Saturday, April 11, 2020, 10:07 AM
PAGE NO. 1
****************************************************
* *
* STAAD.Pro *
* Version 2007 Build 04 *
* Proprietary Program of *
* Research Engineers, Intl. *
* Date= APR 11, 2020 *
* Time= 10: 0:35 *
* *
* USER ID: *
****************************************************
1. STAAD SPACE
INPUT FILE: PS-21.STD
2. START JOB INFORMATION
3. ENGINEER DATE 12-FEB-20
4. JOB NAME PIPE SUPPORTS
5. JOB CLIENT KSEW
6. JOB NO 28-501
7. ENGINEER NAME AQ
8. CHECKER NAME AZ
9. APPROVED NAME MSK
10. CHECKER DATE 12-FEB-20
11. APPROVED DATE 12-FEB-20
12. END JOB INFORMATION
13. INPUT WIDTH 79
14. UNIT METER KN
15. JOINT COORDINATES
16. 1 0 0 0; 2 1 0 0; 3 0 1 0; 4 1 1 0; 5 1.15 1 0; 6 -0.15 1 0
17. MEMBER INCIDENCES
18. 1 1 3; 2 3 4; 3 4 2; 4 4 5; 5 3 6
19. DEFINE MATERIAL START
20. ISOTROPIC STEEL
21. E 2.05E+008
22. POISSON 0.3
23. DENSITY 76.8195
24. ALPHA 1.2E-005
25. DAMP 0.03
26. END DEFINE MATERIAL
27. MEMBER PROPERTY AMERICAN
28. 1 TO 5 TABLE ST W4X13
29. CONSTANTS
30. BETA 90 MEMB 1 3
31. MATERIAL STEEL ALL
32. SUPPORTS
33. 1 2 FIXED
34. DEFINE UBC LOAD
35. ZONE 0.2 I 1.25 RWX 4.5 RWZ 4.5 STYP 4 NA 1 NV 1
36. SELFWEIGHT 1
37. MEMBER WEIGHT
38. 2 UNI 1.21
39. LOAD 1 LOADTYPE NONE TITLE EQ-X
40. UBC LOAD X 1
E:\Users\Ali Zaidi\Desktop\Supports\REV 2\PS-021 Working -\Ps-021 Staad Model\PS-21.anl Page 1 of 6
Saturday, April 11, 2020, 10:07 AM
STAAD SPACE -- PAGE NO. 2
41. LOAD 2 LOADTYPE NONE TITLE EQ-Z
42. UBC LOAD Z 1
43. LOAD 3 LOADTYPE NONE TITLE DEAD LOAD
44. SELFWEIGHT Y -1
45. LOAD 4 LOADTYPE NONE TITLE PIPE LOAD
46. MEMBER LOAD
47. 2 UNI GY -1.5
48. 2 UNI GZ 0.45
49. 2 UNI GX 0.15
50. LOAD COMB 100 DL + PL
51. 3 1.0 4 1.0
52. LOAD COMB 200 DL + PL + 0.714EQ-X
53. 1 0.714 3 1.0 4 1.0
54. LOAD COMB 300 DL + PL +0.714EQ-Z
55. 2 0.714 3 1.0 4 1.0
56. PERFORM ANALYSIS
P R O B L E M S T A T I S T I C S
-----------------------------------
NUMBER OF JOINTS/MEMBER+ELEMENTS/SUPPORTS = 6/ 5/ 2
SOLVER USED IS THE IN-CORE ADVANCED SOLVER
TOTAL PRIMARY LOAD CASES = 4, TOTAL DEGREES OF FREEDOM = 24
**WARNING: IF THIS UBC/IBC ANALYSIS HAS TENSION/COMPRESSION
OR REPEAT LOAD OR RE-ANALYSIS OR SELECT OPTIMIZE, THEN EACH
UBC/IBC CASE SHOULD BE FOLLOWED BY PERFORM ANALYSIS CHANGE.
