove
packing and fixing with Plaster mesh, Plaster
mesh fixing over brick work and concrete joints
in both direction ( vertical & horizontal),
2.5.2 3100.00 Sqm 378.00 1,171,800.00
scaffolding, hacking the concrete surface,
button marking, cleaning, curing and surface
shall be smooth trowel finish as per standard
specifications. ( from stilt to terrace) all complete
as per drawings, specifications and / or as
directed by the engineer

CEMENT PLASTER TO EXTERNAL SURFACES

Providing and plastering of external walls using

cement mortar 1:5 to the thickness of 20 mm
(with double coat of 12mm thick as first coat &
8mm thick as second coat ) The rate to be
included of with plaster mesh fixing over brick
work and concrete joints in both direction
( vertical & horizontal) water proof admixture,
scaffolding hacking the concrete surface,
2.5.3 1250.00 Sqm 448.00 560,000.00
button marking, curing, adding of water proof
admixture for both coat of plastering and surface
shal be sponge finish as per standard
specifications. ( from stilt to terrace) The cost
to include the grooves as per the architectura
elevation drg, all complete as per drawings,
specifications and / or as directed by the
engineer

2.50 GRANO FLOORING

Providing and laying Grano flooring 100 mm

average thickness in
C.C 1:2:4 using 6 mm size and downgraded hard
granite broken chips laid to proper slope over
2.5.1 P.C.C. The rate to include the groove and 440.00 Sqm 1493.00 656,920.00
broome finish,aII complete as per drawings
specifications and / or as directed by the
engineer (Car parking/stack area/Lift machine
room)
2.6.0 WEATHERING COARSE

Brick Bat Coba Waterproofing treatment to

terraces, roof surfaces & such other locations
as called for, by providing an even base layer of
minimum 20 mm thick cement mortar 1:4 with
coarse sand admixed with acrylic water proofing
compound, brick bats of size ranging from
40mm to 100mm laid with gaps of 10 to
15mm between them and grouted with
cement mortar 1:4 with coarse sand admixed
with acrylic waterproofing compound laid to
slope ol 1:12 or as specified and with a
protective coat of 20mm thick cement mortar
2.6.1 1:4 coarse sand admixed with acrylic water 280.00 Sqm 1684.00 471,520.00
proofing compound and finished neat in
squares of 600 X 600 mm Traetment to
vertical faces of parapets, walls, beams, etc.
with 20mm thick cement plaster 1:4 with
coarse sand admixed with acrylic
waterproofing compound and finished
neatly. (only horizontal treated areas shall be
measured for payment) The average
thickness shall be 120mm. The minimum
thickness at khurra shall be 80mm, lead, lift &
wastage etc. Complete all as directed by
Engineer in-charge/ Consultant

Supplying and laying of brick surki lime concrete

on roofs, average thickness of 100 mm laid to
fall with 25 mm nominal size brick aggregates
and 50 % lime mortar 1:2 (1 lime 2 brick
2.6.2 surki) rammed and finished with gur and QRO Cum 7000.00
belgiri including rounding of junction with
parapet wall etc., all complete as per
drawings specifications and / or as directed by
the engineer

Providing and fixing 200 x 200mm Pressed

clay tiles over the weathering coarse concrete,
the tiles should be laid with necessary slope as
required, the base mortar ratio 1:3 mixed
with water proofing compound. The rate to
include all the joints of the tiles should be
2.6.3 pointed using joint fillers mixed with red oxide & QRO Sqm 700.00
water proofing compound, required wall
chasing and touch up for the flashing tile,
lead, lift & wastage etc. all complete as per
drawings specifications and / or as directed by
the engineer .
Basic cost Rs. 25/ No

Same as above specification but Flashing Tile /

Haunch tile Laying all complete as per drawings,
2.6.4 QRO Rm 700.00
specifications and / or as directed by
the engineer
 Total 16,559,480.00

III TILING/GRANITE WORKS

Granite flooring in CM1:4 - (Basic rate for Granite

- Rs 225/sft
3.01
except gst) - (BF,SF,FF,SF,TF, FF & TF Lift lobby
area)

