NMEICT-MHRD (Govt.

of India) Project on - Creation of e-Contents on Fermentation Technology

Module-22: An Ideal Fermenter Parameters & Basic Functions

What is Fermenter?

 A fermenter is an apparatus that maintains required optimal environmental conditions

for the growth of industrially important microorganisms, used in large scale
fermentation process and in the commercial production of a range of fermentation
products like Antibiotics, Enzymes, Organic acids, Alcoholic beverages etc.

 To provide a controlled physico-chemical environment for the growth of a pure

culture or a well-defined mixed culture of microorganisms is the key function of an
ideal fermenter to obtain the desired fermentation products

 An ideal fermenter maintains optimal environmental conditions throughout the

process for the process organisms, added substrates and additives for a quality end
product

 Saving of energy and cost effective operation is very important concern as far as
fermentation economics is concern

 Many times, the terms “Bioreactor” and “Fermenter” are used synonymously. There
is a very minor difference between these two

 The bioreactor is used for the mass culture of plant and animal cells, while fermenter
is mainly used for microbial culture

 The operational parameters and design engineering of fermenters and bioreactors are
identical.

Parameters of an ideal fermenter

A fermenter should……..

 Facilitate the growth of a wide range of organisms capable of producing a varieties of

fermentation products

 Do not allow entry to any sort of unwanted microorganisms thus to provide operation
free from contamination

 Maintain a specific required temperature

 Provide adequate aeration and agitation to meet the metabolic requirements of the
organisms during the process to attain mass and heat transfer within the system
without damaging the process organisms

 Control the pH of the culture throughout the process

 Have provision of constant monitoring and control of level of dissolved oxygen

 Allow feeding of nutrient solutions and other supplementary requirements

Project control No: RE-02091011297, Christ College, Rajkot, Gujarat, India

 NMEICT-MHRD (Govt. of India) Project on - Creation of e-Contents on Fermentation Technology

 Provide access points for seed culture inoculation and sampling during the process

 Reduce liquid loss from the vessel during process by cooling system

 Be capable of being operated aseptically during the tenure of the process thus
fulfilling the requirements of containment regulations

 Ensure that overall process period should have power consumption, as low as possible

 Be designed in such a way that it require the minimal use of labours during
production process and downstream operations (i.e. harvesting, cleaning and
maintenance)

 Should be suitable for a range of processes along with the containment regulations

 Be constructed in such a way that it ensure even internal surfaces, using welds
instead of flange joints whenever possible

 Should have identical geometry at different operational level (i.e. both smaller and
larger vessels in the pilot or scale-up plant)

 The material from which the fermenter is made up of should be inert and capable to
withstand repeated stem sterilization conditions
 Apart from all these parameters, it is very imperative to have adequate service
provisions for individual plants. The important service provisions are listed below.

 Provision of compressed as well as sterile compressed air

 Provision of chilled water, cold water and hot water
 Facility to supply steam (high pressure) and steam condensate
 Provision of continuous electricity and stand-by generator
 Confine and well protected storage facilities for media components
 Availability of control and monitoring equipment for fermenters
 Provision of instrument maintenance facilities
 Facilities for extraction and recovery equipment
 Arrangement of convenience and easy excess delivery of materials
 Appropriate containment facilities
 Facility for appropriate effluents treatment of generated from the production unit
 A well-equipped workshop for minor mechanical and electrical repair under urgent
situation

Project control No: RE-02091011297, Christ College, Rajkot, Gujarat, India

 NMEICT-MHRD (Govt. of India) Project on - Creation of e-Contents on Fermentation Technology

Functions of different parts of a fermenter

Vessel: Size and Material

 Function of a fermenter is to carryout process under appropriate aseptic and pre-

defined environmental conditions

 A fermentation vessel is designed in such a way that it requires minimal labour

operation and maintenance

 It should have even internal surfaces with a similar geometry

 The volume capacity of the fermenter vary at different stages

 From laboratory experimental models with volume capacity of one or two litres, pilot
scale fermenter up to one thousand litres

