Page 1/5
Material Safety Data Sheet
According to 91/155 EC
Printing date 31.03.2004 * Reviewed on 12.03.2003
1 Identification of substance
Product details Trade name: SurTec 086 Article number(s): 4184, 4185 Manufacturer / Supplier: SurTec Deutschland GmbH SurTec-Strae 2 D-64673 Zwingenberg Informing department: Technical central Tel.: +49-6251-171-700, Fax: +49-6251-171-800 Emergency information: Poison Information Mainz (Germany), Tel.: +49-6131-19240 Tel. : +49-6251-171-700 Fax : +49-6251-171-800 e-mail: [email protected] internet: www.surtec.com
2 Composition/Data on components
Chemical characterization: Mixture of the substances listed below with (harmless) additions. Dangerous components: 146340-16-1 modific. fatty alcohol polyglycol ether Xi; R 38 Application: Recycable Tensidebooster for Alkaline Sprayapplications 15 - 30%
3 Hazards identification
Hazard designation: Xi Irritant
Information pertaining to particular dangers for man and environment: R 38 Irritating to skin. Classification system: The classification is in line with current EC lists. It is expanded, however, by information from technical literature and by information furnished by supplier companies.
4 First aid measures
General information: Instantly remove any clothing soiled by the product. after inhalation: Supply fresh air; consult doctor in case of symptoms. after skin contact: Instantly wash with water and soap and rinse thoroughly. If skin irritation continues, consult a doctor. after eye contact: Rinse opened eye for several minutes under running water. If symptoms persist, consult doctor. after swallowing: Rinse out mouth and then drink plenty of water. In case of persistent symptoms consult doctor.
5 Fire fighting measures
Suitable extinguishing agents: Use fire fighting measures that suit the environment.
(Contd. on page 2)
GB
DR
Page 2/5
Material Safety Data Sheet
According to 91/155 EC
Printing date 31.03.2004 Trade name: SurTec 086
(Contd. of page 1)
Reviewed on 12.03.2003
Protective equipment: No special measures required.
6 Accidental release measures
Person-related safety precautions: Ensure adequate ventilation. Use breathing protection against the effects of fumes/dust/aerosol. Measures for environmental protection: If material reaches soil, water bodies or sewage system inform authorities responsible for such cases. Do not allow product to reach sewage system, water bodies, ground or soil. Measures for cleaning/collecting: Ensure adequate ventilation. Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust). Clean the accident area carefully; suitable cleaners are: Warm water Additional information: See Section 13 for information on disposal.
7 Handling and storage
Handling Information for safe handling: Ensure good ventilation/exhaustion at the workplace. Information about protection against explosions and fires: The product is not flammable. Storage Requirements to be met by storerooms and containers: Prevent any penetration into the ground. Further information about storage conditions: Keep container tightly sealed. Protect from frost. The stability which is noticed on the label is only duty by right storage of the product. Recommended storage temperature: Not store under -6 C - sensitive to freeze
8 Exposure controls and personal protection
Components with critical values that require monitoring at the workplace: The product does not contain any relevant quantities of materials with critical values that have to be monitored at the workplace. Additional information: The lists that were valid during the compilation were used as basis. Personal protective equipment General protective and hygienic measures: Keep away from foodstuffs, beverages and food. Instantly remove any soiled and impregnated garments. Wash hands during breaks and at the end of the work. Use skin protection cream for preventive skin protection. Avoid contact with the eyes and skin. Breathing equipment: Only during spraying without adequate removal by suction. Protection of hands: Rubber gloves Eye protection: Tightly sealed safety glasses
9 Physical and chemical properties
General Information Form: Colour: liquid colourless yellowish
(Contd. on page 3)
GB
DR
Page 3/5
Material Safety Data Sheet
According to 91/155 EC