Providing and laying Granite flooring shall be

white or of any other colour and of a selected
best quality as approved by the Project
manager/ Consultant. The stone shall be hard,
close sound, dense uniform and homogeneous
in texture. They shall have even crystalline
grain and free from decay, weathering, flaws,
defects and cracks. The surface shall be
level and machine polished smooth to an even
and perfectly plane surface. All edges shall be
machine cut, true and square free from
chipping. The rear face shall be rough enough
to provide a good key for the mortar Granite
50.00 Sqm 4975.00 248,750.00
flooring with natural veins, if selected shall have
to be laid as per the pattern & size of the slab
given by the Project manager/ Consultant. Slabs
laid in cement mortar 1:4 bed mortar of 20mm
average with joint free . Also the cost should
includes the maximum thickness of mortor
required to maintain the finished floor level
Please ref drawing for finishing thickness. all
complete as per drawings, specifications and /
or as directed by the engineer . Cost including
wastage, lead lift of materials and cost of
necessary covering like POP / HDPE sheet after
laying etc,

3.02 Granite skirting in CM1:4 - 100 mm height

Specification same as above and the rate to be

quoted for granite skirting in CM1:4 using
approved quality . The rate to include the
skirting chipping, mortar packing and the 110.00 Rm 597.00 65,670.00
touch up above the skirting to match the
existing wall plaster level. (Basic rate for
Granite - Rs 225/sft)

Granite flooring for Staircase (Tread & landing )

3.03 (Basic rate
for Granite - Rs 225/sft except gst)
 Providing and laying polished 18/20mm thick
Granite stone of required size for Staircase
treads and landing of approved colour quality
and shade. The steps nosing should be pencil
rounded or shamferred or half round nosing as
required by Architect. And the steps should have
50mm wide flamed finish for anti-skidding or
3mm wide grooves 3 nos at 25mm spacing
for anti-skidding/ necessary groove cutting for
making flamming. Cost to be included of
required thickness of bed mortar of C.M 1:4 to
100.00 Sqm 5473.00 547,300.00
maintain the finished floor level. All the joints
to be grouted with epoxy grout matching
colour to flooring materials , necessary
grouting arrangement to hold the Balustrade of
handrail, Leading & lifting of all material,
required scaffolding, barrier, wastage of
material and required polishing and cleaning
after laid etc., Complete all as per Architectural
drawing & all complete as per drawings,
specifications and / or as directed by the
engineer .

3.04 Granite flooring for Staircase (Riser & Skirting )

Providing and laying polished 18/20mm thick

Granite stone of required size for Staircase
risers and skirting of approved colour quality
and shade. The skirting edge should be
shamferred or half round nosing with polished or
as required by Architect. Cost to be included of
required thickness of bed mortar of C.M 1:4 to
maintain the finished floor level. All the joints to
be grouted with epoxy grout matching colour 210.00 Rm 3483.00 731,430.00
to flooring materials , necessary grouting
arrangement to hold the Balustrade of handrail,
Leading & lifting of all material, required
scaffolding, barrier, wastage of material and
required polishing and cleaning after laid etc., all
complete as per drawings, specifications and /
or as directed by the engineer (Basic rate for
Granite - Rs 200/sft)

Granite wall in CM1:4 - (Basic rate for Granite

3.05 - Rs 225/sft
except gst) Lift Wall Facia
 Providing and laying Granite Lift wall Facia shall
be white or of any other colour and of a
selected best quality as approved by the
Project manager/ Consultant. The stone shall be
hard, close sound dense, uniform and
homogeneous in texture. They shall have even
crystalline grain and free from decay,
weathering, flaws, defects and cracks. The
surface shall be level and machine polished
smooth to an even and perfectly plane surface.
All edges shall be machine cut, true and square
free from chipping. The rear face shall be
rough enough to provide a good key for the
20.00 Sqm 5473.00 109,460.00
mortar Granite flooring with natural veins, if
selected shall have to be laid as per the pattern
& size of the slab given by the Project manager/
Consultant. Slabs laid in cement mortar 1:4 bed
mortar of 20mm average with joint free . Also the
cost should includes the maximum thickness of
mortor required to maintain the finished floor
level Please ref drawing for finishing
thickness. all complete as per drawings,
specifications and / or as directed by the
engineer . Cost including wastage, lead lift of
materials and cost of necessary covering like
POP / HDPE sheet after laying etc,

