Prepared by IT Department.
UNIT OF COMPETENCE
Record Client
Support
Requirements
LEVEL-1
INFORMATION
SHEET
Mary Help College
Department of Information
Technology
2
Learning Outcomes
At the end of the module the learners will be able
to:
LO1: Log requests for support
Record Client support requests and requirements
according to organizational standards.
Review client support history and details
Check and request the information for accuracy and
urgency according to organizational standards
LO2: Prioritize support requests
with appropriate personnel
Identify guidelines for prioritising or rating client
requests
Prioritise client request based on its criticality or effect
3
LO1: Client support requests and
requirements
Definition of Terms
 Client:- A Client is an individual, an organization, business or an
institution that may come in person or communicate using any
communication means like telephone, e-mail, fax or online help desk
to get technical support and consultation on technologies etc
 Log – means recording client support requirements based on
organizational rule, regulation and policies.
 Escalate - transferring a helpdesk that cannot be resolved to
personnel at a lower level such as an IT specialist or IT manager.
 First level Support - usually refers to the initial support offered to
a customer by a help desk operator; in this initial point of contact,
the officer determines the nature of the call and will try to solve the
problem if it is straightforward; support organizations usually have
quite clear outlines of what constitutes first level support.
 Priority - the value given to an incident, problem or change to
indicate its relative importance in order to appropriately allocate
resources and specify an appropriate time-frame for resolution.
4
Service Level Agreement (SLA)- is a legal
agreement / contract between a service provider
and a client detailing the level of service that is
provided, usually including what is covered, what is
not covered, the response time for resolution. It
describes the responsibilities and liabilities of all
parties involved.
Some of the contents of an SLA usually include the following:
 Response-time guarantees (often based on the type
of call and the SLA)
 Equipment and/or software that will be supported
 Where service will be provided
 Preventive maintenance
 Diagnostics
 Part availability (equivalent parts)
 Cost and penalties
 Time of service availability
LO1: Client support requests and
requirements
Call centers sometimes have different names for
level-one technicians. These technicians may be
known as level-one analysts, dispatchers,
or incident screeners. Regardless of the title,
the level-one technician’s responsibilities are
fairly similar from one call center to the next.
The primary responsibility of a level-one
technician is to gather applicable information
from the customer.
5
Level-One Technician Responsibilities
LO1: Client support requests and
requirements
Here is some of the information a level-
one technician must obtain:
 Contact information
 Description of the problem
 Priority of the problem
 The computer’s manufacturer and model
 The computer’s operating system
 Whether the computer uses AC or DC power
 Whether the computer is on a network and, if so,
whether it is a wired or wireless connection
 If a specific application was being used when the
problem occurred
 If any new drivers or updates have been installed
recently and, if so, what they are
 Some problems are very simple to resolve, and a level-
one technician usually can take care of these without
6
Level-One Technician Responsibilities
LO1: Client support requests and
requirements
7
Level-One Technician Responsibilities
LO1: Client support requests and
requirements
The level-two technician is usually more
knowledgeable than the level-one technician
about technology, or has been working for
the company for a longer period of time.
When a problem cannot be resolved within
ten minutes, the level-one technician
prepares an escalated work order.
The level-two technician receives the
escalated work order with the description of
the problem.
That person then calls the customer back to
ask additional questions and resolve the
8
Level-Two Technician Responsibilities
LO1: Client support requests and
requirements
The following list of guidelines details when to
escalate a problem to a more experienced
technician. These are generic guidelines; you
should follow your company’s business policy
for problem escalation.
■ Escalate problems that require opening the
computer case.
■ Escalate problems that require installing
applications, operating systems, or drivers.
■ Escalate problems that will take a long time
to walk a customer through, such as
Configuration Memory Operating System
9
Level-Two Technician Responsibilities
LO1: Client support requests and
requirements
10
What is a client support?
Client support is a service that computer and software
manufacturers, and other third-party service companies, offer to
clients.
Providing good IT supports for clients is vital to the effective
operation of any organisations, so you may find there are established
procedures for determining and addressing client support issues.
For personal computer products, the following are common client-
support options:
 mail-in service: The manufacturer will repair your equipment if
you mail it in. Typical turnaround time is about four days. In some
service plans, the manufacturer charges you for shipping
expenses.
 carry-in service: The manufacturer will repair your equipment,
but you must deliver it to a local service site. This is sometimes
called depot service.
LO1: Client support requests and
requirements
11
Client-support options…
On-site contract: For a monthly or annual fee, a repair person will
come to your site to fix problems. (The fee is included in the purchase
price of some machines.) Most on-site contracts guarantee that the
service will be rendered within a fixed number of hours from when you
report a problem.
Hot lines: Many software manufacturers provide a phone number that
you can call for advice and trouble-shooting. Often the number is toll-
free. The quality of this type of support varies considerably from one
company to another. Some hot lines are so good that they enable you to
solve most problems yourself. Others are so bad that you are unable
even to get through.
bulletin board system : Some companies maintain electronic
bulletin boards (or forums within online services) staffed by service
engineers. If you have a modem, you can report a problem to the bulletin
board and a technician will respond. This can be convenient because
bulletin boards are usually open 24 hours a day. Also, bulletin boards
enable you to download software updates that correct known bugs.
LO1: Client support requests and
requirements
Describe Good Communication Skills and
Professional Behavior
Whether you are talking with a customer on the
phone or in person, it is important to communicate
well and to represent yourself professionally. Your
professionalism and good communication skills
will enhance your creditability with the customer.
A customer can “see” your body language. A
customer can hear your sighs and sense that you
are sneering, even over the phone. Conversely,
customers can also sense that you are smiling
when you speak with them on the phone. Many call-
center technicians have a mirror at their desk to
monitor their facial expressions.
Successful technicians control their reactions and
12
LO1: Client support requests and
requirements
Determine the Customer’s Computer
Problem
Remember these three rules at the beginning of
your conversation:
■ Know: Call your customer by name.
■Relate: Use brief communication to create a
one-to-one connection between you and your
customer.
