ENGINEERING&TECHNOLOGY (MRCET) ELECTRICAL MACHINES-II LAB
MALLA REDDY COLLEGE OF
7. SCOTT CONNECTION OF SINGLE-PHASE TRANSFORMER
into
AIM:To perform the scott connection of 1-phase transformer and converting 3-phase supply
2-phase supply voltage.
NAME PLATE DETAILS:
[Link] Specification Range
230/1 15V
Voltage
2 Current 13A
Cycles 50Hz.
3
Output 3KVA
4
5 Phase 1-phase
APPARATUS REQUIRED:
Name of the apparatus Range Type Quantity
[Link].
2KVA 2
1 Transformer
Teaser transformer 2KVA 100%,86.6%,50%
2
0% Tappings
2
3. Voltmeter (0-600)V Digital
Digital 2
4. Voltmeter (0-300)V
Digital 2
5. Ammeter (0-10)A
3
6. Ammeter (0-5)A Digital
required
7. Connecting wires
THEORY:
Conversion from three phase supply to two phase supply
is achieved through Scott (or)
commonly
connections of two phase transformers. This 30 phase to two phase conversion is
tree
intended to run two single phase furnaces together
used in electric furnace installations where it
a balanced load from a three phase supply [Link] specially tapped transformers
and draw centre-tapped
this [Link] is called the main transformer which has a
are required for
transformer and has a primary voltage rating of
the main
[Link] other is called the teaser
[Link] secondary of both transformers have
equal voltage ratings.
transformer
Page 38
DEPARTMENT OF EEE
MALLA REDDY COLLEGE OF ENGINEERING&TECHNOLOGY(MRCET) ELECTRICAL MACHINES-II LAB
CIRCUIT DIAGRAM:
415/(0-470VM
3QAuto Transformer Teaser Transformer
(05A)MI 096
Re
FUSE
(0-300V)MI
415V,
:8696
30AC Süpp MCB
Y*
FUSE 10096
Voo%. MI
B
FUSE -**.***.
Main Transformer
N
(0-300V)MI
PROCEDURE:
1. Connections are made as per the circuit diagram
2. Ensure that output voltage of the variac is set in zero position before starting the experiment.
3. Switch ON the supply.
4. The output voltage of the variac is gradually increased in steps upto rated voltage of single phase MAIN
transformer and readings are correspondingly taken in steps.
5. Enter the readings in tabular column.
6. After observations, the variac is brought to zero position and switch OFF the supply.
DEPARTMENT OF EEE Page 39
ELECTRICAL MACHINES-II LAB
MALLA REDDY COLLEGE OF ENGINEERING&TECHNOLOGY (MRCET)_
CALCULATIONS:
Prove
2 2
V2TM=
TABULAR COLUMN:
Theoretical
Voltmeter Ammeter Voltmeter Voltmeter Voltmeter calculation
S
reading reading reading reading reading
VM = (v'T
V:T VzM VTM
V')
RESULT:
VIVA-VOCE QUESTIONS:
IWhat is Scott connection of transformer?
2 What is the application of Scott connection?
3 How do you parallel two single phase transformers?
4 What will happen if two transformers are connected in parallel with unequal impedances?
5 How do you parallel a transformer?
6 Why potential transformers are connected in parallel?
DEPARTMENT OF EEE Page 40
