Scribd
Upload
257 views2 pages

Field Fresh, Ludhiana Design of Intermediate Stiffeners:: 1. Unstiffened Web

The document analyzes the design of intermediate stiffeners for a steel beam with a 1250 mm deep web and 8 mm thick web. It determines that: 1) An unstiffened web is not applicable. 2) Only vertical stiffeners are required, with a minimum spacing of 1410 mm. 3) Horizontal stiffeners are not required. It designs vertical stiffeners consisting of 8 x 95 mm flat sections spaced at 1410 mm with 3 x 80 mm intermittent fillet welds at 128 mm spacing.

Uploaded by

4geniecivil
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
257 views2 pages

Field Fresh, Ludhiana Design of Intermediate Stiffeners:: 1. Unstiffened Web

The document analyzes the design of intermediate stiffeners for a steel beam with a 1250 mm deep web and 8 mm thick web. It determines that: 1) An unstiffened web is not applicable. 2) Only vertical stiffeners are required, with a minimum spacing of 1410 mm. 3) Horizontal stiffeners are not required. It designs vertical stiffeners consisting of 8 x 95 mm flat sections spaced at 1410 mm with 3 x 80 mm intermittent fillet welds at 128 mm spacing.

Uploaded by

4geniecivil
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 2

FIELD FRESH, LUDHIANA

Design of Intermediate Stiffeners:

Max Shear Force = 224 KN


Depth of the Web = 1250 mm
Thickness of the Web = 8 mm
Yield Strength of Steel = 345 N/mm2

1. UnStiffened Web :
For Unstiffened Web Minimum Thickness Required.

Case-1 :
t = dx Tva,cal
816
Tva,cal = V / (d x t) = 22.4 N/mm2

t = 7.25 mm

Case-2 :
t = d x Fy = 17.3 mm
1344

Case-3 :
t = d / 85 = 14.7 mm

UNSTIFFENED WEB IS [NOT APPLICABLE]

2. Stiffened Web :

Vertical Stiffener :
For Vertical Stiffened Web Minimum Thickness Required.
Case-1 :
t = d x Fy = 7.3 mm
3200

Case-2 :
t = d / 200 = 6.25 mm

VERTICAL STIFFENERS ARE [ONLY VERTICAL STIFFENER REQUIRED]

Horizontal Stiffener :
For Horizontal Stiffened Web Minimum Thickness Required.
Case-1 :
t = d x Fy = 5.8 mm
4000

Case-2 :
t = d / 250 = 5 mm

HORIZONTAL STIFFENERS ARE [NOT REQUIRED]


VERTICAL STIFFENER DESIGN :

Maximum Clear Spacing between Stiffeners = 180x Thickness of Web


= 1440 mm
Provide Vertical Stiffeners at = 1410 mm C/C 95 mm

d/t = 156.25 WEB

From Table 6.6B of IS:800-1984


c = 1.5d
Tva = 98 > 22.4 N/mm2 [SAFE] 1410 mm

- Minimum Thickness Required for Vertical Stiffener

t = V / (d x Tva) = 1.82 mm
8 mm
Provide a Flat Section as Vertical Stiffener of Thickness = t = 8 mm

- Maximum Out Stand of Vertical Stiffener = 12x t = 96 mm

Provide a Flat Section as Vertical Stiffener of Length = L = 95 mm

- Minimum Moment of Inertia Required = (1.5x d^3 x t^3) / c^2

= 8883.769 mm4

Moment of Inertia Provided = (t x L^3)/12 + t x L x ( L /2)^2


= 2286333 mm4 [SAFE]

Provide a Flat Section of Size 8 x 95 @ 1410 mm


Thickness Length Spacing
CONNECTIONS:

Shear Force = 125x t^2 / L = 84.21 N/mm

Let us Provide a 3 mm Thick intermitted Fillet Weld.


Stength of the Weld /mm = 226.8 N/mm [SAFE]

Length of the Weld = 10 x t = 80 mm

Spacing of Weld = 16 x t = 128 mm

Provide Intermitted Fillet Weld of 3 x 80 @ 128 mm


Thickness Length Spacing

You might also like