■ Understand: Determine the customer’s level
13
LO1: Client support requests and
requirements
To accomplish these tasks, you should
practice active listening skills. Allow the
customer to tell the whole story. As the
customer is explaining the problem,
occasionally interject a small word or phrase,
such as “I understand,” “Yes,” “I see,”
or “Okay.”
This behavior lets the customer know that
you are there and listening. This is not the
same as interrupting the customer to ask a
question or make a statement.
A technician should not interrupt the
14
Determine the Customer’s Computer
Problem(cont…)
LO1: Client support requests and
requirements
Many times in a conversation, you might
find yourself thinking about what to say
before the other person finishes talking.
When you do this, you are not really
listening. As practice, try listening carefully
when other people speak, and let them finish
their thoughts.
After you have listened to the customer
explain the whole problem, clarify what the
person has said. This helps encourage the
customer that you have heard and
understand the situation.
A good practice for clarification is to
15
Determine the Customer’s Computer
Problem(cont…)
LO1: Client support requests and
requirements
When dealing with customers, you must be
professional in all characteristics of your role.
You must handle customers with respect and
prompt attention. When on the phone,
make sure that you know how to put a
customer on hold, as well as how to
transfer a customer without losing the
call. How you conduct the call is
important. Your job is to help the
customer focus on and communicate the
problem so that you can solve it.
Be positive when communicating with the
customer. Tell him what you can do. Do not
16
Display Professional Behavior with the Customer
LO1: Client support requests and
requirements
Customers will quickly sense whether you
are interested in helping them.
Here are some recommendations to follow
before you put a customer on hold.
First, let the customer finish speaking.
Then, explain that you have to put him
on hold, and ask him for permission to
do so.
When the customer agrees to be put on
hold, thank him.
Tell him that you will be away only a few
minutes, and explain what you will be
17
Display Professional Behavior with the Customer(cont…)
LO1: Client support requests and
requirements
18
ustomer Communication Dos and Don’ts
Display Professional Behavior with the Customer
LO1: Client support requests and
requirements
19
Observe the following list of things you
should avoid when communicating with a
customer:
■ Minimizing customer problems.
■ Using jargon, abbreviations, and acronyms.
■ Displaying a negative attitude or using a
negative tone of voice.
■ Arguing with customers or becoming
defensive.
■ Being judgmental or insulting or calling the
customer names.
■ Distractions and interruptions when talking
with customers.
■ Unnecessary and unexpected holds.
Display Professional Behavior with the Customer
LO1: Client support requests and
requirements
20
 Part of your job is to focus the customer during
the phone call. Keeping the customer focused on
the problem allows you to control the call. This
makes the best use of your time and the
customer’s time on troubleshooting the problem.
Do not take any comments personally,
and do not retaliate with comments or
criticism. If you stay calm, finding a solution to
the problem remains the focal point of the call.
Focus the Customer on the Problem During the Call
LO1: Client support requests and
requirements
21
Just as there are many different computer
problems, there are many different types of
customers.
1. Talkative Customer
2. Rude Customer
3. Angry Customer
4. Knowledgeable Customer
5. Inexperienced Customer
Focus the Customer on the Problem
During the Call
LO1: Client support requests and
requirements
22
Talkative Customer
A talkative customer discusses everything
except the problem. This kind of customer
often uses the call as an opportunity to socialize. It
can be difficult to get a talkative customer to focus
on the problem.
LO1: Client support requests and
requirements
Focus the Customer on the Problem
During the Call
23
Rude Customer
A rude customer complains during the call and
often makes negative comments about the
product, the service, and the technician. This type of
customer is sometimes abusive and uncooperative
and is easily aggravated.
LO1: Client support requests and
requirements
Focus the Customer on the Problem
During the Call
24
Angry Customer
An angry customer talks loudly during the call
and often tries to speak when the technician is
talking. Angry customers are usually frustrated that
they have a problem and upset that they have to call
somebody to fix it.
LO1: Client support requests and
requirements
Focus the Customer on the Problem
During the Call
25
Knowledgeable Customer
A knowledgeable customer wants to speak
with a technician who is equally experienced in
computers. This type of customer usually tries to
control the call and does not want to speak with a
level-one technician.
LO1: Client support requests and
requirements
Focus the Customer on the Problem
During the Call
26
Inexperienced Customer
An inexperienced customer has difficulty
describing the problem. These customers
usually can’t follow directions or communicate the
errors they encounter.
LO1: Client support requests and
requirements
Focus the Customer on the Problem
During the Call
27
LO1: Client support requests and
requirements
Client Support Roles
The most important skills needed by the IT
professional who is working as a help desk
person to record the clients’ support
requirement are:
Courteous and Professional manner
Active listening skill
Following call handling processes
Following organizational rules and
regulations
Good Communication Skill
Technical skill
28
LO1: Client support requests and
requirements
i) Courteous and Professional manner
When dealing with clients, it is important
for you to ensure you establish and
maintain a courteous and professional
manner.
To be courteous means to show good
manners and respect for the clients’
opinions and needs.
To be professional means to conduct
yourself in a manner that is mature,
responsible and fair.
When dealing with clients in a workplace
29
LO1: Client support requests and
requirements
ii) Active Listening Skill
 When you are dealing with client , it is critical
that you listen carefully to the facts and
respond appropriately. To do this, people often
use a technique called active listening.
Active listening occurs when you focus on the
message you’re receiving from the other
person, without thinking about what you want
to say next.
Your response to the client is one that
paraphrases what you’ve heard. That is, you
summarise what you’ve heard, and say it back
to the sender in your words. This ensures that
you have understood the idea the client wants
30
LO1: Client support requests and
requirements
iii) Call handling processes
General Guidelines Handling a Telephone Call
All telephone calls shall be answered on time
and in a professional and courteous
manner
Telephones should be answered within three (3)
rings and it becomes each employee’s job to
answer it.
Most organisations require their staff to answer
the telephone with a greeting, identifying the
organisation, the department/section, their name
and offering help with an opening statement. For
example:
31
LO1: Client support requests and
requirements
Guidelines…
Stop talking and focus your attention on the caller
or avoid distractions and Concentrate on what the
client is saying.