3.06 Granite Counter

Supplying and laying of Granite in CM 1:3 for

Kitchen / Toilel counter including fixing with
base RCC & required shuttering / Cuddapah 22.00 Sqm 6965.00 153,230.00
Slab (Basic rate for Granite - Rs 225/sft except
gst)

Vitrified tile flooring in CM 1:4 - (Basic rate for Tile -

3.07 Rs 75/sft except gst) Bedrooms, Living, Dining,
Kitchen & Dormitorty

Providing and laying vitrified tile of 4'0"x2'0"

size as shown In the
drawing for flooring of colour, quality as
approved by the Architect and the same is to be
laid by the finished floor level( FFL ). Cost should
include joints grouting with epoxy grouting
material of suitable shade tousing cement
mortor 1 : 4 of required thickness to match the
485.00 Sqm 1443.00 699,855.00
flooring material wherever required, wastage of
material lead lift of materials and, covering
after laying bymaintainusing polythene sheet
with POP, necessary cut outs for services etc.
required acid wash all complete as per
drawings, specifications and / or as directed by
the engineer . (from stilt to terrace). Except
office area
 Same as above for 100 mm ht skirting including
3.08 the wall chasing 300.00 Rm 199.00 59,700.00
and touch-up.

Ceramic tile flooring in CM1:3 - (Basic rate for

3.09 Ceramic Tile -
Rs 75/sft except gst) for Toilet floor

Providing and laying of antiskid ceramic tiles of

size 450 x 450 mm or 600 x 300 of approved
colour quality, series, pattern and make Johnson/
equivalent in floors with or without border as
shown in the drawings or as directed by the
Architect. Floor tiles to be laid using bed mortar
(C.M 1:4) of required thickness to maintain the
finished floor level ( FFL ) thick with
specified spacers. Cost should includes required
100.00 Sqm 1443.00 144,300.00
epoxy grouting for the joints, cut outs for
services, PVC edge beading for corner, wastage
of materials, lead lift of material covering after
laying by using polythene sheet with POP,
required scaffolding, stages, fixing porcelin
accessories on walls if required, acid wash
cleaning after laying of tiles etc. al complete
as per drawings, specifications and / or as
directed by the engineer.

Glazed Wall Tiles in CM1:3 - (Basic rate for

3.10 Glazed Tile - Rs
75/sft except gst) for Toilet, Pantry & Kitchen wall

Providing and laying of glazed tiles of size 200 x

300mm or 300 x
450 mm of approved colour quality, series,
pattern and make Johnson/ equivalent at all
floors with or without border as shown in the
drawings or as directed by the Architect. Wall
tiles to be laid using mortar (C.M 1:4) of
required thickness to maintain the finished
level Cost should includes required 375.00 Sqm 1493.00 559,875.00
Cementitious grouting for the joints, cut outs for
services, PVC edge beading for corner, wastage
of materials, lead lift of material, required
scaffolding, stages, fixing porcelin accessories
on walls if require acid wash cleaning after
laying of tiles etc. all complete as per
drawings, specifications and / or as directed by
the engineer.

3.11 Water proof plg. in Sunken portion

 Plastering with cement mortar 1:3 ( 1 cement : 3
sand ) with slope towards spout over
approved " ROFFE - Hyguard EX” or
"FOSROC" or " SIKA " brush bond
waterproofing compound application on the
concrete surface as per manufacturers
specifications including hacking the concrete 157.00 Sqm 697.00 109,429.00
surface brushing cleaning, scaffolding curing
etc., all complete as per drawings
specifications and / or as directed by the
engineer The cost to include the packing and
water proofing of the plumbing sleeve pipes
from toilet sunken to plumbing duct

3.12 Brick jelly concrete in Sunken portion for Toilets

Supplying and laying of brick surki concrete

1:3:6 (1 cement : 3 sand 6 part 25mm nominal
size brick aggregates) on the toilet sunken
portion laid to fall and finished including
32.00 Cum 4975.00 159,200.00
rounding of junction, including all floors
etc.,all complete as per drawings
specifications and / or as directed by the
engineer.