 Industrial scale fermenter are of several hundred litres capacity

 There are mainly two types of vessels base on the type fermentation process

1. Small scale fermenter (Laboratory scale fermenter)

a. These are made up of glass

b. The large vessels are made up of borosilicate battery jars

c. They have a round or flat bottom and a top flanged carrying plate

d. They are smooth, non toxic and corrosion free

e. These vessels can be sterilized by autoclaving

f. It is feasible to examine the interior of the glass vessels

g. The diameter of the vessel is usually more than 50 cm

2. Large scale fermenter (Industrial scale fermenter)

a. As, stainless steel is the most satisfactory material, it is used to manufacture

vessels of high volume

b. These vessels can be sterilized in situ

c. They can withstand high pressure and corrosion

d. Corrosion resistance property is due to the thin hydrous film on the surface of
the metal

e. This film is stabilized by chromium

Project control No: RE-02091011297, Christ College, Rajkot, Gujarat, India

 NMEICT-MHRD (Govt. of India) Project on - Creation of e-Contents on Fermentation Technology

f. This film is continuous, non-porous, insoluble and self-heating

g. The corrosion resistance property of the vessel can be improved by mixing

tungsten, silicone and other elements at the time of manufacturing

Impeller (Agitator)

 This device is use for agitation (mixing up) of the medium

 Agitation creates a uniform environment in which all organisms remain in continuous

contact with medium resulting in maximum up take of the nutrient.

 It also increase the air bubble path generated from the sparger (aeration device) hence
more time to dissolve oxygen in the medium

 The impeller achieves a number of mixing objectives like suspension of solid

particles, bulk fluid and gas phase mixing
 There are various types of impellers

1. Disc turbine

2. Vaned disc

3. Open turbine

4. Marine propeller

Sparger

 This device is used for aeration

 Aerobic fermentation process require sufficient oxygen to the microorganisms for

metabolic requirements

 Depending on volume of medium in the fermentation vessel, different types of

spargers are installed in the fermenter.

1. Porous sparger

a. It is made up of sintered glass or ceramics

b. It is used on the laboratory scale in non-agitated vessel

2. Nozzle sparger

a. It is a partially closed or single open pipe which provides stem to the air bubbles

b. As nozzle sparger causes a lower pressure and does not get blocked, they are used
as a single nozzle

Project control No: RE-02091011297, Christ College, Rajkot, Gujarat, India

 NMEICT-MHRD (Govt. of India) Project on - Creation of e-Contents on Fermentation Technology

3. Combined sparger – agitator

a. It introduced air through a hollow agitator shaft

b. The holes are drilled in the disc, which remains connected to the base of the main
shaft from where it is emitting the air bubbles
c. It provide excellent aeration in a baffled vessel

 The efficiency of aeration depends on operation of agitator at a range of Revolution

Per Minutes (RPM)

Baffels

 This device is used to avoid the vortex formation generated during the agitation of the
medium

 Baffles are made up of metal strips attached 900 to the wall of fermentation vessel

 The diameter of the baffles is nearly one tenth of the vessel diameter

 The gap between the vessel wall and the baffles strips should be maintain in such a
way that scouring action of the minimise microbial growth on the walls of the
fermenter

Foam control

 A medium rich in protein when subjected to agitation, it generate foam

 If the excessive foaming is not prevented, it results in the leakage of the medium from
the lid of the fermentation vessel and hence lead to the contamination of the
fermentation medium

 A foam sensing devised is usually installed from the lid in the fermenter, set at a
definite level above the broth surface

 When the foam rises and touches the probe tip, a signal is generated in form current
and pass through the circuit of the probe and gives a signal

 If the fermentation operation is automatic, then the signal triggers the pump and
antifoam agent is released within seconds mechanically or robotically

 It is also possible to add antifoam manually in case the process is not automatic

Temperature controlling (heating and cooling) devices

 Mechanical agitation and exothermic microbial metabolic activity generates heat

during the fermentation process

 Endothermic microbial metabolic activity lower down the temperature of the

fermentation medium

Project control No: RE-02091011297, Christ College, Rajkot, Gujarat, India

 NMEICT-MHRD (Govt. of India) Project on - Creation of e-Contents on Fermentation Technology

 To maintain this temperature, heat is to be either added to or removed from the system

 The cooling system is used to remove excess heat from the system

 Internal heating coils are used for providing heat (Note: In case of lab scale process,
the fermenter is placed in thermostatically controlled bath)

Feed ports

 Feed ports are the tubes ( for Lab scale fermenter) and pipelines (for large scale
fermenter) connected to the nutrient reservoir

 These tubes or pipelines are used to add nutrients and acid/alkali in the fermenter
before and during the fermentation process

 They are heat sterilized in situ and /or ex situ with stem

 It is advisable to sterilize after connection has been done and before any additions are
made

Flow regulation and controlling devices (i.e. Valves)

 Five types of valves are used.

