Scribd
Upload
16 views6 pages

MSDS PVC Welding

This document provides information on the components, risks, first aid, fire-fighting measures, handling, storage, and disposal of PVC welding. PVC welding contains methyl ethyl ketone, tetrahydrofuran, toluene, and cyclohexanone. Contact with skin and eyes should be avoided, and personal protective equipment should be used. In case of fire, extinguishing agents such as carbon dioxide and chemical powder should be used.

Uploaded by

ScribdTranslations
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
16 views6 pages

MSDS PVC Welding

This document provides information on the components, risks, first aid, fire-fighting measures, handling, storage, and disposal of PVC welding. PVC welding contains methyl ethyl ketone, tetrahydrofuran, toluene, and cyclohexanone. Contact with skin and eyes should be avoided, and personal protective equipment should be used. In case of fire, extinguishing agents such as carbon dioxide and chemical powder should be used.

Uploaded by

ScribdTranslations
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

MSDS

SAFETY DATA SHEET Edition: 2


PVC WELDING Page: 1 - 6

Identification of the substance/preparation and the company responsible for its


manufacturing/marketing

PVC Welding

Solvent cement for PVC sheets

ENAR S.A.S STREET 17 No 96ª -50 FONTIBON

Phone: 2672014

4040141-4046506

2. Composition/information on components

No. SUBSTANCE CAS NUMBER UN NUMBER


1 Methyl ethyl ketone 78-93-3 1193

2 Tetrahydrofuran 109-99-9 2056

3 Toluene 108-88-3 1294

4 Cyclohexanone 108-94-1 1915

3. Identification of risks/hazards
Conditions that must be avoided: Avoid open flames, do not produce sparks, and do not smoke.
Materials to avoid: oxidizers and nitric acid (fire and explosion hazard).
MSDS

SAFETY DATA SHEET Edition: 2


PVC WELDING Page : 2 - 6

4. First aid
Inhalation: move the victim to an isolated and well-ventilated area, supply oxygen or
artificial respiration if necessary to keep warm seek medical help from
immediate.
Skin contact: wash the affected or contaminated area immediately for at least
15 minutes with plenty of water remove contaminated clothing.
Eye contact: rinse with plenty of water for at least 15 minutes if wearing contact lenses
remove contacts immediately seek medical help.
Ingestion: seek medical help immediately DO NOT induce vomiting provide water in
in case the person is conscious.

5. Firefighting measures

Suitable extinguishing media: Water may be ineffective. In case of fire, use


carbon dioxide, dry chemical powder or appropriate foam.

Inadequate extinguishing media: Direct water.


Special hazards in case of fire: The vapors are heavier than air and
they can travel to an ignition source and return stronger. The vapors can
spread across the ground and accumulate in low or confined areas.
Products formed in combustion: This product forms peroxides of stability
unknown.
Protection for extinguishing personnel: Use self-contained breathing apparatus.
pressure demand (approved) and full protective equipment.

6. Measures to take in case of accidental spill


Personal precautions: Use personal protective equipment, gas mask and
vapor
Environmental precautions: avoid letting the product reach water sources or
drains prevent runoff and ditches.
Cleaning methods and procedures: Absorb the spill with inert material (by
example vermiculite, sand or soil), and place it in an appropriate container. Use water
powdered to dilute the spill of a non-flammable mixture, avoid tools that
generate sparks.
MSDS

SAFETY DATA SHEET Edition: 2


PVC WELDING Page: 3 - 6

7. Handling and storage


Manipulation: Wash completely after handling. Remove contaminated clothing.
and label it before using it again. Ground it and link the containers when transferring.
the material.
The empty containers contain residues of the product, (liquid and/or vapor), and may be
dangerous. Take precautions against static discharges. Keep the
well-sealed container. Do not pressurize, cut, weld, pierce, shred, or expose the
empty containers to heat, sparks or open flames. Use only with ventilation
suitable. Avoid breathing the vapor or mist. Do not get in eyes. Avoid contact with skin
and the clothes.

Storage: Keep away from heat, sparks, and flames. Store in a place
fresh in the original packaging and protected from sunlight. Do not store with materials
oxidizers or flammable. Keep protected from moisture.

8. Exposure control/personal protection


Require the use of gloves, boots, aprons, and waterproof protective clothing to prevent
prolonged or repetitive skin contact, use materials such as rubber or material
chemical resistant, mask for organic vapors and protective goggles to
splash test. Clothing soaked with PVC solvent cement should be placed
in sealed containers until it can be disposed of, if it is going to be washed or is going to
Using another cleaning method will be reported to the person in charge of the properties.
dangerous of the same.

Other protections: eyewash systems and showers at the workplace.

9. Physical and chemical properties

Physical state Clear liquid


Boiling point 66° C
Vapor pressure 140mm Hg
Viscosity 90 cps
Material Safety Data Sheet

SAFETY DATA SHEET Edition: 2


PVC WELDING Page: 4 - 6

10. Stability and reactivity


Stability: The product is stable under normal conditions of use and storage.
The heat, the sparks, and the flame contribute to instability.
Reactivity: Can form explosive peroxide compounds, flammable liquid, can
release vapors that form flammable mixtures at the ignition temperature or higher.

Materials to avoid: Caustics, strong oxidizing agents, and acids.

11. Toxicological information

12. Ecological information


Prevent all discharge of the product into sewers or watercourses ecological data
specific to this product. Please refer to section 6 for information
regarding spill response.
13. Considerations regarding its elimination.

Having an identified kit to collect spills or contaminated material,


red combustible material cans in an area of maximum ventilation away from sunlight or heat.
The contaminated solid material must be incinerated by trained personnel, using equipment
with an adequate smoke purification system, or be deposited in a landfill
safety sanitary, ensuring that the waste of the material is carried out according to
to local regulations.
MSDS

SAFETY DATA SHEET Edition: 2


PVC WELDING 5-6

14. Information related to transportation

No. SUBSTANCE CASE NUMBER UN NUMBER


1-Methyl ethyl ketone 78-93-3 1193

2 Tetrahydrofuran 109-99-9 2056

3 Toluene 108-88-3 1294

4 Cyclohexanone 108-94-1 1915

15. Regulatory information


1. Law 769/2002. National Land Transit Code. Article 32: The load of a
The vehicle must be properly packed, labeled, wrapped, and covered in accordance with the
national technical regulations.
2. Ministry of Transport. Decree 1609 of July 31, 2002. By which it
regulates the handling and ground transportation of hazardous materials by motor vehicles
road.
3. Ministry of Environment, Decree 4741 of 2005, Through which the Plan is regulated
Integrated Management of hazardous waste and transportation of hazardous waste.
MSDS

SAFETY DATA SHEET Edition: 2


PVC WELDING Page: 6 - 6

16. Other information


This safety sheet is intended only to provide guidance based on the NTC standard.
4435. For handling the material with the appropriate caution. The people who receive
the information should exercise its own judgment to determine the suitability of use
this product for a specific purpose. ENAR SAS is not responsible for any damage
caused to properties or persons by the inappropriate use of our products, already
that we do not know the manipulation or the precautions that each client has in the
storage.

You might also like