Total 3,588,199.00
IV MS / SS Railing works
4.00 Windows Grill/ Ms works

Window grills including painting with enamel

4.01 Paint all complete as per drawings, specifications 3000.00 Kg 124.00 372,000.00
and / or as directed by the engineer

Supplying & fixing MS ladder all complete as

per drawings
402 200.00 Kg 119.00 23,800.00
specifications and / or as directed by the
engineer

Supplying & fixing MS platform for HVAC outdoor

4.03 unit all complete as per drawings, specifications 300.00 Kg 124.00 37,200.00
and / or as directed by the engineer

4.04 STAIRCASE SS HANDRAIL (MAIN)

Supply and fixing of STAIRCASE TOP RAILING -

Specification TOP RAIL 50mm OD x 1.6 mm
thick SS Round fixed to wall GRADE All SS
will conform to AISI grade AISI30400, FINISH All
SS will be polished to a MATT Finish, including
matching stainless steel items such as bars ,
40 Rm 796.00 31,840.00
plates, screws etc., welding and forming units
with best workmanship set in position in to
existing masonry / concrete and making good
the same etc., all complete as per drawings,
specifications and / or as directed by the
engineer

Total 464,840.00
V PAINTING
 Providing & painting 2 coats of Plastic Emulsion
Asian, Delux Paint for internal wall of approved
brand and colour to give an even shade over
2 coats putty and 1 coat of water based
5.01 2800.00 Sqm 398.00 1,114,400.00
primer including Scaffolding, etc., complete -
Premium Emulsion Paint. al complete as per
drawings, specifications and / or as directed by
the engineer .

Staircase & Stilt floor ceiling painting

Providing & painting 2 coats of Plastic Emulsion

Paint for interna ceiling of approved brand and
colour to give an even shade over 2 coats putty
and 1 coat of water based primer including
5.02 1500.00 Sqm 398.00 597,000.00
Scaffolding etc., complete - Premium Emulsion
Paint. all complete as per drawings,
specifications and / or as directed by the
engineer

Texture Paint Preparing the surface (with

necessary tools) of external walls applying, as
directed by Engineer In-charge etc. complete
5.03 in all respects at all levels. Cost including QRO Sqm 500.00
necessary scaffolding. all complete as per
drawings, specifications and / or as directed by
the engineer

Preparing the surface (with necessary tools)

of external walls applying, one coat of
primer, two coats of Asian, Delux or
equivalent paint and colour as approved by
Architect, applied evenly to give uniform finish
5.04 1250.00 Sqm 398.00 497,500.00
with Brush, Preparing and clearing the surfaces
etc all complete as per drawings, specifications
and / or as directed by the engineer ., complete
in all respects at all levels Cost including
necessary scaffolding.

Preparing the surface (with necessary tools)

of external walls applying, one coat of
primer, two coats of Asian, Delux or
equivalent and colour as approved by Architect,
applied evenly to give uniform finish with Brush,
Preparing and clearing the surfaces etc
5.05 complete as per BIS standard codes, all QRO Sqm 500.00
complete as per drawings, specifications and /
or as directed by the engineer complete in
all respects at all levels. Cost including
necessary scaffolding. (Co efficient for
painting on texture is 1.3 ) IN TEXTURE
AREAS

Painting White Cement 2 coat for lift well

inner wall area at complete as per drawings,
5.06 175.00 Sqm 199.00 34,825.00
specifications and / or as directed by the
engineer

Total 2,243,725.00
 VI JOINERY - WINDOWS & DOORS
6.10 WINDOWS
Openable UPVC Windows