Show interest and concern to the reason for the
call.
Find out what the caller needs and don't be afraid
to ask the caller questions to find out his or her
concerns.
If you have determined you are not the person
they should talk to, apologize to the caller and
briefly explain why you are unable to assist him
or her. Give the caller the correct telephone
number and the person's name which can assist
him or her.
32
LO1: Client support requests and
requirements
iv) Following organizational rules and
regulations
Every client interaction should be guided by the
policies and guidelines of the organisation.
These policies and guidelines are often
documented, but can also be established ways of
behaving that form part of the culture of the
organisation.
Why you need Organizational Rules and
regulations
To have professional conduct
To standardise the interactions between IT
Technician and clients.
To ensure the process of supporting clients runs
smoothly.
33
LO1: Client support requests and
requirements
v) Good Communication Skill
Whether you are talking with a client on
the phone or in person, it is important to
communicate well and to represent
yourself professionally.
 Good communication skills will enhance
your creditability with the client.
Successful technicians control their
reactions and emotions from one client
call to the next.
A good rule for all technicians to follow
is that a new customer call means a
LO1: Client support requests and
requirements
You can develop more effective communication
skills by practicing the following techniques:
1. MAINTAINING EYE CONTACT: Look into the
other person’s eyes while speaking or
listening... It shows that your are interested
and paying attention.
2. LISTENING: To avoid misunderstandings, give
the other person a chance to put their point
across without interruptions.
3. LEADING: Make comments and ask questions
that encourage the other person to continue
communicating in the direction you want.
vi) Technical skill
34
35
LO1: Client support requests and
requirements
Help Desk and Support
A help desk is simply a person who handle
phone call of client’s problems and a more or
less has organized idea of how to solve the
problems that come in.
A Help Desk is the one in charge of
recording/logging client support request and
enter them into a centralized database
program that is designed to track client
support requirements.
A Help Desk is someone who help the customer
to fix there problems or who gives support.
Clients may request support :
By calling a telephone or by email
They may come in person /coming to office/
36
LO1: Client support requests and
requirements
Support is typically provided for the
following IT Problems area:
 Hardware and software faults
 Networking problems (including login problems)
 Email and Internet problems
 Consultation on purchasing information technologies
 Installation and configuration hardware
 Training needs
 Printing problems
 Software installation and upgrade etc
In many organisations, help desk operators
attempt to fix straightforward problems.
This is known as first level support.
37
LO1: Client support requests and
requirements
In some organizations, operators simply
log calls, which are then allocated to the
appropriate technical staff.
The proportion of problems that can be
handled at the first point of contact will
depend on the skill and training of the
help desk staff.
Recording Client’s support Request
If you are on the help desk and a client
rings, fax, e-mail or come in person and
request for support, what details do you
ask them to provide?
38
LO1: Client support requests and
requirements
Data required Entry
Log number:
Help Desk Operator’s name:
Date and time of client request:
Client’s name:
Client’s contact details:
Section and location:
Problem logged:
Date and time problem occurred:
Computer/peripheral affected
Impact of the problem on
operations/business:
First line support provided (if any):
Escalate to support staff? Yes/No
Support staff request details: Date and
time reported:
Name of support staff:
Sample of a typical data entry form
39
LO1: Client support requests and
requirements
Example: Recording/logging a client request
First Request:
Details:
The 1st
client who’s name is Terefe from the
Ministry of Education, Arat Kilo with a contact
number 0912345678 call you today at 12 o’clock
and asking help for network server failure he
encounter the problem yesterday at 4 o’clock so
he cannot connect to the website.
Second Request:
Details:
The 2nd
client who’s name is Mispin from the ECBP,
Bole Road with a contact number 0913756347
send you an email today at 11 o’clock requesting
for support of upgrading his Microsoft Office 2003
40
LO1: Client support requests and
requirements
.
Data required Entry
Log number: 001
Help Desk Operator’s
name: Ato Dereje Alemu
Date and time of client
request: 05-12-2012, at 12 o’clock
Client’s name: Terefe
Client’s contact details: Addis Ababa, contact number
0912345678
Section and location: Ministry of Education, Arat Killo
Problem logged: Network server failure
Date and time problem
occurred: 04-12-2012 at 4 o’clock
Computer/peripheral
affected Server Computer
Impact of the problem on
operations/business: Cannot connect to the website
First line support
provided (if any): Not provided
Escalate to support staff?
Yes/No Yes
Support staff request
details: Date and time
reported:
07-12-2012, at 12 o’clock
Name of support staff: IT Specialist
41
LO1: Client support requests and
requirements
Reviewing Client Support History
Reviewing client support history means
checking the client support request database
for the same problems.
This is very important to overcome the
following main challenges one may face while
working as a Help Desk IT professional.
 It enables to find easily how the previously logged
problem is solved
 It eliminates redundancy of recording the same
problem
 It enables easily identify the problems solved
from the one in queue
 It enables the responsible IT staff for the
Self Check
1. What is a good rule for a call center
technician to follow?
A. Be proactive by avoiding speaking with
upset or angry customers.
B. Consider each new customer call a fresh
start.
C. Go with your first impression of the
customer, and use Netiquette.
D. Focus on how to repair the problem while
the customer is speaking.
42
B. Consider each new customer call a
fresh start.
Self Check
2. What is an SLA?
A. An itemized record detailing all levels of
service performed on equipment covered
by a manufacturer warranty
B. A legal agreement between a customer
and a service technician confirming specific
services performed on equipment not
covered by any warranty
C. A legal agreement between a customer
and the service vendor confirming a
specific level of support
D. A legal record of customer invoices
43
C. A legal agreement between a customer
and the service v
44
LO2:Prioritizing client support
requests
Identifying relevant guidelines for
prioritizing or rating client requests
There should be some mechanism used to
prioritize service request that come from
clients.
In many organizations there are rules and
policies that govern prioritization issues.