1. Safety valves

a. Any pipe layout which work under pressure are incorporated with these safety valves
to

b. These valves protect the pipe layout and ensures that the pressure never go beyond the
upper limit of the specified value

2. Globe valves

a. These valves do not regulate the flow of steam or water

b. They are suitable for general purposes use like completely opened or completely
closed

3. Butterfly valves

a. When the diameter of the pipes is large and there is low or no pressure butterfly vales
are ideal choice

b. These valves do not ensure aseptic operation

4. Ball valves

a. These valves are appropriate when aseptic condition is required

b. These valves can also be operated under high temperature

Project control No: RE-02091011297, Christ College, Rajkot, Gujarat, India

 NMEICT-MHRD (Govt. of India) Project on - Creation of e-Contents on Fermentation Technology

c. Ball valves can handle mycelia broths

5. Diaphragm valves

a. They are used for flow regulation

Sealing assembly

 Stirrer shaft, a device providing agitation must be sealed properly ensuring long term
aseptic operation

 There are various types of sealing assembly available in the market, of which three
are mainly used

1. Mechanical seal

a. Made up of a stationary part in the bearing and the rotating part on the shaft

b. A spring is used to press these two components together

c. A suitable lubricant should be apply to ensure friction free smooth rotation

and control the heat generation at the point of stationary and moving parts of
the seal

2. Packed gland seal

a. Several layers of rings made up of asbestos are used to seal the shaft

b. Periodical monitoring and replacement of these rings advisable to prevent the

penetration of heat

3. Magnetic drives

a. This assembly is made up of two magnets

b. The driving magnet is held in bearing on the outside of head plate and
connected to the drive shaft

c. The driven magnet is placed on one end of the impeller shaft and held in
bearings on the inner surface of the top plate

Project control No: RE-02091011297, Christ College, Rajkot, Gujarat, India

 NMEICT-MHRD (Govt. of India) Project on - Creation of e-Contents on Fermentation Technology

Summary: Functions of various parts of a fermenter

Sr. Parts of fermenter Function

To stir the media continuously and hence prevent
1 Impellor (agitator) cells from settling down, and distribute oxygen
throughout the medium
Introduce sterile oxygen to the media in case of
2 Sparger (Aerator)
aerobic fermentation process
3 Baffles (vortex breaker) Disrupt vortex and provide better mixing
4 Inlet Air filter Filter air before it enter the fermenter
5 Exhaust Air filter Trap and prevent contaminants from escaping
6 Rotameter Measure flow rate of Air or liquid
7 Pressure gauge Measure pressure inside the fermenter
Measure and monitor change in temperature of
8 Temperature probe
the medium during the process
To maintain the temperature of the medium
9 Cooling Jacket
throughout the process
10 pH probe Measure and monitor pH of the medium
11 Dissolve Oxygen Probe Measure dissolve oxygen in the fermenter
12 Level probe Measure the level of medium
13 Foam probe Detect the presence of the foam
Maintain the required pH of the medium by
14 Acid
neutralizing the basic environment
Maintain the required pH of the medium by
15 Base
neutralizing the acidic environment
16 Antifoam Breakdown and prevent foams
17 Sampling pint To obtain samples during the process
18 Valves Regulation and control the flow liquids and gases
19 Control panel Monitor over all parameters

Project control No: RE-02091011297, Christ College, Rajkot, Gujarat, India

 NMEICT-MHRD (Govt. of India) Project on - Creation of e-Contents on Fermentation Technology

