This milk thermometer was designed to help you steam milk to the perfect temperature, as well as to help you achieve glossy, creamy microfoam.
Beeps when you reach or exceed your milk goal temperature. Stops beeping when you pour the milk out, so you can make one drink after another.
Experts know to stop foaming at 40°C/104°F and then plunge the steam wand until the final milk temperature is reached. Achieve this now with ease.
Single-button-press presets for less-warm (60°C/140°F), normal (65°C/150°F), and extra-hot (70°C/160°F). Or set the exact temperature in 1° increments.
The clip shape holds the display aside the milk jug, thermoprobe centered. The temperature face doesn't obstruct your view of the frothing surface.
The beep sound is loud enough to be audible over the steam wand noise (it's high pitched) but not so loud as to be annoying (we've muffled it slightly).
Two versions available: Celsius and Fahrenheit.
Water, steam and shock resistant silicone sleeve.
Turns off after 5 minutes at the same temperature and no button presses. Permanently stays on if over 50°C.
Analog thermometers, and many digital thermometers, typically have a 10 second delay.
Our digital thermometer has a fast 2 second delay to accurate temperature.
Expect a 3°C to 5°C increase in temperature between when you stop the steam and the final resting temperature.
Compare this to others, which typically have a 10°C to 15°C increase from steam stopping.
Range: 0°C-200°C
Resolution: 1°C.
Accuracy: +/- 0.5°C.
Speed: 2 to 4 seconds.
Probe: SS304 stainless steel.
Requires two LR44 batteries for 200 hours of continuous use.
Due to changing mail security regulations, we are not always able to include the batteries to your country, but they are widely available elsewhere at low cost.
We will include the batteries if we are allowed to.
Location of batteries inside the packaging.
Other equivalent batteries