The most important factor taken into
consideration is:-
 Business Critical System – the interruption of
such system directly affects the production, profit
of the organization or the business. It results in
bankruptcy, frustration, disappointment etc
 Urgency of the service requested
45
LO2:Prioritizing client support
requests
Prioritize client requests based on
criticality or impact on the business
Some client support requests will be allocated
a high priority, as they involve critical IT
functions which cannot be carried out until the
problem is resolved. Extra resources may have
to be allocated to high priority support needs,
and the progress of these support needs to be
closely monitored.
The most common ways of prioritization
mechanisms are using the following general
guidelines but its best to respond to all
requests as quickly as possible.
46
LO2:Prioritizing client support
requests
1. High Priority: - high priority is given where the
business critical system has got a problem. A significant
number of people are affected by an issue, a
customer’s computer crashed, the network
server is down, a virus attack, or there is a
security concern.
Example:
 The user is unable to login; the computer crashed; a
customer’s account is locked or the password needs to
be reset; a computer has been infected by a virus; an
entire student lab is down; if the network is inaccessible.
2. Medium Priority: A single customer is affected by a
problem but is still able to work, or there are problems with
a service but it is still functional.
Example:
LO2:Prioritizing client support
requests
3. Low Priority: Routine or maintenance
tasks.
Example:
A customer asks “how to” questions or
requests new software installations or
computer set up. The department requests
account creations or updates, directory
changes, or new file shares.
Referring requests to appropriate
person or department for assistance
This stage is the step at which we refer
client support requirements to respected
47
LO2:Prioritizing client
support requests
The priority of a support request is based upon its
severity and impact to an individual, a functional
unit, or the organization.
Priority levels help to determine which requests
require more immediate attention and assist in
providing the best possible service as quickly as
possible to our clients.
All support requests are serviced in order of the
priority assigned to them. This means that at any
given moment, a higher priority request may
require more immediate attention than lower
priority request.
If you feel that a support request’s priority needs to
be escalated(more serious), contact the staff
48
Severity Levels
Enhancement
Minor
Normal
Major
Critical
49
Severity Level: Critical
 This is the highest level of severity and should
only be assigned to issues that require
immediate attention.
 A critical issue is one which satisfies any of
the following criteria:
• Undermines business critical processes essential
to the mission of the organization.
• Prevents the effective use of any major service.
• Seriously affects a large number of computer
users.
• Causes a major threat to information security.
• Might severely impact the status of the
organization.
50
Severity Level: Critical
Examples
Hardware or software failure disturbing
activities of essential system and business
critical activities.
Information security vulnerability posing
risk to access, integrity, or confidentiality of
organization.
51
Severity Level: Major
 Major issues are those that pose a serious
impact to business processes if they are not
addressed quickly.
 A major issue is one which satisfies any of the
following criteria:
Prevents the effective use of any service and
affects a substantial number of computer users.
 Disrupts the activities of a substantial number
of computer users and no work around exists
Poses a minor threat to information security.
Might possibly impact the reputation of the
organization.
Creates very serious implication for an
52
Severity Level: Major
Examples
System unavailable to a percentage of the
organization’s users.
Failure disrupting activities of a functional
area.
Inability of user to access essential piece of
information.
53
Severity Level: Normal
 This represents the ‘typical’ problem, and
should be the most frequently assigned
level of severity.
 An issue which satisfies any of the
following criteria:
Prevents the use of any fully supported
service or application by an individual.
Disrupts the activities of a substantial
number of computer users, but a work
around exists.
Inconveniences the activities of a
substantial number of computer users.
Might imply a minor threat to information
54
Severity Level: Normal
Examples
Monitor/LCD screen is dead
Computer won’t boot
Software installation when software is
critical to job responsibilities
File system quota exceeded
Shared network printer down
55
Severity Level: Minor
 An issue creating minor business impact
as it does not threaten or impact
productivity.
 An issue which satisfies any of the
following criteria:
Causes inconvenience to an individual
Any problem in a "limited support" category
Examples
 CD-Drive non-functional
 Mouse is jumpy on the screen
 Questions regarding application features
 Installation of most peripheral devices
56
Severity Level:
Enhancement
 Enhancements are those issues that have
little to no business impact and do not
materially affect productivity.
 All issues that do not fall into the above
described levels of severity.
Examples
 Installations of software peripheral to
business functions
 Cosmetic enhancements (e.g. desktop
settings, browser settings, and favorites)
57
Prioritise client support request
using “Who, What, When, Where,
and Why” approach
Who: This attribute looked at the relative
importance of who or how many people
were affected by the problem. The
bigger the impact, the higher the points.
Higher points were also provided to special
cases like traveling users because we would
have limited access to their computers. Some
examples of the value picks we came up with
were: Entire Company, Sales Office,
Department, User, Traveling User, Lost
Sale, and Executive.
What: Here we would look at the service
58
Prioritise client support request
using “Who, What, When, Where,
and Why” approach
 When: This characterizes the type of
response needed. These value picks ranged
from Immediate to Same Day, Next Day, Next
Week, or No Hurry.
 Where: This attribute included Departments,
Airport, Hotel, and Home. A traveling user
in an airport, working on a sale, would be
allowed an immediate response, for instance.
 Why: This attribute clarified the nature of the
problem with value picks such as Not Working,
Intermittent Problem, Research, Question, or
Workaround
59
Prioritise client support request using “Who,
What, When, Where, and Why” approach
Caller number one
Client Problem: Corporate e-mail is down.
Who is affected Company 10
points
What is affected E-mail 10
points
When is response
needed
Immediate 10
points
Where is response
needed
Corporate
computer
room
10
points
Why is response Not working 10
60
Prioritise client support request using “Who,
What, When, Where, and Why” approach
Caller number two
Client Problem: Remote user cannot access e-
mail and will not need access until tomorrow.
Who is affected User 1 point
What is affected E-mail 10 points
When is response
needed
Next day 2 point
Where is response
needed
Home
office
1 point
Why is response
needed
Not
working
10 points
Total score 24 points
61
Prioritise client support request using “Who,
What, When, Where, and Why” approach
Caller number three
Client Problem: Company president with a
PowerPoint problem going on vacation and in no
hurry.