Providing and fixing of white profile

openable window using
'Kommerling'/equivalent uPVC profile
58x57mm box section for outerframe,
58x68mm ’C' section for shutters, with 1.2mm
thick G channel for reinforcement glazed with
6.1.1 113.00 Sqm 10945 1,236,785.00
Smm thick clear glass Electroplated Espag
hinges, Zinc alloy duly powder coated handle
with Smm thick clear glass, with necessary
hardwares etc. complete as per drawings,
specifications and / or as directed by architect /
engineer. Basic price 750/Sft

UPVC Top hung or ventilator for Basement & Toilet

Providing and fixing of white profile Top

hung window using 'Kommerling'/equivalent
uPVC profile box section for outerframe as per
shop drawing ’C' section for shutters, with
1.2mm thick G channel for reinforcement
glazed with Smm thick clear glass
6.1.2 39.00 Sqm 12935 504,465.00
Electroplated Espag hinges, Zinc alloy duly
powder coated handle with Smm thick clear
glass, with necessary hardwares etc.
complete as per drawings, specifications and /
or as directed by architect / engineer. Basic
price 750/Sft

Curtainwall Glazing - Elevation side & Staircase

side

Providing & fixing of aluminium curtainwall

glazing - all panels fixed using specially
designed powder coated aluminium
Jindal/equvalent 158 x 55 x 1.8mm section for
verticals, 72 x 55 x 2mm section for
horizontal, glazed with 8mm thick clear
6.1.3 210.00 Sqm 15920 3,343,200.00
Toughened Glass with presure plate & cover
cap (Dowsil 789) weather grade silicon sealant
and other necessary hardwares etc including all
materials and labour etc, all complete as per
drawings specifications and / or as directed by
the Architect / Engineer. Basic price 1000/Sft

6.1.4 Wood Doors

 Providing & Fixing of 5"x 2.5" teak wood door
frame with polish finish with door wood panel
shutter 30 mm thick finished with 4mm thick
veneer on both sides and shutter edge
finished with T/W lipping. fixed to plastered
masonry openings with "L" clamps or anchor
fasteners at every 600 mm and Including
supply & fixing charges for all hardware like
hinges,handle, lock, door closure complete as
per drawings, specifications and / or as directed
by architect / engineer.Teak wood basic price
Rs.4500 / Cft

Single shutter openable door as per the standard

6.1.5 33.00 Sqm 17700 584,100.00
/ as per drawing

Single shutter openable door as per the standard

6.1.6 / as per drawing with door to have vision panel of 75.00 Sqm 16915 1,268,625.00
8mm thick Plain Glass fixed with wooden beading

Total 6,937,175.00
VII MISCELLANEOUS
7.10 LOCKSET

Providing and fixing of required diameter steel

reinforcement bars for concrete nib or projection
slab with the Prior approval from the Architect.
Prior to start the work, proper methodology
has to be submitted by contractor to get
approval from Architect and Client The cost
shall include necessary diameter of drilling
upto the required depth in the concrete,
grouting material, staging, lead, lift and all
complete as per drawings, specifications
and / or as directed by the engineer .

Note : Unauthorized Anchoring is not acceptable

at any stage.
7.1.1 8mm 10.00 No 299.00 2,990.00
7.1.2 10mm 10.00 No 398.00 3,980.00
7.1.3 12mm 10.00 No 498.00 4,980.00
7.1.4 16mm 10.00 No 597.00 5,970.00
7.1.5 20mm 10.00 No 697.00 6,970.00
7.1.6 25mm QRO No 800.00
7.1.7 32mm QRO No 900.00
7.20 Supply of labour
7.2.1 Mason QRO No 800.00
7.2.2 Male coolie QRO No 600.00
7.2.3 Female coolie QRO No 500.00
7.2.4 Stone cutter QRO No 1000.00

Providing Barricade using metal pipes and

metal sheets to the required support from
7.2.5 100.00 Sqm 1194 119,400.00
ground level as directed by architect /
engineer and no extra claim will be allowed.
 Providing Barricade using metal pipes and green
dust control net to the required support from
7.2.6 25.00 Sqm 1990 49,750.00
ground level as directed by architect /
engineer and no extra claim will be allowed.