***********************************************************
* *
* X DIRECTION : Ta = 0.085 Tb = 0.032 Tuser = 0.000 *
* T = 0.032, LOAD FACTOR = 1.000 *
* UBC TYPE = 97 *
* UBC FACTOR V = 0.1944 x 1.84 = 0.36 KN *
* *
***********************************************************
E:\Users\Ali Zaidi\Desktop\Supports\REV 2\PS-021 Working -\Ps-021 Staad Model\PS-21.anl Page 2 of 6
Saturday, April 11, 2020, 10:07 AM
STAAD SPACE -- PAGE NO. 3
***********************************************************
* *
* Z DIRECTION : Ta = 0.085 Tb = 0.035 Tuser = 0.000 *
* T = 0.035, LOAD FACTOR = 1.000 *
* UBC TYPE = 97 *
* UBC FACTOR V = 0.1944 x 1.84 = 0.36 KN *
* *
***********************************************************
57. LOAD LIST 100 200 300
58. PARAMETER 1
59. CODE AISC
60. CHECK CODE ALL
E:\Users\Ali Zaidi\Desktop\Supports\REV 2\PS-021 Working -\Ps-021 Staad Model\PS-21.anl Page 3 of 6
Saturday, April 11, 2020, 10:07 AM
STAAD SPACE -- PAGE NO. 4
STAAD.Pro CODE CHECKING - (AISC 9TH EDITION)
***********************
ALL UNITS ARE - KN METE (UNLESS OTHERWISE NOTED)
MEMBER TABLE RESULT/ CRITICAL COND/ RATIO/ LOADING/
FX MY MZ LOCATION
=======================================================================
1 ST W4X13 (AISC SECTIONS)
PASS AISC- H1-3 0.032 200
0.87 C 0.08 -0.22 0.00
2 ST W4X13 (AISC SECTIONS)
PASS AISC- H1-3 0.021 200
0.07 C -0.05 -0.16 0.42
3 ST W4X13 (AISC SECTIONS)
PASS AISC- H1-3 0.042 200
1.25 C -0.13 -0.22 1.00
4 ST W4X13 (AISC SECTIONS)
PASS SHEAR -Y 0.000 100
0.00 T 0.00 0.00 0.00
5 ST W4X13 (AISC SECTIONS)
PASS SHEAR -Y 0.000 100
0.00 T 0.00 0.00 0.00
61. FINISH
*********** END OF THE STAAD.Pro RUN ***********
**** DATE= APR 11,2020 TIME= 10: 0:36 ****
E:\Users\Ali Zaidi\Desktop\Supports\REV 2\PS-021 Working -\Ps-021 Staad Model\PS-21.anl Page 4 of 6
Saturday, April 11, 2020, 10:07 AM
STAAD SPACE -- PAGE NO. 5
************************************************************
* For questions on STAAD.Pro, please contact *
* Research Engineers Offices at the following locations *
* *
* Telephone Email *
* USA: +1 (714)974-2500 support@bentley.com *
* CANADA +1 (905)632-4771 detech@odandetech.com *
* UK +44(1454)207-000 support@bentley.com *
* NORWAY +47 67 57 21 30 staad@edr.no *
* SINGAPORE +65 6225-6158 support@bentley.com *
* INDIA +91(033)4006-2021 support@bentley.com *
* JAPAN +81(03)5952-6500 eng-eye@crc.co.jp *
* CHINA +86(411)8479-1166 support@bentley.com *
* THAILAND +66(0)2645-1018/19 support@bentley.com *
* *
* North America support@bentley.com *
* Europe support@bentley.com *
* Asia support@bentley.com *
************************************************************
E:\Users\Ali Zaidi\Desktop\Supports\REV 2\PS-021 Working -\Ps-021 Staad Model\PS-21.anl Page 5 of 6
Saturday, April 11, 2020, 10:07 AM
STAAD SPACE -- PAGE NO. 6
E:\Users\Ali Zaidi\Desktop\Supports\REV 2\PS-021 Working -\Ps-021 Staad Model\PS-21.anl Page 6 of 6