Who is affected User 1 point
What is affected PowerPoint 1 point
When is response
needed
Two weeks 5 points
Where is response
needed
Corporate office 1 point
Why is response
needed
Not working 10
points
62

Record-client-support-pptx.pdf

  • 1.
    Prepared by ITDepartment. UNIT OF COMPETENCE Record Client Support Requirements LEVEL-1 INFORMATION SHEET Mary Help College Department of Information Technology
  • 2.
    2 Learning Outcomes At theend of the module the learners will be able to: LO1: Log requests for support Record Client support requests and requirements according to organizational standards. Review client support history and details Check and request the information for accuracy and urgency according to organizational standards LO2: Prioritize support requests with appropriate personnel Identify guidelines for prioritising or rating client requests Prioritise client request based on its criticality or effect
  • 3.
    3 LO1: Client supportrequests and requirements Definition of Terms  Client:- A Client is an individual, an organization, business or an institution that may come in person or communicate using any communication means like telephone, e-mail, fax or online help desk to get technical support and consultation on technologies etc  Log – means recording client support requirements based on organizational rule, regulation and policies.  Escalate - transferring a helpdesk that cannot be resolved to personnel at a lower level such as an IT specialist or IT manager.  First level Support - usually refers to the initial support offered to a customer by a help desk operator; in this initial point of contact, the officer determines the nature of the call and will try to solve the problem if it is straightforward; support organizations usually have quite clear outlines of what constitutes first level support.  Priority - the value given to an incident, problem or change to indicate its relative importance in order to appropriately allocate resources and specify an appropriate time-frame for resolution.
  • 4.
    4 Service Level Agreement(SLA)- is a legal agreement / contract between a service provider and a client detailing the level of service that is provided, usually including what is covered, what is not covered, the response time for resolution. It describes the responsibilities and liabilities of all parties involved. Some of the contents of an SLA usually include the following:  Response-time guarantees (often based on the type of call and the SLA)  Equipment and/or software that will be supported  Where service will be provided  Preventive maintenance  Diagnostics  Part availability (equivalent parts)  Cost and penalties  Time of service availability LO1: Client support requests and requirements
  • 5.
    Call centers sometimeshave different names for level-one technicians. These technicians may be known as level-one analysts, dispatchers, or incident screeners. Regardless of the title, the level-one technician’s responsibilities are fairly similar from one call center to the next. The primary responsibility of a level-one technician is to gather applicable information from the customer. 5 Level-One Technician Responsibilities LO1: Client support requests and requirements
  • 6.
    Here is someof the information a level- one technician must obtain:  Contact information  Description of the problem  Priority of the problem  The computer’s manufacturer and model  The computer’s operating system  Whether the computer uses AC or DC power  Whether the computer is on a network and, if so, whether it is a wired or wireless connection  If a specific application was being used when the problem occurred  If any new drivers or updates have been installed recently and, if so, what they are  Some problems are very simple to resolve, and a level- one technician usually can take care of these without 6 Level-One Technician Responsibilities LO1: Client support requests and requirements
  • 7.
    7 Level-One Technician Responsibilities LO1:Client support requests and requirements
  • 8.
    The level-two technicianis usually more knowledgeable than the level-one technician about technology, or has been working for the company for a longer period of time. When a problem cannot be resolved within ten minutes, the level-one technician prepares an escalated work order. The level-two technician receives the escalated work order with the description of the problem. That person then calls the customer back to ask additional questions and resolve the 8 Level-Two Technician Responsibilities LO1: Client support requests and requirements
  • 9.
    The following listof guidelines details when to escalate a problem to a more experienced technician. These are generic guidelines; you should follow your company’s business policy for problem escalation. ■ Escalate problems that require opening the computer case. ■ Escalate problems that require installing applications, operating systems, or drivers. ■ Escalate problems that will take a long time to walk a customer through, such as Configuration Memory Operating System 9 Level-Two Technician Responsibilities LO1: Client support requests and requirements
  • 10.
    10 What is aclient support? Client support is a service that computer and software manufacturers, and other third-party service companies, offer to clients. Providing good IT supports for clients is vital to the effective operation of any organisations, so you may find there are established procedures for determining and addressing client support issues. For personal computer products, the following are common client- support options:  mail-in service: The manufacturer will repair your equipment if you mail it in. Typical turnaround time is about four days. In some service plans, the manufacturer charges you for shipping expenses.  carry-in service: The manufacturer will repair your equipment, but you must deliver it to a local service site. This is sometimes called depot service. LO1: Client support requests and requirements
  • 11.
    11 Client-support options… On-site contract:For a monthly or annual fee, a repair person will come to your site to fix problems. (The fee is included in the purchase price of some machines.) Most on-site contracts guarantee that the service will be rendered within a fixed number of hours from when you report a problem. Hot lines: Many software manufacturers provide a phone number that you can call for advice and trouble-shooting. Often the number is toll- free. The quality of this type of support varies considerably from one company to another. Some hot lines are so good that they enable you to solve most problems yourself. Others are so bad that you are unable even to get through. bulletin board system : Some companies maintain electronic bulletin boards (or forums within online services) staffed by service engineers. If you have a modem, you can report a problem to the bulletin board and a technician will respond. This can be convenient because bulletin boards are usually open 24 hours a day. Also, bulletin boards enable you to download software updates that correct known bugs. LO1: Client support requests and requirements
  • 12.
    Describe Good CommunicationSkills and Professional Behavior Whether you are talking with a customer on the phone or in person, it is important to communicate well and to represent yourself professionally. Your professionalism and good communication skills will enhance your creditability with the customer. A customer can “see” your body language. A customer can hear your sighs and sense that you are sneering, even over the phone. Conversely, customers can also sense that you are smiling when you speak with them on the phone. Many call- center technicians have a mirror at their desk to monitor their facial expressions. Successful technicians control their reactions and 12 LO1: Client support requests and requirements
  • 13.
