ORIGINAL
LISHI TOOLS
HU162
ORIGINAL
LISHI TOOLS
• Lock Profile: HU162 VAG 2015+
• Tool Type: 2-in-1 Pick & Decoder
• Compatibility: DOOR
• Finish: Anti-Glare
• IC Card: 1421
• Cuts: 10
• SIde Cuts: 4
• Security Key ( One Sided Entry )
SUITS
VOLKSWAGEN
• PASSAT 2015- Art ID: LP-HU162-SC4-D-AG
• TOUAREG 2018-
AUDI
• A4 2015-
• A7 2015-
• Q3 2015-
• Q5 2015-
• Q7 2015-
• TT 2015-
Art ID: LP-HU162-SC4-D-AG
OEM Door Lock & Key
Axis A. Axis B.
Axis C.
Chamfer for Axis identification
ORIGINAL
LISHI TOOLS
PICKING DIRECTION - Axis A
5. up 6. down 7. down 8. up 9. up 10. down
PICKING SIDE CUTS - Axis B & C
1. 2. 3. 4.
green lever green lever pink lever pink lever
(right side) (right side) (left side) (left side)
Art ID: LP-HU162-SC4-D-AG
Picking & Decoding
DECODING DIRECTION - Axis A
5. 6. 7. 8. 9. 10.
TOP
5. 6. 7. 8. 9. 10.
BOTTOM
• When decoding this lock it is vital to decode both Top & Bottom in each cut
position.
• The reading of the cut depth Top & the cut depth Bottom will always add up to 6.
• Example when reading a 1 depth at the Top , The bottom should read as a 5 at the
bottom to equal 6.
• Using the table above fill in both positions Top & Bottom in each cut position.
The positions in Red are the cuts that need to be entered into your key machine.
ORIGINAL
LISHI TOOLS
DECODED EXAMPLE AXIS A
5. 6. 7. 8. 9. 10.
TOP
1 3 3 5 4 2
5. 6. 7. 8. 9. 10.
BOTTOM
5 3 3 1 2 4
The Partial Key Bitting on Axis A is 1 3 3 1 2 4
Need to now decode Axis B & C to complete the Bitting
Calculations.
Art ID: LP-HU162-SC4-D-AG
Picking & Decoding
Axis B & Axis C Are calculated by retrieving the Angles of each cut
position before & after they are picked.
Before Picked After Picked Bitting
1.
2.
3.
4.
MASTER TABLE
Before Picked After Picked Bitting Calculation
60 30 2
60 60 4
90 30 1
90 60 3
ORIGINAL
LISHI TOOLS
DECODED EXAMPLE
Before Picked After Picked Bitting
1.
90 60 3
2. 60 60 4
3. 90 60 3
90 30 1
4.
Bitting is Calculated using the Master Table below.
Example: Position 1 Read as 90 before picked & 60 when picked.
Using the table below 90 & 60 = 3
The Calculated Bitting is: 3 - 4 - 3-1
MASTER TABLE
Before Picked After Picked Bitting Calculation
60 30 2
60 60 4
90 30 1
90 60 3
Art ID: LP-HU162-SC4-D-AG
Picking & Decoding
The Bitting must now be entered into another table to calculate Axis
B & C completely for Key Cutting.
1. 2. 3. 4.
Axis B
Axis C
The calculated Bitting must be entered into the red cells of the table.
1. 2. 3. 4.
Axis B 3 1
Axis C 3 4
To Calculate the missing cuts in the White cells Each cut position
must Add up to 5.
1. 2. 3. 4.
Axis B 2 1 3 1
Axis C 3 4 3 4
ORIGINAL
LISHI TOOLS
DECODED EXAMPLE AXIS A
5. 6. 7. 8. 9. 10.
TOP
1 3 3 5 4 2
5. 6. 7. 8. 9. 10.
BOTTOM
5 3 3 1 2 4
1. 2. 3. 4.
Axis B 2 1 3 1
Axis C 3 4 3 4
Art ID: LP-HU162-SC4-D-AG
Picking & Decoding
Fill in the final Table with known bitting from previous tables.
1 2 3 4 5 6 7 8 9 10
Axis A 1 3 3 1 2 4
Axis B 2 1 3 1
Axis C 3 4 3 4
1 2 3 4 5 6 7 8 9 10
Axis A 4 5 3 5 1 3 3 1 2 4
Axis B 2 1 3 1 1 1 1 1 1 1
Axis C 3 4 3 4 2 2 2 2 2 2
On Axis A - To Calculate the the 1st 4 Bittings in the White cells Each cut position must
Add up to 6.
Calculate using the Bitting from Axis B . and add the difference to Axis A in each cut
position.
On Axis B - Fill the rest of the bittings with 111111
On Axis C - Fill the rest of the Bittings with 222222
ORIGINAL
LISHI TOOLS
1 2 3 4 5 6 7 8 9 10
Axis A 4 5 3 5 1 3 3 1 2 4
Axis B 2 1 3 1 1 1 1 1 1 1
Axis C 3 4 3 4 2 2 2 2 2 2
Art ID: LP-HU162-SC4-D-AG
Decoding & Cutting
