Scribd
Upload
882 views1 page

VW BMM Torsion Adjustment Guide

Uploaded by

smart tv
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
882 views1 page

VW BMM Torsion Adjustment Guide

Uploaded by

smart tv
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

VW Touran 2.

0 TDI PD (BMM) - Torsion Value Adjustment Guide


This guide explains how to check and adjust the torsion value (camshaft-to-crankshaft phase angle)
on a VW Touran 2.0 TDI PD BMM engine using VCDS. The factory reference value for your engine is -0.5° KW.

1. Reading the torsion value


- Warm up engine to ~90°C.
- Connect VCDS → [01 - Engine] → [Measuring Blocks].
- Go to Group 004, Field 4 shows torsion value (°KW).
- Example: -0.5° KW (factory setting).

2. Adjusting the torsion value


- Remove upper timing belt cover.
- Loosen 3x camshaft sprocket bolts (18mm), just enough to rotate sprocket.
- Clockwise rotation → increases torsion value (more positive).
- Counterclockwise rotation → decreases torsion value (more negative).
- Torque bolts: 20 Nm + 90° turn.
- Recheck torsion value in VCDS until it matches -0.5° KW.

3. Visual reference
Below is a diagram showing camshaft sprocket rotation vs. torsion value change.

Camshaft Sprocket

- Value (Retard) + Value (Advance)

You might also like