    Determine the Customer’sComputer Problem Remember these three rules at the beginning of your conversation: ■ Know: Call your customer by name. ■Relate: Use brief communication to create a one-to-one connection between you and your customer. ■ Understand: Determine the customer’s level 13 LO1: Client support requests and requirements
  • 14.
    To accomplish thesetasks, you should practice active listening skills. Allow the customer to tell the whole story. As the customer is explaining the problem, occasionally interject a small word or phrase, such as “I understand,” “Yes,” “I see,” or “Okay.” This behavior lets the customer know that you are there and listening. This is not the same as interrupting the customer to ask a question or make a statement. A technician should not interrupt the 14 Determine the Customer’s Computer Problem(cont…) LO1: Client support requests and requirements
  • 15.
    Many times ina conversation, you might find yourself thinking about what to say before the other person finishes talking. When you do this, you are not really listening. As practice, try listening carefully when other people speak, and let them finish their thoughts. After you have listened to the customer explain the whole problem, clarify what the person has said. This helps encourage the customer that you have heard and understand the situation. A good practice for clarification is to 15 Determine the Customer’s Computer Problem(cont…) LO1: Client support requests and requirements
  • 16.
    When dealing withcustomers, you must be professional in all characteristics of your role. You must handle customers with respect and prompt attention. When on the phone, make sure that you know how to put a customer on hold, as well as how to transfer a customer without losing the call. How you conduct the call is important. Your job is to help the customer focus on and communicate the problem so that you can solve it. Be positive when communicating with the customer. Tell him what you can do. Do not 16 Display Professional Behavior with the Customer LO1: Client support requests and requirements
  • 17.
    Customers will quicklysense whether you are interested in helping them. Here are some recommendations to follow before you put a customer on hold. First, let the customer finish speaking. Then, explain that you have to put him on hold, and ask him for permission to do so. When the customer agrees to be put on hold, thank him. Tell him that you will be away only a few minutes, and explain what you will be 17 Display Professional Behavior with the Customer(cont…) LO1: Client support requests and requirements
  • 18.
    18 ustomer Communication Dosand Don’ts Display Professional Behavior with the Customer LO1: Client support requests and requirements
  • 19.
    19 Observe the followinglist of things you should avoid when communicating with a customer: ■ Minimizing customer problems. ■ Using jargon, abbreviations, and acronyms. ■ Displaying a negative attitude or using a negative tone of voice. ■ Arguing with customers or becoming defensive. ■ Being judgmental or insulting or calling the customer names. ■ Distractions and interruptions when talking with customers. ■ Unnecessary and unexpected holds. Display Professional Behavior with the Customer LO1: Client support requests and requirements
  • 20.
    20  Part ofyour job is to focus the customer during the phone call. Keeping the customer focused on the problem allows you to control the call. This makes the best use of your time and the customer’s time on troubleshooting the problem. Do not take any comments personally, and do not retaliate with comments or criticism. If you stay calm, finding a solution to the problem remains the focal point of the call. Focus the Customer on the Problem During the Call LO1: Client support requests and requirements
  • 21.
    21 Just as thereare many different computer problems, there are many different types of customers. 1. Talkative Customer 2. Rude Customer 3. Angry Customer 4. Knowledgeable Customer 5. Inexperienced Customer Focus the Customer on the Problem During the Call LO1: Client support requests and requirements
  • 22.
    22 Talkative Customer A talkativecustomer discusses everything except the problem. This kind of customer often uses the call as an opportunity to socialize. It can be difficult to get a talkative customer to focus on the problem. LO1: Client support requests and requirements Focus the Customer on the Problem During the Call
  • 23.
    23 Rude Customer A rudecustomer complains during the call and often makes negative comments about the product, the service, and the technician. This type of customer is sometimes abusive and uncooperative and is easily aggravated. LO1: Client support requests and requirements Focus the Customer on the Problem During the Call
  • 24.
    24 Angry Customer An angrycustomer talks loudly during the call and often tries to speak when the technician is talking. Angry customers are usually frustrated that they have a problem and upset that they have to call somebody to fix it. LO1: Client support requests and requirements Focus the Customer on the Problem During the Call
  • 25.
    25 Knowledgeable Customer A knowledgeablecustomer wants to speak with a technician who is equally experienced in computers. This type of customer usually tries to control the call and does not want to speak with a level-one technician. LO1: Client support requests and requirements Focus the Customer on the Problem During the Call
  • 26.
    26 Inexperienced Customer An inexperiencedcustomer has difficulty describing the problem. These customers usually can’t follow directions or communicate the errors they encounter. LO1: Client support requests and requirements Focus the Customer on the Problem During the Call
  • 27.
    27 LO1: Client supportrequests and requirements Client Support Roles The most important skills needed by the IT professional who is working as a help desk person to record the clients’ support requirement are: Courteous and Professional manner Active listening skill Following call handling processes Following organizational rules and regulations Good Communication Skill Technical skill
  • 28.
    28 LO1: Client supportrequests and requirements i) Courteous and Professional manner When dealing with clients, it is important for you to ensure you establish and maintain a courteous and professional manner. To be courteous means to show good manners and respect for the clients’ opinions and needs. To be professional means to conduct yourself in a manner that is mature, responsible and fair. When dealing with clients in a workplace
  • 29.
    29 LO1: Client supportrequests and requirements ii) Active Listening Skill  When you are dealing with client , it is critical that you listen carefully to the facts and respond appropriately. To do this, people often use a technique called active listening. Active listening occurs when you focus on the message you’re receiving from the other person, without thinking about what you want to say next. Your response to the client is one that paraphrases what you’ve heard. That is, you summarise what you’ve heard, and say it back to the sender in your words. This ensures that you have understood the idea the client wants
  • 30.
    30 LO1: Client supportrequests and requirements iii) Call handling processes General Guidelines Handling a Telephone Call All telephone calls shall be answered on time and in a professional and courteous manner Telephones should be answered within three (3) rings and it becomes each employee’s job to answer it. Most organisations require their staff to answer the telephone with a greeting, identifying the organisation, the department/section, their name and offering help with an opening statement. For example:
  • 31.