Printing date 31.03.2004 Trade name: SurTec 086
(Contd. of page 2)
Reviewed on 12.03.2003
Odour:
weak, characteristic
Change in condition Boiling point/Boiling range: > 100 C Cloud point/clarification point: 25 C ((1 Gew.%)) Flash point: Danger of explosion: Steam pressure at 20 C: Density at 20 C: Solubility in / Miscibility with Water: pH-value at 20 C: Viscosity: > 100 C Product is not explosive. ~ 23 mbar 1.002 g/cm3 fully miscible 6-7 fluid, watery
10 Stability and reactivity
Thermal decomposition / conditions to be avoided: No decomposition if used and stored according to specifications. Dangerous reactions: No dangerous reactions known. Dangerous products of composition: No dangerous decomposition products known. *
11 Toxicological information
Acute toxicity Primary irritant effect: on the skin: Irritant for skin and mucous membranes. on the eye: No irritant effect. Additional toxicological information: Irritant The product shows the following dangers according to the calculation method of the General EC Classification Guidelines for Preparations as issued in the latest version:
12 Ecological information
Additional ecological information: AOX-indication: The product does not contain organically bonded halogen compounds. General notes: In accordance with the requirements of the RVO on the Act on Detergents and Cleansing Agents, tensides are biodegradable up to at least 90 %.(Germany) Do not allow product to reach ground water, water bodies or sewage system, even in small quantities. Do not allow product to reach ground water, water bodies or sewage system. Danger to drinking water if even small quantities leak into soil.
13 Disposal considerations:
Product: Recommendation: After prior treatment product has to be disposed of in an incinerator for hazardous waste under adherence to the regulations pertaining to the disposal of particularly hazardous waste. Waste disposal key number: 12 03 01, aqueous washing liquids Suggestion according to the Euroean Waste Catalogue (EWC):
(Contd. on page 4)
GB
DR
Page 4/5
Material Safety Data Sheet
According to 91/155 EC
Printing date 31.03.2004 Trade name: SurTec 086
(Contd. of page 3)
Reviewed on 12.03.2003
The mentioned waste codes are recommendations based on the product application as suggested by the manufacturer. Special applications and special disposal conditions at the applier's place may however require another waste code. Uncleaned packagings: Recommendation: Disposal must be made according to official regulations. Empty contaminated packagings thoroughly. They can be recycled after thorough and proper cleaning. Recommended cleaning agent: Water, if necessary with cleaning agent. *
14 Transport information:
Land transport ADR/RID (cross-border) ADR/RID Class: Maritime transport IMDG IMDG Class: Air transport ICAO-TI and IATA-DGR ICAO/IATA Class: Additional information: No dangerous goods in accordance with the above orders.
15 Regulatory information
Designation according to EC guidelines: The product has been classified and labelled in accordance with EC Directives / Ordinance on Hazardous Materials (GefStoffV). Code letter and hazard designation of product: Xi Irritant
Risk phrases: 38 Irritating to skin. Safety phrases: 28 After contact with skin, wash immediately with plenty of soap and water. 37 Wear suitable gloves. 60 This material and its container must be disposed of as hazardous waste. National regulations Water hazard class: Water hazard class 2 (Self-assessment): hazardous for water
16 Other information:
These data are based on our present knowledge. However, they shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship. Relevant R-phrases 38 Irritating to skin. Department issuing MSDS: Product Safety Department Contact: Mr. Dipl.-Chem. B. Hferth, Tel.: +49-6251-171-754 Mr. Dipl.-Ing. O. Penz, Tel.: +49-6251-171-725 (Deputy) Output nr.: 7 - Replaced MSDS from 15/09/1997 Reviewed: General changes Classification/Designation
(Contd. on page 5)
GB
DR
Page 5/5
Material Safety Data Sheet
According to 91/155 EC
Printing date 31.03.2004 Trade name: SurTec 086
(Contd. of page 4)
Reviewed on 12.03.2003
Informations about dangerous components Changes have been significated with a "*" on the left side of the sheet.
GB
DR