References

 Principles of Fermentation Technology: (2nd edition, by Peter F. Stanbury, Allan

Whitaker and Stephen J. Hall, Butterworth-Heinemann, An imprint of Elsevier Science.)
 Industrial Microbiology: (By Casida L. E.New Age international (P) ltd publications)
 A Text Book of Industrial Microbiology: (2nd edition By Wulf Crueger & Anneliese
Crueger)
 Biotechnology: Food Fermentation Microbiology, Biochemistry & Technology Vol. 1
& 2:(By V.K. Joshi & Ashok Pandey)
 Manual of Industrial Microbiology and Biotechnology: (2nd Edition by Arnold L.
Demain and Julian E. Davies, Ronald M. Atlas, Gerald Cohen, Charles L. Hershberger,
Wei-Shou Hu, David H. Sherman, Richard C. Willson and J. H. David Wu)
 Industrial Microbiology-An introduction: By Michael J. Waites, Neil L. Morgan,
John S. Rockey and Gary Higton)
 Comprehensive Biotechnology-The Principles, Applications and Rugulations of
Biotechnology in Industry, Agriculture and Medicine: (By Mrray Moo Young)
 Fermentation Technology : Up Stream Fermentation Technology- Vol-I: (By H. A.
Modi-Pointer Publications)
 Fermentation Technology : Down Stream Fermentation Technology- Vol-II: (By H. A.
Modi-Pointer Publications)
 Industrial Microbiology by Prescott and Dunn's: (4th edition, edited by Gerald Reed,
CBR publications)
 Fermentation Technology: (By M.L. Srivastava, NAROSA publications)
 Industrial Microbiology: (By A.H. Patel)
 International student edition: Microbiology- A laboratory Manual: (4th edition. By
James G. Chappuccino & Natalie Sherman)
 Bacteriological Techniques: (By F.J. Baker)
 Introduction to Microbial Techniques: (By Gunasekaran)
 Mannual of Industrial Microbiology and Biotechnology: (2nd Edition by Arnold L.
Demain and Julian E. Davies, Ronald M. Atlas, Gerald Cohen, Charles L. Hershberger,
Wei-Shou Hu, David H. Sherman, Richard C. Willson and J. H. David Wu)

Web references

 http://www.homebrew.net/ferment/
 http://www.soyinfocenter.com/HSS/fermentation.php
 http://www.ensymm.com/pdf/ensymm_fermentation_abstract.pdf
 http://scialert.net/fulltext/?doi=jm.2007.201.208
 http://aem.asm.org/content/7/1/57.full.pdf
 http://www.slideshare.net/yongkangbirdnest/lecture-4-sterilization
 http://www.ars.usda.gov/research/publications/publications.htm?seq_no_115=140721
 http://www.scribd.com/doc/30706834/Fermentation-Design
 http://www.wiley-vch.de/books/sample/3527318194_c01.pdf

Project control No: RE-02091011297, Christ College, Rajkot, Gujarat, India

 NMEICT-MHRD (Govt. of India) Project on - Creation of e-Contents on Fermentation Technology

 http://www.engineersirelandcork.ie/downloads/Biopharmaceuticals%2020Jan09%20-
%202%20-%20Ian%20Marison%20DCU.pdf
 www.yobrew.co.uk/fermentation.php
 http://bioscipub.com/journals/bbb/pdf/19-24.pdf
 http://gertrude-old.case.edu/276/materials/web/immobilizedenzymereview.pdf
 http://download.bioon.com.cn/upload/month_0902/20090223_b809d1c59ba2a6e2abfdJt
WiJOiFDm02.attach.pdf
 http://bioprocess-maulik.blogspot.in/2007/07/design-of-industrial-fermentation.html
 http://hsc.csu.edu.au/biology/options/biotechnology/3051/biotechnologyPart3.html
 http://www.rsc.org/ebooks/archive/free/BK9780854046065/BK9780854046065-
00001.pdf
 http://www.biotech.upm.edu.my/academics/On%20Line%20Note/Bioprocess/BTK%205
301/Lect6%28Inoculum%20Preparation%20and%20Development%29.pdf
 http://www.biotechresources.com/services-strain.shtml
 http://www.idosi.org/wjc/4%281%2909/14.pdf
 http://cheserver.ent.ohiou.edu/Paper-gu/DualFeed.pdf

Project control No: RE-02091011297, Christ College, Rajkot, Gujarat, India