    31 LO1: Client supportrequests and requirements Guidelines… Stop talking and focus your attention on the caller or avoid distractions and Concentrate on what the client is saying. Show interest and concern to the reason for the call. Find out what the caller needs and don't be afraid to ask the caller questions to find out his or her concerns. If you have determined you are not the person they should talk to, apologize to the caller and briefly explain why you are unable to assist him or her. Give the caller the correct telephone number and the person's name which can assist him or her.
  • 32.
    32 LO1: Client supportrequests and requirements iv) Following organizational rules and regulations Every client interaction should be guided by the policies and guidelines of the organisation. These policies and guidelines are often documented, but can also be established ways of behaving that form part of the culture of the organisation. Why you need Organizational Rules and regulations To have professional conduct To standardise the interactions between IT Technician and clients. To ensure the process of supporting clients runs smoothly.
  • 33.
    33 LO1: Client supportrequests and requirements v) Good Communication Skill Whether you are talking with a client on the phone or in person, it is important to communicate well and to represent yourself professionally.  Good communication skills will enhance your creditability with the client. Successful technicians control their reactions and emotions from one client call to the next. A good rule for all technicians to follow is that a new customer call means a
  • 34.
    LO1: Client supportrequests and requirements You can develop more effective communication skills by practicing the following techniques: 1. MAINTAINING EYE CONTACT: Look into the other person’s eyes while speaking or listening... It shows that your are interested and paying attention. 2. LISTENING: To avoid misunderstandings, give the other person a chance to put their point across without interruptions. 3. LEADING: Make comments and ask questions that encourage the other person to continue communicating in the direction you want. vi) Technical skill 34
  • 35.
    35 LO1: Client supportrequests and requirements Help Desk and Support A help desk is simply a person who handle phone call of client’s problems and a more or less has organized idea of how to solve the problems that come in. A Help Desk is the one in charge of recording/logging client support request and enter them into a centralized database program that is designed to track client support requirements. A Help Desk is someone who help the customer to fix there problems or who gives support. Clients may request support : By calling a telephone or by email They may come in person /coming to office/
  • 36.
    36 LO1: Client supportrequests and requirements Support is typically provided for the following IT Problems area:  Hardware and software faults  Networking problems (including login problems)  Email and Internet problems  Consultation on purchasing information technologies  Installation and configuration hardware  Training needs  Printing problems  Software installation and upgrade etc In many organisations, help desk operators attempt to fix straightforward problems. This is known as first level support.
  • 37.
    37 LO1: Client supportrequests and requirements In some organizations, operators simply log calls, which are then allocated to the appropriate technical staff. The proportion of problems that can be handled at the first point of contact will depend on the skill and training of the help desk staff. Recording Client’s support Request If you are on the help desk and a client rings, fax, e-mail or come in person and request for support, what details do you ask them to provide?
  • 38.
    38 LO1: Client supportrequests and requirements Data required Entry Log number: Help Desk Operator’s name: Date and time of client request: Client’s name: Client’s contact details: Section and location: Problem logged: Date and time problem occurred: Computer/peripheral affected Impact of the problem on operations/business: First line support provided (if any): Escalate to support staff? Yes/No Support staff request details: Date and time reported: Name of support staff: Sample of a typical data entry form
  • 39.
    39 LO1: Client supportrequests and requirements Example: Recording/logging a client request First Request: Details: The 1st client who’s name is Terefe from the Ministry of Education, Arat Kilo with a contact number 0912345678 call you today at 12 o’clock and asking help for network server failure he encounter the problem yesterday at 4 o’clock so he cannot connect to the website. Second Request: Details: The 2nd client who’s name is Mispin from the ECBP, Bole Road with a contact number 0913756347 send you an email today at 11 o’clock requesting for support of upgrading his Microsoft Office 2003
  • 40.
    40 LO1: Client supportrequests and requirements . Data required Entry Log number: 001 Help Desk Operator’s name: Ato Dereje Alemu Date and time of client request: 05-12-2012, at 12 o’clock Client’s name: Terefe Client’s contact details: Addis Ababa, contact number 0912345678 Section and location: Ministry of Education, Arat Killo Problem logged: Network server failure Date and time problem occurred: 04-12-2012 at 4 o’clock Computer/peripheral affected Server Computer Impact of the problem on operations/business: Cannot connect to the website First line support provided (if any): Not provided Escalate to support staff? Yes/No Yes Support staff request details: Date and time reported: 07-12-2012, at 12 o’clock Name of support staff: IT Specialist
  • 41.
    41 LO1: Client supportrequests and requirements Reviewing Client Support History Reviewing client support history means checking the client support request database for the same problems. This is very important to overcome the following main challenges one may face while working as a Help Desk IT professional.  It enables to find easily how the previously logged problem is solved  It eliminates redundancy of recording the same problem  It enables easily identify the problems solved from the one in queue  It enables the responsible IT staff for the
  • 42.
    Self Check 1. Whatis a good rule for a call center technician to follow? A. Be proactive by avoiding speaking with upset or angry customers. B. Consider each new customer call a fresh start. C. Go with your first impression of the customer, and use Netiquette. D. Focus on how to repair the problem while the customer is speaking. 42 B. Consider each new customer call a fresh start.
  • 43.
    Self Check 2. Whatis an SLA? A. An itemized record detailing all levels of service performed on equipment covered by a manufacturer warranty B. A legal agreement between a customer and a service technician confirming specific services performed on equipment not covered by any warranty C. A legal agreement between a customer and the service vendor confirming a specific level of support D. A legal record of customer invoices 43 C. A legal agreement between a customer and the service v
  • 44.
    44 LO2:Prioritizing client support requests Identifyingrelevant guidelines for prioritizing or rating client requests There should be some mechanism used to prioritize service request that come from clients. In many organizations there are rules and policies that govern prioritization issues. The most important factor taken into consideration is:-  Business Critical System – the interruption of such system directly affects the production, profit of the organization or the business. It results in bankruptcy, frustration, disappointment etc  Urgency of the service requested
  • 45.