Breaking if RCC in all floors and disposal of the

7.2.7 5.00 Cum 1990.00 9,950.00
same from site
Breaking if PCC in foundation and disposal of the
7.2.8 5.00 Cum 1990.00 9,950.00
same from site
Breaking if Brick work in foundation/All floor
7.2.9 and disposal of the 5.00 Cum 124.00 620.00
same from site

Providing and fixing SS cleaning hook in the

parapet wall etc complete in open terrace as
7.2.10 25.00 No 1493.00 37,325.00
per specification and as directed by
architect / engineer

Total 251,885.00
SUB - TOTAL (A) 37,281,623.00
B External Yard / Site Developments works

Providing under ground sump with the required

capacity as per the consultant drawings. The
work contain, excavation, PCC, RCC Base slab,
walls, top slap, Shuttering, reinforcement,
masonary plastering, waterproofing, backfilling,
manhole covers, rungs for access on all
manhole etc., all as per the drawing and as
1 12000.00 Lit 28.00 336,000.00
instructed by the Engineer in-charge or
Architect/Consultants. Waterproofing for external
wall surface & plastering with water proof
chemical for inside surfaces with wall & floor Tile
basic price 40/sft. Fixing of puddle flange as per
the drg issued by the client **Refer Strcutura and
Architectural drawing for further details.

Providing Over Head Tank with the required

capacity as per the consultant drawings. The
work contain, RCC Base slab, walls, top slab,
Shuttering, reinforcement, external plastering,
waterproofing plastering inside tank & Wall,
floor Tile basic price 40/sft, manhole covers,
rungs for access on all manhole etc., all as per
the drawing and as instructed by the
Engineer in-charge or Architect/Consultants.
Fixing of puddle flange as per the drg issued by
the client **Refer Structural and Architectural
drawing for further
details.

2 Water tank 10000 Liter 10000.00 Lit 30.00 300,000.00

Earth filling in yard with earth brought from
3 175.00 Cum 697.00 121,975.00
outside
4 M Sand Filling in Yard 32.30 Cum 1741.00 56,234.30
5 P.C.C 1:4:8 in Flooring 32.30 Cum 6468.00 208,916.40
 Providing and fixing M30 grade 80mm thick
inter locking pavers
blocks of Aeon's/equivalent make over 100mm
sand bed. Before fixing of pavers block the
formed ground should be fully compacted using
earth rammers & spread the river sand of
6 323.00 Sqm 697.00 225,131.00
compacted thickness 100mm Cost to be
included of lead, watering and consolidating
etc., complete all as per Architectural drawing &
as directed by the Engineer in-charge or
Architect/ Consultants. Basic
grice Rs.100/ Sft

Providing and fixing PCC 1:2:4 precast blocks for

kerbs of size 150 x 300 mm each piece not less
than 450 mm long and providing necessary
inserts in the precast block at the time of casting
itself with 3" dia PVC pipe spout at every
7 25.00 Rm 697.00 17,425.00
10.00M interval including excavation, fixing
and pointing the joints with C.M. 1:3 to the
required line and level complete as per
drawings, specifications and / or as directed by
architect / engineer

MS gates - Openable / Sliding

Supplying and fixing of two leaf openable /

Sliding gate made out of 30mm x 70mm hollow
MS section frame work with 10mm and thick
40mm wide MS flat for vertical and horizontally.
The lower side of gate to be both sides covered
with 3mm thick MS sheet. The leaf gate should
8 600.00 Kg 124.00 74,400.00
provided with the MS wheel track with the rails
fixed on the road surface. Cost including
necessary supports, guide rail, al
accessories,transpotation, etc., All complete as
directed by the Engineer in charge or Architect/
Consultants

Compound wall

(8" dia auger for 8'0“ depth, or footing as per the

drg issued, 9"x10’ plinth beam, 9"x 9" RCC
9 77.00 Rm 2980.00 229,460.00
column @ every 10' interval & 4.5" Brick work
for 5'6"ht in/c plastering of both sides )

SUB - TOTAL (B) 1,569,541.70

TOTAL AMOUNT (A+B) 38,851,164.70
GST @ 18% 6,993,209.65
GRAND TOTAL 45,844,375.00