Scribd
Upload
125 views2 pages

Oxytx 104: Oxygen Analyser

The OxyTx 104 is a surface-mounted, intrinsically safe oxygen analyser and transmitter that uses an electrochemical sensor to measure ambient oxygen levels between 0-25%. It has an IP66-rated housing, 4-20mA output, large LCD display, and push button calibration. Applications include chemical, pharmaceutical, food/beverage, and gas industries where it can transmit oxygen readings to a customer's control system.

Uploaded by

Vishal Kumar Jha
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
125 views2 pages

Oxytx 104: Oxygen Analyser

The OxyTx 104 is a surface-mounted, intrinsically safe oxygen analyser and transmitter that uses an electrochemical sensor to measure ambient oxygen levels between 0-25%. It has an IP66-rated housing, 4-20mA output, large LCD display, and push button calibration. Applications include chemical, pharmaceutical, food/beverage, and gas industries where it can transmit oxygen readings to a customer's control system.

Uploaded by

Vishal Kumar Jha
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

OxyTx 104

Oxygen Analyser

Intrinsically safe, surface mounted,


two-wire loop powered oxygen
analyser / transmitter with
electrochemical sensor
technology for 0-25% oxygen
measurement.

Features
• Intrinsically Safe Area/Zone device with an IP66 • Large 4 Digit LCD display for local
ABS housing % O2 concentration readout

• Certified for use in hazardous areas when • Analogue 4-20mA Output for
powered by an intrinsically safe barrier retransmission of measured signal

• Non Intrusive user calibration by


push buttons

Applications Overview
A Oxygen Gas Detector/Transmitter for use in: The OxyTx 104 is an Intrinsically Safe
Fixed Gas Analyser / Transmitter. It is
• Chemical Industry
a surface mounted device with a
• Pharmaceutical industries remote mounting 'Bullet' sensor and
is suitable for locating within
• Food & beverage industries hazardous areas.
• Process & Gas generation industries
The OxyTx 104 is designed to
measure Ambient Oxygen in the
range 0-25%.

Comes complete with Bullet Sensor


as part number 02-409. The sensor is
remote mounted for ease of use and
maintenance.

EXCELLENCE Datasheet:
THROUGH DIVERSITY D-02-409-P-002
OxyTx 104
Product specifications
Gas Type / Range Oxygen (O2) / 0 - 25%
Sensor Type Electrochemical Sensor (OC-2 / OC-16 / OC-21)
Sensor Life 12 months
Response Time (T90) <20 seconds
Power Requirements 2-Wire Loop Powered 7-30 VDC (24VDC nominal)
suitable 4-20mA Interface circuitry
Mounting Surface mount by 2 x fasteners (M6)
Display 4 Digit LCD
Environmental Rating IP66
Operating Humidity 0 to 95% RH non-condensing
Analogue Output 4 to 20mA current loop powered
Resolution 0.1%
Temperature range -20°C to +40°C
User Interface 4 Push Buttons
Material ABS with Stainless steel identification label
Dimensions 140mm (h) x 122mm (w) x 75mm (d)
Weight 800 grams
ATEX Certification ATEX II 2 G EEx ia II C T4

OxyTx 104
Application setup

4-20mA /RS232
Sensor
Customer’s
OxyTx 104 Control System

OxyTx 104
Ordering information
Product Sensor Type Measurement Range Enclosure Type Part No.
OxyTx 104 Electrochemical 0 - 25% Surface Mount 02-409

CONTACT: Mullaghboy Industrial Park, Navan, Co. Meath, Ireland


PHONE: +353 (0)46 907 1333 | FAX: +353 (0)46 907 1331
EXCELLENCE EMAIL: sales@ntron.com

THROUGH DIVERSITY www.ntron.com

You might also like