    45 LO2:Prioritizing client support requests Prioritizeclient requests based on criticality or impact on the business Some client support requests will be allocated a high priority, as they involve critical IT functions which cannot be carried out until the problem is resolved. Extra resources may have to be allocated to high priority support needs, and the progress of these support needs to be closely monitored. The most common ways of prioritization mechanisms are using the following general guidelines but its best to respond to all requests as quickly as possible.
  • 46.
    46 LO2:Prioritizing client support requests 1.High Priority: - high priority is given where the business critical system has got a problem. A significant number of people are affected by an issue, a customer’s computer crashed, the network server is down, a virus attack, or there is a security concern. Example:  The user is unable to login; the computer crashed; a customer’s account is locked or the password needs to be reset; a computer has been infected by a virus; an entire student lab is down; if the network is inaccessible. 2. Medium Priority: A single customer is affected by a problem but is still able to work, or there are problems with a service but it is still functional. Example:
  • 47.
    LO2:Prioritizing client support requests 3.Low Priority: Routine or maintenance tasks. Example: A customer asks “how to” questions or requests new software installations or computer set up. The department requests account creations or updates, directory changes, or new file shares. Referring requests to appropriate person or department for assistance This stage is the step at which we refer client support requirements to respected 47
  • 48.
    LO2:Prioritizing client support requests Thepriority of a support request is based upon its severity and impact to an individual, a functional unit, or the organization. Priority levels help to determine which requests require more immediate attention and assist in providing the best possible service as quickly as possible to our clients. All support requests are serviced in order of the priority assigned to them. This means that at any given moment, a higher priority request may require more immediate attention than lower priority request. If you feel that a support request’s priority needs to be escalated(more serious), contact the staff 48
  • 49.
  • 50.
    Severity Level: Critical This is the highest level of severity and should only be assigned to issues that require immediate attention.  A critical issue is one which satisfies any of the following criteria: • Undermines business critical processes essential to the mission of the organization. • Prevents the effective use of any major service. • Seriously affects a large number of computer users. • Causes a major threat to information security. • Might severely impact the status of the organization. 50
  • 51.
    Severity Level: Critical Examples Hardwareor software failure disturbing activities of essential system and business critical activities. Information security vulnerability posing risk to access, integrity, or confidentiality of organization. 51
  • 52.
    Severity Level: Major Major issues are those that pose a serious impact to business processes if they are not addressed quickly.  A major issue is one which satisfies any of the following criteria: Prevents the effective use of any service and affects a substantial number of computer users.  Disrupts the activities of a substantial number of computer users and no work around exists Poses a minor threat to information security. Might possibly impact the reputation of the organization. Creates very serious implication for an 52
  • 53.
    Severity Level: Major Examples Systemunavailable to a percentage of the organization’s users. Failure disrupting activities of a functional area. Inability of user to access essential piece of information. 53
  • 54.
    Severity Level: Normal This represents the ‘typical’ problem, and should be the most frequently assigned level of severity.  An issue which satisfies any of the following criteria: Prevents the use of any fully supported service or application by an individual. Disrupts the activities of a substantial number of computer users, but a work around exists. Inconveniences the activities of a substantial number of computer users. Might imply a minor threat to information 54
  • 55.
    Severity Level: Normal Examples Monitor/LCDscreen is dead Computer won’t boot Software installation when software is critical to job responsibilities File system quota exceeded Shared network printer down 55
  • 56.
    Severity Level: Minor An issue creating minor business impact as it does not threaten or impact productivity.  An issue which satisfies any of the following criteria: Causes inconvenience to an individual Any problem in a "limited support" category Examples  CD-Drive non-functional  Mouse is jumpy on the screen  Questions regarding application features  Installation of most peripheral devices 56
  • 57.
    Severity Level: Enhancement  Enhancementsare those issues that have little to no business impact and do not materially affect productivity.  All issues that do not fall into the above described levels of severity. Examples  Installations of software peripheral to business functions  Cosmetic enhancements (e.g. desktop settings, browser settings, and favorites) 57
  • 58.
    Prioritise client supportrequest using “Who, What, When, Where, and Why” approach Who: This attribute looked at the relative importance of who or how many people were affected by the problem. The bigger the impact, the higher the points. Higher points were also provided to special cases like traveling users because we would have limited access to their computers. Some examples of the value picks we came up with were: Entire Company, Sales Office, Department, User, Traveling User, Lost Sale, and Executive. What: Here we would look at the service 58
  • 59.
    Prioritise client supportrequest using “Who, What, When, Where, and Why” approach  When: This characterizes the type of response needed. These value picks ranged from Immediate to Same Day, Next Day, Next Week, or No Hurry.  Where: This attribute included Departments, Airport, Hotel, and Home. A traveling user in an airport, working on a sale, would be allowed an immediate response, for instance.  Why: This attribute clarified the nature of the problem with value picks such as Not Working, Intermittent Problem, Research, Question, or Workaround 59
  • 60.
    Prioritise client supportrequest using “Who, What, When, Where, and Why” approach Caller number one Client Problem: Corporate e-mail is down. Who is affected Company 10 points What is affected E-mail 10 points When is response needed Immediate 10 points Where is response needed Corporate computer room 10 points Why is response Not working 10 60
  • 61.
    Prioritise client supportrequest using “Who, What, When, Where, and Why” approach Caller number two Client Problem: Remote user cannot access e- mail and will not need access until tomorrow. Who is affected User 1 point What is affected E-mail 10 points When is response needed Next day 2 point Where is response needed Home office 1 point Why is response needed Not working 10 points Total score 24 points 61
  • 62.
    Prioritise client supportrequest using “Who, What, When, Where, and Why” approach Caller number three Client Problem: Company president with a PowerPoint problem going on vacation and in no hurry. Who is affected User 1 point What is affected PowerPoint 1 point When is response needed Two weeks 5 points Where is response needed Corporate office 1 point Why is response needed Not working 10 points 62